Mr Dini
-
Posts
2 -
Joined
-
Last visited
Posts posted by Mr Dini
-
-
Hi,
Well, I am a newbie here, and it is a bit off, so sorry for that. But I am looking for help with the DSM porting, and I thought this is the best place where I Can ask my questions.
I have an ARMv5 NAS, and I decided to install the DSM-111's fw on it (6.1.5 extracted from the pat file). It boots up fine, and I Can see the Diskstation login: over serial console. But I have no NIC support. Maybe because the kernel doesn't support my RTL8168 NIC by default?
I Could see these errors and informations in the console about the network:
[ 10.950000] ERROR: sflash_probe - Failed to initialize the SFlash.Loading Marvell Ethernet Driver: [ 10.960000] o Cached descriptors in DRAM [ 10.960000] o DRAM SW cache-coherency [ 10.970000] o 2 Giga ports supported [ 10.970000] o Single RX Queue support - ETH_DEF_RXQ=0 [ 10.970000] o Single TX Queue support - ETH_DEF_TXQ=0 [ 10.980000] o TCP segmentation offload (TSO) supported [ 10.980000] o Receive checksum offload supported [ 10.990000] o Transmit checksum offload supported [ 10.990000] o SKB Recycle supported - (Enabled) [ 11.000000] o Rx descripors: q0=128 [ 11.000000] o Tx descripors: q0=532 [ 11.010000] o Loading network interface(s): [ 11.010000] o register under mv88fx_eth platform [ 11.020000] o eth0, ifindex = 2, GbE port = 0 [ 11.020000] o eth0, phy chipid = fffffff0, Support WOL = 0 [ 11.030000] [ 11.030000] Warning: Giga 1 is Powered Off
cat: can't open '/proc/sys/kernel/syno_skip_vender_mac_interfaces': No such file or directory [ 21.930000] eth0: started udhcpc (v1.16.1) started eth0 Link encap:Ethernet HWaddr <removed> UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:532 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:11 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)Also, I tried to compile the kernel module manually, but as I Could see, the magic numbers are differs.
$ readelf -h ./8192cu.ko ELF Header: Magic: 7f 45 4c 46 01 01 01 00 00 00 00 00 00 00 00 00 Class: ELF32 Data: 2's complement, little endian Version: 1 (current) OS/ABI: UNIX - System V ABI Version: 0 Type: REL (Relocatable file) Machine: ARM Version: 0x1 Entry point address: 0x0 Start of program headers: 0 (bytes into file) Start of section headers: 6346960 (bytes into file) Flags: 0x5000000, Version5 EABI Size of this header: 52 (bytes) Size of program headers: 0 (bytes) Number of program headers: 0 Size of section headers: 40 (bytes) Number of section headers: 5069 Section header string table index: 5066 $ readelf -h ./lib/modules/2.6.32.12/kernel/net/netfilter/nf_conntrack.ko ELF Header: Magic: 7f 45 4c 46 01 01 01 61 00 00 00 00 00 00 00 00 Class: ELF32 Data: 2's complement, little endian Version: 1 (current) OS/ABI: ARM ABI Version: 0 Type: REL (Relocatable file) Machine: ARM Version: 0x1 Entry point address: 0x0 Start of program headers: 0 (bytes into file) Start of section headers: 37228 (bytes into file) Flags: 0x600, GNU EABI, software FP, VFP Size of this header: 52 (bytes) Size of program headers: 0 (bytes) Number of program headers: 0 Size of section headers: 40 (bytes) Number of section headers: 265 Section header string table index: 262
The first one is the original one, and the second one is a manually compiled module using the Marvell 6281 6.1 GPL sources. I think it won't work because of the small difference... :\ Or will it?
What I am doing wrong?
Thanks a lot!
Compile kernel modules for DS-111's DSM?
in Software Modding
Posted · Edited by Mr Dini
I just had to use a different toolchain. Now I Can compile kernel modules with the same magic number.
But, I Cannot compile the r8168 module using the provided kernel sources. it says that:
What Can I do?