jobinjv
-
Posts
10 -
Joined
-
Last visited
Posts posted by jobinjv
-
-
I have a PC with the follwoing spec
Board: Gigabyte P85-D3
Processor: Core i3-4160
If i connect the HDD in the same sequence as the previous build, would I have any luck ?
-
Board: Gigabyte GA-890FXA-UD (rev. 1.0)
Processor: AMD AM3 Phenom II
OnBoard NIC: Realtek 8111D
USB: SanDisk Cruzer 32GB
Add-on NICs: Dlink DGE-560T (RTL8139 chipset), Tp-Link TG-3269 (RTL8169SC)
I tried to USB on my i3 Processor PC which has a 8169 Chipset, and it booted up and showed in Synology Assistant
-
I changed my nic yet, its the same now. I am not able to source any Intel NIC as well. A question, would I be able to get the raid back if I was to change to board and processor and connect back the present disks.
-
Now that i pulled out the USB and tried to insert back the old one, nothing happens. The screen stays ate Loading operating System.., nothing appears on Synology assistant, be it the old USB, new 1.02b or 1.03b loader.
-
After that it just fails. If I try to migrate of keep files and new settings, it just doesn't go beyond that
-
-
On 9/13/2017 at 0:51 PM, Polanskiman said:
The module used by that NIC should be r8169 which is included in the loader. Can you please try this extra.lzma ramdisk and tell me if it works:
extra8168deac.lzma 3.9 MB https://mega.nz/#!DQxzlDJA!AY0XYDS6ywnlDVPCov0a_nQNfmBhk48xW0i8bNjU04I
Well, in the end I thought what the heck to loose, so just did an image burn, pluged it and let it run. No ramdisk, vid, pid, mac chnage and surprisingly it showed up. So i uplugged and changed those values, without modify the ramdisk and now i have Xpenology up and running.
-
8 hours ago, Polanskiman said:
The module used by that NIC should be r8169 which is included in the loader. Can you please try this extra.lzma ramdisk and tell me if it works:
extra8168deac.lzma 3.9 MB https://mega.nz/#!DQxzlDJA!AY0XYDS6ywnlDVPCov0a_nQNfmBhk48xW0i8bNjU04I
I tried both the ramdisks
extra8168deac.lzma 3.9 MB https://mega.nz/#!DQxzlDJA!AY0XYDS6ywnlDVPCov0a_nQNfmBhk48xW0i8bNjU04Iextra8169deac.lzma 3.9 MB https://mega.nz/#!mIZEGLYb!10ZlXYmpop3GB4GPW_34txiriy4hSYBPPPU5-QgdtBYStill the same. Not able to discover the NAS. -
HI
I am trying the install on a Gigabyte GA-890FXA-UD motherboard, having AMD AM3 Phenom II. The NIC on board are a pair of Realtek 8111D and I have added a PCI TP-Link gigabit network adapter. I selected AMD from menu and it even booted to exactly the same screen as shown in the screenshot but It doesnt appear in find.synology.com or using the Synology Assistant.
Any help ?
Upgrade from 6.0.2 to 6.1.7 gone wrong
in General Installation Questions/Discussions (non-hardware specific)
Posted
Unlucky I should say none of the playing with bios worked in my case. I guess I will have to try moving the RAID on to a MB in the same sequence and have my fingers crossed it will work.