hi folks,
i wanted to buy this mainboard :
https://www.alternate.de/html/product/1438885?gclid=CjwKCAjw7cDaBRBtEiwAsxprXXaqhjnerwSoG8NoiSCDAuHjdu-CXuC-Scas5ETYMenDSnrNe4x3QBoCi54QAvD_BwE
ASRock J5005-ITX
THE NETWORK CARD IS Realtek RTL8111H
STORAGE CONTROLLER :
2 x SATA3 6.0 Gb/s Connectors, support NCQ, AHCI and Hot Plug
- 2 x SATA3 6.0 Gb/s Connectors by ASMedia ASM1061, support NCQ, AHCI and Hot Plug
8 GIG RAM
1 SSD 128 as system drive
1 6tb wd red as nas drive (maybe later raid setup)
i wanted to use the 918+ pat file.
could anyone explain me, how to install the dsm setup onto the ssd without booting from a usb stick ?
or if this is not supported, WHY ? because of UEFI things ? or else..
how to install the software correctly ?
i understood the following :
i need a pat file. i need a usb stick to boot from all the time ?
1000 thanks to anyone who could describe me in short words, how to install dsm on that machine ?
regards
danni