Hi,
Yesterday i tried to created a new ESXI VM based on the new 918+ 1.04b loader by Jun. It booted fine, so I shutdown the VM and attached my SATA controller as a passthrough device. I got the option to migrate from the 3615xs to the 918+ and all went fine.
After my first login, I got the message that my Volume1 had crashed. Looking at the disks that Synology detects, i see the following:
- 2x 4TB WD RED
- 1x 50mb VMWare Virtual SATA HDD
What i would expect to see here, are my 4x 4TB WD RED. The 50mb VMware hdd is new for me, which make me believe i did something wrong in the VM config.
So i SSH'd into the device, and with fdisk I learned that all my 4x 4TB disks are detected. Theyre just not visible in the WEBUI. The RAID 5 (/dev/md2) consists of only 2 of 4 disks. Next thing is that I used mdam to stop and recreate the /dev/md2 raid5. I mounted the /dev/md2 to /volume1 again and I can see all my original files there. This makes be believe theres nothing wrong with the disks.
After this, i dont know how to proceed. I recreated the raid with mdam, but in the webui i still can only see my 2x 4TB and 1x 50mb. After a restart, i get the same volume crashed errors and I have to recreate the raid again.
Does anyone have any experience with this?
My VMDK file
synoboot.vmdk
This VMDK just links to the .img file. I have also tried converting the .img to a .vmk, but i get the same result.
Storage Manager
VM Settings
ESXI Hardware / Version