[Loader for Kaby Lake]

many thanks for that clear statement. just checked: return shipping of my components is possible.

many thanks for all your support.

 

 

 

[Loader for Kaby Lake]

i am ok with 916 loader if it works but using this i still only got 3 codecs activated. My cpu has 14 !

i was asking you as you are the only who answeres my questions here (many thanks for that)

 

I read a lot and found many indicators looking like DS918+ (4.4 Linux, Instructionset extensions SSE4.1/4.2 , Kaby lake support)

 

What is future of XPENOLOGY ? Will there be a support for Kaby lake and latest features ?

[Loader for Kaby Lake]

@Polanskiman: sorry fo rmy persistenty but HW-Transcoding is most important feature for me and i still have no solution.

Will there be a loader for DS918+  ?

[What is best CPU for 4K Hardware Transcoding ?]

i like to have your review for my analysis for best CPU for 4K transcoding.

My targets: as much as possible codecs via hardware transcoding, less costs (<80€) , best for future 4K usage

 

During my analysis i checked latest Synology models (here: DS918+) using hardware transcoding (see overview table here: link)

Also i added currently used by XPENOLOGY (here: DS916, DS3615, DS3617)

And latest my choise; Pentium G4600

 

Overview

DS918+    Intel Celeron J3455 (Appollo lake)

DS916      Intel Pentium N3710 (Braswell)

DS3615    Intel Core i3-4130 (Haswell)

DS3617    Intel Xeon D-1527 (Broadwell)

My CPU    Intel Pentium G4600 (Kaby Lake)

 

after full compare

https://ark.intel.com/compare/95594,91830,77480,91195,97453

i could sort out

- Pentium N3710 ($161) and Xeon ($259) and i3-4130($117) as too expensive

 

Update:

https://ark.intel.com/compare/95594,97453

 

Then i had a look to future of 4K transcoding here and here and here

 

and made comparism (did not found available CPU with AV1 Codec )

https://www.technikaffe.de/cpu_vergleich-intel_celeron_j3455-662-vs-intel_pentium_g4600-700

 

especially the table with codecs shows me that for me Pentium G4600 is best

 

-  70€ (link, sorry in german)

- many codec in hardware and h265 10 bit support

- also T-Version with 35watts is available

 

please share your analysis and give me hints if i forgot impotant things for future

 

[Loader for Kaby Lake]

no, it's valid (genuine) one

 

can you please check if this is root cause for my topic ?

 

[DS918+ Bootloader - Help Needed]

hello all who are working on "kaby lake" or DS918+ Loader.

 

you will be my heros if you make that happen soon

 

As my NAS is still in status "waiting for Hardware transcoding support" i can work as an Beta-Tester if you want.

 

 

 

[DS916+ loader DSM 6.1 i7 3770T]

if i understand right your i7 3770T has only one Hardware codec. Here comparism with the one i used

https://www.technikaffe.de/cpu_vergleich-intel_pentium_g4600-700-vs-intel_core_i7_3770-322

 

i am going same "trial on error" for Hardware transcoding but up to now only got 3 codec's activated. I read all the posts releated to that topic but found only questions but no solutions. I looked to newest Synology Hardware (e.g. DS918+) which is able too but did not get an answer why there is no XPENOLOGY loader lake that.

 

A valid serial number is needed.

For check via telnet look here, only with DS916 loader i got the clickbox for "Hardwarebeschleunigung aktivieren" in Video Station.  Installing Emby added hevc_dec in my case (maybe it installs ffmeg ? )

 

@Polanskiman: please help us

[Loader for Kaby Lake]

serial no is valid !

[Loader for Kaby Lake]

again i have questions for Kaby Lake and transcoding:

using XPENOLOGY 916 loader and install i see Linux 3.10 and braswell_916+

 

Synology DS918+ is nearest to my scenario using Linux 4.4 and Apollo Lake

 http://www.synology-forum.de/showthread.html?88172-DS218-DS718-und-DS918-veröffentlicht/page6

 

Using 916 loader i came to a good result (many thanks to all developers) . All features are running but only minimal support for transcoding.

 

But my CPU has more capabilities !!!!!!!!!!!

 

Is there any change to reach same status as DS918 on XPENOLOGY (Linux 4.4 , Full Apollo Lake support) ?

 

Thanks for your help

 

[Welcher Bootloader für Intel® G4560]

klinke mich da mal ein.

Weiss jemand, wie ich prüfen kann , ob transcoding funktioniert ? Habe überall transcoding eingeschaltet und keine Fehler. CPU-Last ist max 12% oder so (Pentium G4600) ob ich transcoding einschalte odr nicht. Gibt es ein Test-Szenario ?

[Loader for Kaby Lake]

sorry , i am not an expert and already read what you have linked but not clear if DS3615xs (as you recommend) is right fo me. I want an stable software for my usecases and i am not able to understand all the topics. Also i don't like to install all my Photos , Movies again if i have to move later.

 

So please help me

 

What i found:

CPU from DS3615XS is quite older than my one. I bought that CPU because is want to use all the new features -> for all the differences i like to know if it works

 

Example: is DS3615XS able to work with H256 10bit ?

 

[Do not see media server from TV/Windows]

now i tried again to configure LACP -> it works but i coult not see may nas afterwards.

After som investigation i found that enabling of IGMP Snooping was the reason -> after disable it, i could see my nas using LACP, means 2 LAN

 

But IGMP Snooping is needed to use Telekom-Entertain

 

Can anybody help here to get both working ?

 

[Loader for Kaby Lake]

still not clear which loader i need:

a) want to use link aggregation as mobo has 2 LAN (alredy works with TL-SG2008 switch) -> do i need 2 Serial numbers as i have 2 Mac adresses ?

b) want to use kaby lake transcoding engine in Pentium G4600 -> is 3615 image supporting that (anywhere i red some different notes) or is it better to go for 918 loader ?

c) Do i need to register @Synology with both Mac Adresses to use Video station transcoding ?

d) whats about linux kernel version (3.x or 4.x) : is one of both better for using transcoding or kaby lake ?

[Do not see media server from TV/Windows]

i am happy to announce that problem was found: i am using Mobo with 2 LAN and i only gave one in grub.cfg but using the other.

[Do not see media server from TV/Windows]

PC , NAS , TV are in Home network (same Gateway). From PC using Win Media Player i can see in Homenet two other Media Servers (one from FritzBox and one from TV which has feature of a own server) but not my NAS.  From TV i can see 2 other Media Servers (one from FritzBox and ane from PC (win10 media server). Looking Videos and Pictures located @PC is working from TV using DLNA. From PC Ping is working to NAS and also My NAS was mounted to PC sucsessfully.  There is no dsvideo app on my panasonic. Also i want to look pictures also. Is there anything todo to enable DLNA after intallation ? Is DLNA working with DS3615 ?

[Do not see media server from TV/Windows]

Hello

since 4h after succsessfull installation of xpenology i now struggeling with connection to my TV/Windows PC.

Mediaserver is installed but i cannot see DLNA server even in my TV nor on my PC (e.g. MediaPlayer).

 

DMS-Log shows:

X-Content-Type-Options: nosniff
X-XSS-Protection: 1; mode=block
Cache-Control: max-age=0, no-cache, no-store, must-revalidate
Pragma: no-cache
Expires: 0

{"error":{"code":117},"success":false}

 

Is there any hint ? Thanks for help

 

[Loader for Kaby Lake]

Hello

i am new to this forum and Xpenology. I build up a System using Intel Pentium G4600 CPU (Kaby Lake) on Motherboard GIGABYTE GA-H270N-WiFi .

Which is right BootLoader for me and does it fully support these CPU ?  Thanks for your help.