daniel_new
-
Posts
3 -
Joined
-
Last visited
Posts posted by daniel_new
-
-
hi there, im daniel from germany, im very interested in the dsm self build nas. computer is a hobby, but im not a pro-pro-sumer, just a windows user
i hope i can build my own nas to play around with it and my existing ds116 (wanted to get a ds718+) OR selfmade even better ^^
regards
-
hi folks,
i wanted to buy this mainboard :
ASRock J5005-ITX
THE NETWORK CARD IS Realtek RTL8111H
STORAGE CONTROLLER :
2 x SATA3 6.0 Gb/s Connectors, support NCQ, AHCI and Hot Plug
- 2 x SATA3 6.0 Gb/s Connectors by ASMedia ASM1061, support NCQ, AHCI and Hot Plug8 GIG RAM
1 SSD 128 as system drive
1 6tb wd red as nas drive (maybe later raid setup)
i wanted to use the 918+ pat file.
could anyone explain me, how to install the dsm setup onto the ssd without booting from a usb stick ?
or if this is not supported, WHY ? because of UEFI things ? or else..
how to install the software correctly ?
i understood the following :
i need a pat file. i need a usb stick to boot from all the time ?
1000 thanks to anyone who could describe me in short words, how to install dsm on that machine ?
regards
danni
Compatible Hardware for NAS DSM ?
in The Noob Lounge
Posted
you write
you tried to install the 918 + PATTERN ONTO SSD, that failed ?
but then you reached it to install a 3617xs PAT file ?
(can you explan me how you did it ?)
1.) format USB stick
2.) ? copy juns bootloader to usb stick ?
3.) copy the PAT file to usb stick
4.) change BIOS boot order permanently to USB stick (i could use an USB SSD instead?)
thanks again, my brain just wants to figure out the theoretically part
dan