cseb
-
Posts
38 -
Joined
-
Last visited
Posts posted by cseb
-
-
hello, le driver hpsa ne fonctionne pas correctement, les disques ne sont pas reconnu.
j'ai installé une carte Ibm m1015 flashée en it-mode et de cette façon cela fonctionne.
-
hi patch available on the github but not for x86
-
Bonjour, j'ai le même problème de SN, lors que j'utilise DS Video. J'ai changé plusieurs fois de SN avec le nouveau format mais rien à faire. ll semblerait que les SN générés par cet outil :https://xpenogen.github.io/serial_generator/index.html soient blacklistés.
Connaissez vous un autre site pour en générer ?
Merci d'avance
-
Hi, same issue, can't find a valid SN . Someone can help me ?
Thanks
-
Unfortunately the p410 doesn't work with the last loader. Disk aren't correctly recognized.
-
Pour les variables tu vas dans dockers tu modifie ton conteneur, tu vas dans environnement et la tu crées les deux variable 1er colonne le nom 2eme la valeur. Ex : ServerIp 192.168.1.10
-
1
-
-
bonjour,
aucun script télécharge l'image : diginc-pi-hole rajoute les 2 variable et ca marche nikel
il faut créer les variable dans l'interface graphique de docker.
-
oui juste ca
bien faire attention au port
et tu peux rajouter une variable WEBPASSWORD avec le mot de passe de ton choix pour pouvoir te loguer sur l'interface web de pi hole dans mon cas sur le port 8000 donc "http://192.168.1.10:8000/admin"
-
Il faut créer une variable d'environnement : ServerIp avec l'adresse ip de ton syno comme valeur
-
Hi, I'm using a M1015 and all work fine
-
14 hours ago, IG-88 said:
a goog choice are the lsi (now broadcom) controllers in IT mode, reliable but not cheap
some people use cheaper controllers with 2/4/8 sata ports based on marvell, you shoud have a closer look on the build, dont use controllers with miltiplex chip, only use the controller with real full speed sata ports
you might search the forum for syba and marvell
also keep in mind, if its not running with the AHCI driver and need a kernel driver to check if its availible for dsm 6.1
https://ata.wiki.kernel.org/index.php/Hardware,_driver_status
Thanks for your answer.
What do you think about this cards :
LSI MEGARAID 9266-8i
-
Hi, is someone tryed to use a sas controller with the last loader of Jun?
And which controler works?
Personnaly I have tryed to use hp p410 with the hpsa.ko and that don't work.
@IG-88 has compiled several versions of the driver but nothing work.
Thanks
-
Здравствуйте,
прежде всего, извиниться за русский аппроксимативный, я использую переводчика. Я столкнулся с проблемой с gen8 и картой HP P410 SAS. Я попытался скомпилировать драйверы, предоставленные в источниках 6.1. Это позволяет мне видеть мои записи, но они плохо распознаются. У меня есть ядро oops для определения емкости диска. В 5.2 все функции правильно. Кто-нибудь когда-либо управлял драйвером HPSA.ko? спасибо
-
14 hours ago, IG-88 said:
there is a new test version 3.2 with folowing changes
-extenel source - Realtek RTL8152/RTL8153 Based USB Ethernet Adapters r8152.ko (0008-r8152.53-2.09.0.tar.bz2) -> already tested and ok -external source Broadcom Tigon3 tg3.ko (tg3_linux-3.137k.tar.gz) -> ??? -external source - HP Smart Array SAS hpsa.ko (hpsa-3.4.20-100.tar.bz2) -> ???http://s000.tinyupload.com/?file_id=91168375327128238944
Thanks for the news version of the extra but the HPSA make a opps :
:: Loading module hpsa[ 3.320219] BUG: unable to handle kernel NULL pointer d ereference at (null) [ 3.358228] IP: [<ffffffffa0223f6d>] hpsa_slave_alloc+0x3d/0x1f0 [hpsa] [ 3.389973] PGD 1422d6067 PUD 141f1d067 PMD 0 [ 3.411463] Oops: 0000 [#1] SMP [ 3.426932] Modules linked in: hpsa(O+) 3w_sas 3w_9xxx aic94xx aacraid sx8 mp t3sas mpt2sas(O) megaraid_sas ata_piix mptctl mptsas mptspi mptscsih mptbase scs i_transport_spi megaraid megaraid_mbox megaraid_mm vmw_pvscsi BusLogic usb_stora ge etxhci_hcd xhci_hcd uhci_hcd ohci_hcd ehci_pci ehci_hcd usbcore usb_common el 000(O) [ 3.564153] CPU: 0 PID: 3732 Comm: insmod Tainted: G O 3.10.102 #15 047 [ 3.599530] Hardware name: HP ProLiant MicroServer Gen8, BIOS J06 11/02/2015 [ 3.633709] task: ffff8801422caa70 ti: ffff880141f6c000 task.ti: ffff880141f6 c000 [ 3.671396] RIP: 0010:[<ffffffffa0223f6d>] [<ffffffffa0223f6d>] hpsa_slave_a lloc+0x3d/0x1f0 [hpsa] [ 3.719434] RSP: 0018:ffff880141f6f720 EFLAGS: 00010046 [ 3.745227] RAX: 0000000000000282 RBX: ffff880141f78000 RCX: 000000000000000b [ 3.779835] RDX: 0000000000000000 RSI: 0000000000000202 RDI: ffff880141f78240 [ 3.814268] RBP: ffff880141f78240 R08: 0000000000000000 R09: 000000000000fffb [ 3.848848] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88013f897800 [ 3.883527] R13: 0000000000000000 R14: ffff88013f66e028 R15: 0000000000000000 [ 3.918125] FS: 00007f7a01c3d700(0000) GS:ffff880147a00000(0000) knlGS:00000 00000000000 [ 3.957147] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.984541] CR2: 0000000000000000 CR3: 000000013e76d000 CR4: 00000000001407f0 [ 4.018944] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4.052920] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 4.087597] Stack: [ 4.097163] ffff88013f897800 ffff88013c10e000 ffff88013f897800 ffff88013f66e 000 [ 4.133062] ffffffff8130faf2 0000000000000000 0000000000000000 ffff88013f66e 000 [ 4.168660] 0000000000000000 0000000000000000 ffffffff8131003d ffff88013f66e 038 [ 4.204166] Call Trace: [ 4.215854] [<ffffffff8130faf2>] ? scsi_alloc_sdev+0x232/0x2c0 [ 4.244420] [<ffffffff8131003d>] ? scsi_probe_and_add_lun+0x4bd/0xf70 [ 4.275996] [<ffffffff8126612d>] ? kobject_set_name_vargs+0x4d/0x70 [ 4.306901] [<ffffffff812f05d2>] ? dev_set_name+0x42/0x50 [ 4.333344] [<ffffffffa00e9ee0>] ? spi_target_match+0x40/0x94 [scsi_transpor t_spi] [ 4.369953] [<ffffffff812f7d4f>] ? attribute_container_add_device+0x4f/0x130 [ 4.404189] [<ffffffff812f061e>] ? get_device+0xe/0x20 [ 4.429149] [<ffffffff8130f826>] ? scsi_alloc_target+0x276/0x310 [ 4.458618] [<ffffffff81310e1d>] ? __scsi_scan_target+0x8d/0x5c0 [ 4.487944] [<ffffffff812f22af>] ? device_create+0x2f/0x40 [ 4.515371] [<ffffffff81311423>] ? scsi_scan_target+0xd3/0xe0 [ 4.543625] [<ffffffff8131d62f>] ? sas_rphy_add+0x10f/0x170 [ 4.571219] [<ffffffffa022aaa8>] ? adjust_hpsa_scsi_table+0x14d8/0x1d80 [hps a] [ 4.606077] [<ffffffffa022fa5e>] ? hpsa_scan_start+0x13fe/0x1f30 [hpsa] [ 4.638208] [<ffffffff812f7ff0>] ? transport_setup_classdev+0x20/0x20 [ 4.670020] [<ffffffff812f7bb6>] ? attribute_container_device_trigger+0x66/0 xb0 [ 4.705728] [<ffffffff813116bd>] ? do_scsi_scan_host+0x2d/0x80 [ 4.734367] [<ffffffffa022e2ef>] ? hpsa_init_one+0x1d1f/0x2090 [hpsa] [ 4.765549] [<ffffffff81289a90>] ? pci_device_probe+0x60/0xa0 [ 4.794104] [<ffffffff812f46aa>] ? really_probe+0x5a/0x220 [ 4.820975] [<ffffffff812f4931>] ? __driver_attach+0x81/0x90 [ 4.849320] [<ffffffff812f48b0>] ? __device_attach+0x40/0x40 [ 4.877213] [<ffffffff812f29a3>] ? bus_for_each_dev+0x53/0x90 [ 4.905465] [<ffffffff812f3e48>] ? bus_add_driver+0x158/0x250 [ 4.933999] [<ffffffffa023a000>] ? 0xffffffffa0239fff [ 4.958813] [<ffffffff812f4f38>] ? driver_register+0x68/0x150 [ 4.986892] [<ffffffffa023a000>] ? 0xffffffffa0239fff [ 5.011285] [<ffffffffa023a038>] ? hpsa_init+0x38/0x58 [hpsa] [ 5.039143] [<ffffffff810003aa>] ? do_one_initcall+0xea/0x140 [ 5.067531] [<ffffffff81085d8f>] ? load_module+0x1d0f/0x2060 [ 5.095251] [<ffffffff81082c40>] ? store_uevent+0x40/0x40 [ 5.121729] [<ffffffff81086171>] ? SYSC_init_module+0x91/0xc0 [ 5.149695] [<ffffffff814ab7f2>] ? system_call_fastpath+0x16/0x1b [ 5.179073] Code: 05 00 00 48 8d ab 40 02 00 00 48 89 ef e8 3c 6e 28 e1 45 8b 84 24 88 00 00 00 45 85 c0 0f 85 cb 00 00 00 49 8b 94 24 68 01 00 00 <48> 8b 32 8b 93 44 02 00 00 85 d2 7e 38 83 ea 01 48 8d 8b 48 02 [ 5.272545] RIP [<ffffffffa0223f6d>] hpsa_slave_alloc+0x3d/0x1f0 [hpsa] [ 5.305240] RSP <ffff880141f6f720> [ 5.322382] CR2: 0000000000000000 [ 5.338434] ---[ end trace 0cff598f082b2577 ]---
-
Hi, I have an issue with the hpsa.ko.
The disks discovered but not recognized correctly... Var/log/messages says: Read capacity failed.
Oops kernel in the unique_id of the disk.
-
5 hours ago, emkookmer said:
Which model are you running on?
Because on my DL360 G7 i'm getting the following error, when I try to install/format
I've the same issue with a microserver Gen8 and a SAS Controler HPSA
I try the IG-88 extra.lzma whith the june 1.02B
The HPSA.KO is on the extra.lzma.
The disks are discover.
But the disks aren't recognize correctly.. the var/log/message say: Read Capacity failled for each disk.
I have tryed xpenology 5.2 and all work fine.
Could U help me to solve this issue ?
Thanks.
-
I tryed the extra.lzma for 6.1.3@IG-88 i have the same issue :
QuoteSep 16 13:29:01 kernel: [ 3.309536] HP HPSA Driver (v 2.0.2-1)
Sep 16 13:29:01 kernel: [ 3.309625] hpsa 0000:07:00.0: MSIX
Sep 16 13:29:01 kernel: [ 3.309650] hpsa 0000:07:00.0: irq 45 for MSI/MSI-X
Sep 16 13:29:01 kernel: [ 3.309656] hpsa 0000:07:00.0: irq 46 for MSI/MSI-X
Sep 16 13:29:01 kernel: [ 3.309660] hpsa 0000:07:00.0: irq 47 for MSI/MSI-X
Sep 16 13:29:01 kernel: [ 3.309665] hpsa 0000:07:00.0: irq 48 for MSI/MSI-X
Sep 16 13:29:01 kernel: [ 3.309670] hpsa 0000:07:00.0: irq 49 for MSI/MSI-X
Sep 16 13:29:01 kernel: [ 3.309674] hpsa 0000:07:00.0: irq 50 for MSI/MSI-X
Sep 16 13:29:01 kernel: [ 3.309679] hpsa 0000:07:00.0: irq 51 for MSI/MSI-X
Sep 16 13:29:01 kernel: [ 3.309683] hpsa 0000:07:00.0: irq 52 for MSI/MSI-X
Sep 16 13:29:01 kernel: [ 3.329787] hpsa 0000:07:00.0: hpsa0: <0x323a> at IRQ 45 using DAC
Sep 16 13:29:01 kernel: [ 3.350587] scsi0 : hpsa
Sep 16 13:29:01 kernel: [ 3.353454] hpsa 0000:07:00.0: RAID device c0b3t0l0 added.
Sep 16 13:29:01 kernel: [ 3.353459] hpsa 0000:07:00.0: Direct-Access device c0b0t0l0 added.
Sep 16 13:29:01 kernel: [ 3.364461] scsi 0:3:0:0: RAID HP P410 6.64 PQ: 0 ANSI: 5
Sep 16 13:29:01 kernel: [ 3.377043] scsi 0:0:0:0: Direct-Access HP LOGICAL VOLUME 6.64 PQ: 0 ANSI: 5
Sep 16 13:29:01 kernel: [ 3.399978] usb 1-1: new high-speed USB device number 2 using ehci-pci
Sep 16 13:29:01 kernel: [ 3.419514] sd 0:0:0:0: [sda] READ CAPACITY failed
Sep 16 13:29:01 kernel: [ 3.419517] sd 0:0:0:0: [sda]
Sep 16 13:29:01 kernel: [ 3.419519] Result: hostbyte=0x00 driverbyte=0x08
Sep 16 13:29:01 kernel: [ 3.419521] sd 0:0:0:0: [sda]
Sep 16 13:29:01 kernel: [ 3.419522] Sense Key : 0x5 [current]
Sep 16 13:29:01 kernel: [ 3.419526] sd 0:0:0:0: [sda]
Sep 16 13:29:01 kernel: [ 3.419527] ASC=0x20 ASCQ=0x0
Sep 16 13:29:01 kernel: [ 3.450831] sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled
Sep 16 13:29:01 kernel: [ 3.461271] sd 0:0:0:0: [sda] Asking for cache data failed
Sep 16 13:29:01 kernel: [ 3.487400] sd 0:0:0:0: [sda] Assuming drive cache: write through
Sep 16 13:29:01 kernel: [ 3.550267] Got empty serial number. Generate serial number from product.
Sep 16 13:29:01 kernel: [ 3.550597] hub 1-1:1.0: USB hub found
Sep 16 13:29:01 kernel: [ 3.550646] hub 1-1:1.0: 6 ports detected
Sep 16 13:29:01 kernel: [ 3.558001] sd 0:0:0:0: [sda] READ CAPACITY failed
Sep 16 13:29:01 kernel: [ 3.558006] sd 0:0:0:0: [sda]
Sep 16 13:29:01 kernel: [ 3.558008] Result: hostbyte=0x00 driverbyte=0x08
Sep 16 13:29:01 kernel: [ 3.558010] sd 0:0:0:0: [sda]
the disk is discovered but something was wrong : READ CAPACITY FAILED
Someone thinks this is a confict between CISS and HPSA.
But no idea to resolve this issue.
I tryed xpeno 5.2 and it's worked fine.
-
On 09/09/2017 at 1:25 PM, Polanskiman said:
Vous n'avez répondu qu'à la moitié de mes questions.
Vous pouvez essayé de re-compiler le module avec le dernier code source mis à jour par Synology pour 3615xs DSM 6.1.3.
https://sourceforge.net/projects/dsgpl/files/Synology NAS GPL Source/15152branch/bromolow-source/
Bonjour je viens d'essayer le nouveau extra.lzma compiler par @IG-88.
Le drivers HPSA.KO est bien dedans mais j'ai exactement la même erreur que précédemment.
QuoteSep 16 13:29:01 kernel: [ 3.309536] HP HPSA Driver (v 2.0.2-1)
Sep 16 13:29:01 kernel: [ 3.309625] hpsa 0000:07:00.0: MSIX
Sep 16 13:29:01 kernel: [ 3.309650] hpsa 0000:07:00.0: irq 45 for MSI/MSI-X
Sep 16 13:29:01 kernel: [ 3.309656] hpsa 0000:07:00.0: irq 46 for MSI/MSI-X
Sep 16 13:29:01 kernel: [ 3.309660] hpsa 0000:07:00.0: irq 47 for MSI/MSI-X
Sep 16 13:29:01 kernel: [ 3.309665] hpsa 0000:07:00.0: irq 48 for MSI/MSI-X
Sep 16 13:29:01 kernel: [ 3.309670] hpsa 0000:07:00.0: irq 49 for MSI/MSI-X
Sep 16 13:29:01 kernel: [ 3.309674] hpsa 0000:07:00.0: irq 50 for MSI/MSI-X
Sep 16 13:29:01 kernel: [ 3.309679] hpsa 0000:07:00.0: irq 51 for MSI/MSI-X
Sep 16 13:29:01 kernel: [ 3.309683] hpsa 0000:07:00.0: irq 52 for MSI/MSI-X
Sep 16 13:29:01 kernel: [ 3.329787] hpsa 0000:07:00.0: hpsa0: <0x323a> at IRQ 45 using DAC
Sep 16 13:29:01 kernel: [ 3.350587] scsi0 : hpsa
Sep 16 13:29:01 kernel: [ 3.353454] hpsa 0000:07:00.0: RAID device c0b3t0l0 added.
Sep 16 13:29:01 kernel: [ 3.353459] hpsa 0000:07:00.0: Direct-Access device c0b0t0l0 added.
Sep 16 13:29:01 kernel: [ 3.364461] scsi 0:3:0:0: RAID HP P410 6.64 PQ: 0 ANSI: 5
Sep 16 13:29:01 kernel: [ 3.377043] scsi 0:0:0:0: Direct-Access HP LOGICAL VOLUME 6.64 PQ: 0 ANSI: 5
Sep 16 13:29:01 kernel: [ 3.399978] usb 1-1: new high-speed USB device number 2 using ehci-pci
Sep 16 13:29:01 kernel: [ 3.419514] sd 0:0:0:0: [sda] READ CAPACITY failed
Sep 16 13:29:01 kernel: [ 3.419517] sd 0:0:0:0: [sda]
Sep 16 13:29:01 kernel: [ 3.419519] Result: hostbyte=0x00 driverbyte=0x08
Sep 16 13:29:01 kernel: [ 3.419521] sd 0:0:0:0: [sda]
Sep 16 13:29:01 kernel: [ 3.419522] Sense Key : 0x5 [current]
Sep 16 13:29:01 kernel: [ 3.419526] sd 0:0:0:0: [sda]
Sep 16 13:29:01 kernel: [ 3.419527] ASC=0x20 ASCQ=0x0
Sep 16 13:29:01 kernel: [ 3.450831] sd 0:0:0:0: [sda] Test WP failed, assume Write Enabled
Sep 16 13:29:01 kernel: [ 3.461271] sd 0:0:0:0: [sda] Asking for cache data failed
Sep 16 13:29:01 kernel: [ 3.487400] sd 0:0:0:0: [sda] Assuming drive cache: write through
Sep 16 13:29:01 kernel: [ 3.550267] Got empty serial number. Generate serial number from product.
Sep 16 13:29:01 kernel: [ 3.550597] hub 1-1:1.0: USB hub found
Sep 16 13:29:01 kernel: [ 3.550646] hub 1-1:1.0: 6 ports detected
Sep 16 13:29:01 kernel: [ 3.558001] sd 0:0:0:0: [sda] READ CAPACITY failed
Sep 16 13:29:01 kernel: [ 3.558006] sd 0:0:0:0: [sda]
Sep 16 13:29:01 kernel: [ 3.558008] Result: hostbyte=0x00 driverbyte=0x08
Sep 16 13:29:01 kernel: [ 3.558010] sd 0:0:0:0: [sda]
le disque est mal reconnu et donc l'installation du pat est en echec.
-
3 minutes ago, jojeju9428 said:
Pas de souci mais je suis bloqué à l'étape 9 touche M
Je ne vois pas comment intégrer les pilotes du controleur array p410i
Il est bien planqué le driver j'ai cherché un bon moment !
alors il faut aller dans :
Device Drivers --->SCSI device support --->SCSI low-level drivers --->
et la tu as : HP Smart Array SCSI driver il faut alors le sélectionner tu auras un M devant.
il faut ensuite sauvegarder et sortir pour reprendre le tuto au num 10.
Tiens moi courant.
-
Just now, jojeju9428 said:
Bonjour,
Je cherche également a installer sur un ML350 G6
Peux-tu me donner le tuto, car je ne sais pas comment faire pour compiler
Merci
Bonjour,
J'ai suivi ce tuto qui permet de compiler sous win10.
https://xpenology.club/compile-drivers-xpenology-with-windows-10-and-build-in-bash/
pourrais tu me faire un retour de tes tests ?
Merci d'avance.
-
bromolow-gcc493_glibc220_linaro_x86_64-GPL.txz
linux-3.10.x.txz
est ce bien les bons fichiers ?
Cdlt
-
Hi, I would like to user an HP P410 with your last loader. I have compiled the hpsa.ko driver and add it to the extra.lzma.
the disk are discovered but there is an issue the capacity of the disk couldn't be read and so there are not usable.
I try the 5.2 loader and all work fine.Could You help me to solve this problem ?
-
Bonjour,
Je l'ai effectivement compilé moi même en suivant un tuto.
j'utilise le loader 1.02B et c'est effectivement un HP Gen8 avec une carte SAS HP P410 au dernier firmware ( j'avais le meme pb avant flashage)
Cdlt.
-
bonjour,
je cherche depuis un moment a utiliser une carte SAS HP410 avec le loader jun.
j'ai ajouté le driver hpsa.ko
le serveur boot. xpeno me trouve bien mes 4 disques par contre il ne sont pas exploitable....
dans var/log/message j'ai une erreur "Capacity read failed" sur chaque disque.
Je viens de faire le test avec la version 5.2 et tout fonctionne normalement.
avez vous une idée ?
HP Gen10+ et DSM7 (Redpill)
in Compatibilité Hardware & Installation
Posted
Bonjour, est ce que vous avez pu tester ? Merci