jeannotmer
-
Posts
25 -
Joined
-
Last visited
Posts posted by jeannotmer
-
-
Lol i probably found the problem due to translation i didn't find the button in the UI for build line P
"construisez le chargeur" = build the loader😅
-
Hello i start the operation
i'm stuck on the build part
inside the UI TCRP-mshell i don't find any entry for build the loader
so i launch the command
./rploader.sh build ds3622xsp-7.2.1-69057
But the command failed
Unzipping broadwellnk 5.10.55 redpill.ko ... cp: cannot stat '/tmp/rp-broadwellnk-5.10.55-prod.ko : Aucun fichier ou dossier de ce type No extra build option or static specified, using default (static) using static compiled redpill extension removing any old redpill.ko modules looking for redpill for : ds3622xsp_69057 Modules does not contain platorm information for ds3622xsp_69057
Seem it's try to load from this repo https://github.com/PeterSuh-Q3/tcrp-modules/tree/main/all-modules/releases
the information but i dont find this "broadwellnk-5.10.55" version
The pat file is well on /mnt/sbd3/auxfiles/ds3622xsp_69057.pat
@Peter Suh fyi
I'm still investigate is someone have an idea i take
-
Thanks to both of you. As all recommend I will test with a spare disk yes. And have. A look to the new version of the loader with UI ( I m not afraid of command line)
I just have a look to DS3622xs+ real model
I m happy with the price of my gen8 😄
Now I just need time and calm
😝
-
Hello,
i have an hp gen8
HP ProLiant MicroServer Gen8 - Server - Ultra-Micro-Tower - 1-Weg - 1 x Pentium G2020T
With DSM 6.2.2-24922 Update 6 with jun loader 1.03 (DS3615xs) and network card HP NC360T
Yes i'm late on the upgrade process i didn't take time to do it since years ...
I'm trying to prepare my migration and after reading many post and tutorial i'm not sure witch one i have to follow
Do you have any tips or recommendation before i start ?
should i change some BIOS config ?
should i use DSM 7.x with TinyCore RedPill (TCRP) Loader ?
should i upgrade first to DSM 6.3 ?
What is the Syno model i should use
Le 23/05/2022 à 08:47, flyride a dit :pollolake-7.0-41890 apollolake-7.0.1-42218 apollolake-7.1.0-42661 broadwell-7.0.1-42218 broadwell-7.1.0-42661 broadwellnk-7.0.1-42218 broadwellnk-7.1.0-42661 bromolow-7.0.1-42218 bromolow-7.1.0-42661 denverton-7.0.1-42218 denverton-7.1.0-42661 geminilake-7.0.1-42218 geminilake-7.1.0-42661 v1000-7.0.1-42218 v1000-7.1.0-42661
Thanks for your help
i plan to follow this video that follow the flyride tuto but it's not the same CPU as mine gen 8
-
I do this command and it's solved for me this will reboot your dsm
sudo -i && cp /etc/ssl/certs/ca-certificates.crt /etc/ssl/certs/ca-certificates.crt.ORIG && curl -k "https://letsencrypt.org/certs/isrgrootx1.pem" >> /etc/ssl/certs/ca-certificates.crt && reboot
from this post
- 1
- 1
-
Thanks i don't as i say I want to know
"I don't use video station or photo station
Can i ignore this error on SN or should i apply the patch ? for other application ?"
-
For me AS i write before
i need to
i have juste delete , /.xpenoboot folder via ssh and reboot
and after synology assistant find my nas
-
Hello thanks for the works
I'have update my synology (to DSM 6.2.2) and i see the same error on my log
I don't use video station or photo station
Can i ignore this error on SN or should i apply the patch ? for other application ?
-
It OK login works now
i have juste delete , /.xpenoboot folder via ssh and reboot
thanks
-
i find a topic on this problem i will try it
-
hello
i migrate from juns loader 1.02 to 1.03 on HP GEN8 with a new network card (intel)
I add my new intel network card and junloader 1.02b still working on DSM 6.1
and after migrate from dsm 6.1 to 6.2 whith loader 1.03 without driver
but process hang on connection
I add drivers and restart the NAS but i'm still have problem for connexion.
Now i can connect to synology via SSH
but i c'ant log to the UI i have the page but it's hang on loading message
On http://find.synology.com/ my nas is not recognize
On synology assitant apps it's recognize and status ready
On loader it's waiting for synology assistant
"Screen will stop updating shortly please open ...."
...
Thanks for the help
-
thanks and sorry for hijack
HP NC360T is buy
-
Le 03/08/2019 à 23:35, bglf83 a dit :
I was successfully with DS3615xs 1.03b loader.
I did have to delete the old xpenoboot folder as detailed below to resolve my network issues after I migrated from the 3617 to the 3615.
I have an e1000e drive loaded for my NIC. I disabled all my other NICs. To check what driver your NIC is using, log into SSH and run these commands.
(I got this info from another person on the forum)
----------------------------------------------
Open a SSH connection to your NAS, and type:
lspci | grep 0200 (this will list your nic's)
you should see something like:
... Device 8086:xxxx (indicating Intel)
This should be eth0, so type:
ethtool -i eth0
you should see something like:
driver: e1000e (this is a driver supported in 6.2.1)
If not, try using the above :xxxx device id to check if it is supported by the bootloader/DSM version you will try to us------------------------------------------------
Hello i'm also on xpenology on a HP gen 8
DSM 6.1.7-15284 Update 2
DS3615xs
CPU info
- vendor_id : GenuineIntel
- model name : Intel(R) Pentium(R) CPU G2020T @ 2.50GHz
as i understand i can't upgrade until i bought a new network card or my CPU ?
ethtool result
driver: tg3 version: 3.132 firmware-version: 5720-v1.36 NCSI v1.3.7.0
There is another card i can bought ?
because "Gigabit ET2 Quad Port Server AdapterE1G44ET2" is quite expensive and I only need one Gigabit ethernet port or 2 max
Thanks
-
for precision i have an hp gen8
HP ProLiant MicroServer Gen8 - Server - Ultra-Micro-Tower - 1-Weg - 1 x Pentium G2020T
and DSM 6.1.7-15284 Update 2
I also see this video so i can install 6.2 on gen 8 or it's depend wich gen8
-
Thanks how can i do to migrate from a direct xpenology install to a esxi install with a VM, where i install xpenology
without any lost of data or configuration
i see this tuto
-
Le 14/12/2018 à 00:13, AndreyATGB a dit :
CPU appears to be Ivy Bridge, DS918+ loader only works on Haswell and newer.
Thanks
SO the only things i can do it' to wait a new version of loader or it's definitely dead and i need to buy a new baremetal server ?
-
Hello
I have a HP-Compaq ProLiant MicroServer Gen8 Pentium G2020T with dsm 6.1.7-15284-2 JUN'S LOADER v1.02b - DS3615
If i undestand i can update to 6.2 with JUN'S LOADER v1.04b ?
But i need to change model to ds918 ??
How can i check my driver if they are official ?
Thanks
-
OK in fact the french translation is not correct "installation d'un tout nouveau dsm"
in english from syno tuto :
https://www.synology.com/_images/tutorials/migrate_dsm5/diff_find_02.jpg
"installing a newer dsm"
But if you have this clic Yes and after you can choose "migration"
My migration is still in progress but i pass this message
-
Hello thanks for this new tuto
I'm on HP proliant microserver gen 8
i have tried few week ago to migrate from 5.2 to 6.0
but i had an issue
I retest today with this new tuto and loader but i'm still have the same issue
Synoassistant or url find syno find my server but they ask me to install and not to migrate
With this messsage
I have 2 Ethernet port and 2 mac adresse i have try on both and i have the same message !!
Someone can help me ?
-
sur HpProliant 8
Moi je ne passe pas l'install sur http://find.synology.com. je me retrouve avec ce message
"Nous avons détecté que les disques durs de votre DS3615xs actuel a été supprimée à partir d'un précédent DS3615xs et l'installation d'un tout nouveau DSM est demandée avant de continuer."
tu as quel version du proliant ?
ce que je n'ai pas fait
générer un nouveau SN j'utilise celui de mon ancien boot
"activez dans le BIOS le port série si il ne l'est déjà pas"
Je ne vois pas comment le faire et ou dans le bios
Bonjour,
Personne n'aurait une idée d'ou peu provenir ce message et comment faire pour y remédier ?
Merci
-
sur HpProliant 8
Moi je ne passe pas l'install sur http://find.synology.com. je me retrouve avec ce message
"Nous avons détecté que les disques durs de votre DS3615xs actuel a été supprimée à partir d'un précédent DS3615xs et l'installation d'un tout nouveau DSM est demandée avant de continuer."
tu as quel version du proliant ?
ce que je n'ai pas fait
générer un nouveau SN j'utilise celui de mon ancien boot
"activez dans le BIOS le port série si il ne l'est déjà pas"
Je ne vois pas comment le faire et ou dans le bios
-
Bon j e me suis lancer (j'ai pris une clé usb pour booter a la place du CD)
une fois le serveur relancer sur http://find.synology.com. je me retouve avec ce message :
"Nous avons détecté que les disques durs de votre DS3615xs actuel a été supprimée à partir d'un précédent DS3615xs et l'installation d'un tout nouveau DSM est demandée avant de continuer."
Si je continue je suppose que je perd toute mes données ?
J4ai recommencer la manip refait la clé usb
changé SataPortMap=1 par SataPortMap=4
Meme resultat
je boot bien sur le loader de jun mais j'ai le message au dessus il me propose pas de migré
Edit PS:
En attendant j'ai relancé sous dsm 5.2 et tout marche c'est déjà cela
-
Bonjour,
Je n'ai pas trouver sur le site
mais je boot mon xpnology sur le lecteur cd et non pas sur une clé USB
résultat quel est la marche a suivre dans ce cas ?
-
Bonjour,
Petite question, très certainement posé un millier de fois, mais je préfère être vraiment sur de ma migration. Le Tutorial est très précis pour la configuration de la nouvelle clé USB Bootable, cependant, c'est plutôt vague une fois à l'étape 9 (Migration ou nouvelle installation).
Pour le choix d'une migration depuis une version 5.2, y a-t-il des choses importante à prévoir, certain parle d'un passage sur du RAID5, alors que mon volume est en SHR actuellement, pas de risque de formatage ou autre sur la partition de donnée ?
D'autre parle de faire une activation de SHR, mais, si nous fessons une migration, il nous faut déjà installer DSM 6.0.2 non ?
N'ayant pas trouvé de tuto vidéo sur Youtube montrant une migration de DSM 5.2 vers du 6.0.2, je préfères avoir toutes les réponses avant.
J'ai la meme config que toi
ta migration c'est finalement bien passé ?
HP Gen8 Pentium G2020T from 6.2.2 to 7
in DSM 7.x
Posted
Installation is OK still fixing some problem like this one
https://mariushosting.com/synology-how-to-add-usb-support-on-dsm-7/
due to upgrade to DSM 7 and many package that i was using no more compatible
Big thanks for the job here still impressive