ziomekdjpl
-
Posts
14 -
Joined
-
Last visited
Posts posted by ziomekdjpl
-
-
I login via serial, i see my volume1, so the problem is with network.
this is ifconfig:
Quotedocker0 Link encap:Ethernet HWaddr 02:42:19:8A:5F:3B
inet addr:172.17.0.1 Bcast:172.17.255.255 Mask:255.255.0.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)eth0 Link encap:Ethernet HWaddr 00:26:55:DF:7A:24
inet6 addr: fe80::226:55ff:fedf:7a24/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:517 errors:0 dropped:0 overruns:0 frame:0
TX packets:125 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:110423 (107.8 KiB) TX bytes:34518 (33.7 KiB)
Interrupt:16 memory 0xfbfe0000-fc000000eth1 Link encap:Ethernet HWaddr 00:26:55:DF:7A:25
inet6 addr: fe80::226:55ff:fedf:7a25/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:519 errors:0 dropped:0 overruns:0 frame:0
TX packets:127 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:109866 (107.2 KiB) TX bytes:35627 (34.7 KiB)
Interrupt:17 memory 0xfbfa0000-fbfc0000eth50 Link encap:Ethernet HWaddr 66:82:DB:A6:7C:94
inet addr:192.168.192.55 Bcast:192.168.192.255 Mask:255.255.255.0
inet6 addr: fe80::6482:dbff:fea6:7c94/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:287 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:0 (0.0 B) TX bytes:61732 (60.2 KiB)lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:1514 errors:0 dropped:0 overruns:0 frame:0
TX packets:1514 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:284282 (277.6 KiB) TX bytes:284282 (277.6 KiB)ovs_bond0 Link encap:Ethernet HWaddr 00:26:55:DF:7A:24
inet addr:192.168.1.100 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::226:55ff:fedf:7a24/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:546 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:128212 (125.2 KiB)
Its look ok
-
hey, i have gen8, loader 1.03b, its works well a lot of time. 2 days ago its shutdown.
Today i power on it but i cant ping it.
i see on iLO that its boot up good.
I SSH to iLO and turn on virtual serial and i see that:
Quote[ 4.280536] synobios ioctl TCGETS /dev/ttyS1 failed
[ 4.282280] synobios unable to set termios of /dev/ttyS1
[ 4.333351] md: invalid raid superblock magic on sda5
[ 4.359246] md: invalid raid superblock magic on sda6
[ 4.399273] md: invalid raid superblock magic on sdb5
[ 4.418213] md: invalid raid superblock magic on sdb6
[ 4.465834] md: invalid raid superblock magic on sdc5
[ 4.488919] md: invalid raid superblock magic on sdc6
[ 4.512475] md: invalid raid superblock magic on sdc7
[ 4.561532] md: invalid raid superblock magic on sdd5
[ 4.584669] md: invalid raid superblock magic on sdd6
[ 4.601128] md: invalid raid superblock magic on sdd7
[ 26.325082] synobios ioctl TCGETS /dev/ttyS1 failed
[ 26.327320] synobios unable to set termios of /dev/ttyS1
[ 58.203416] synobios write K to /dev/ttyS1 failed
[ 61.134682] synobios write K to /dev/ttyS1 failed
[ 61.225906] synobios write K to /dev/ttyS1 failed
[ 68.077822] synobios write K to /dev/ttyS1 failed
[ 69.074314] synobios write K to /dev/ttyS1 failed
[ 93.280528] synobios write K to /dev/ttyS1 failed
[ 93.694885] synobios write K to /dev/ttyS1 failed
[ 93.848005] synobios write K to /dev/ttyS1 failedRAID damaged? Whats happend? Im afraid of my data is lost
-
Use clean install, dont migrate
-
More info from LOG:
2017-05-05T13:50:47+02:00 serwer synoscgi_SYNO.Core.Package.Installation_1_install[17881]: resource_api.cpp:163 Acquire service-cfg for transmission when 0x0001 (done) 2017-05-05T13:50:49+02:00 serwer [ 1640.349913] init: pkgctl-transmission pre-start process (18079) terminated with status 1 2017-05-05T13:50:49+02:00 serwer synoscgi_SYNO.Core.Package.Control_1_start[17881]: servicecfg_internal_lib.c:187 Failed to start job [pkgctl-transmission][0xD900 privilege.cpp:60] 2017-05-05T13:50:50+02:00 serwer synoscgi_SYNO.Core.Package.Control_1_start[17881]: service_initjob_action.c:27 InitJobStart failed, [0xD900 privilege.cpp:60] 2017-05-05T13:50:50+02:00 serwer synoscgi_SYNO.Core.Package.Control_1_start[17881]: pkgstartstop.cpp:273 Failed to start pkgctl-transmission (err=-1) [0xD900 privilege.cpp:60] 2017-05-05T13:51:56+02:00 serwer transmission-daemon[18819]: Couldn't create "/usr/local/transmission/var//resume": Permission denied (file-posix.c:189) 2017-05-05T13:51:56+02:00 serwer transmission-daemon[18819]: Couldn't create "/usr/local/transmission/var//torrents": Permission denied (file-posix.c:189) 2017-05-05T13:51:56+02:00 serwer transmission-daemon[18819]: Couldn't create "/usr/local/transmission/var//blocklists": Permission denied (file-posix.c:189) 2017-05-05T13:51:56+02:00 serwer transmission-daemon[18819]: UDP Failed to set receive buffer: requested 4194304, got 425984 (tr-udp.c:84) 2017-05-05T13:51:56+02:00 serwer transmission-daemon[18819]: UDP Failed to set send buffer: requested 1048576, got 425984 (tr-udp.c:95) 2017-05-05T13:51:56+02:00 serwer transmission-daemon[18819]: Couldn't save temporary file "/volume1/@appstore/transmission/var/settings.json.tmp.NA5eg0": Permission denied (variant.c:1280) 2017-05-05T13:51:56+02:00 serwer transmission-daemon[18819]: Unable to save pidfile "/usr/local/transmission/var/transmission.pid": Permission denied (daemon.c:548)
Never mind, its work again.
First you need to make transmission account with admin groups. After that you install transmission
-
Look in community
-
Hey
I have problem with transmission. I install it from http://packages.synocommunity.com.
When i try to start it its failed.
In dmesg i have:
process terminated with status 1
I add account transmission with administrator rights, nothing change.
anybody try to start this package?
-
For Microserver Gen8 Baremetal i updated from DS3615xs with DSM 6.1-15047 Update 2 to DSM 6.1.1-15101 but it didnt work. The reason is, that the network card will not get loaded on startup. the system does only have the lo interface an nothing else.
i helped myself by doing a "force install" [NOT Migrate (you will loose your settings)] with DSM 6.1.1-15101 and afterwards updated to Update 1.
Attention: The system hung after the update to "Uodate 1" and i had to powerreset the system. afterwards ot bootet successfully with update 1 installed.
Its work for me too, thanks!
-
On my 6.1.1-15101 i have loop:
dmesg
Jan 1 13:42:55 getty[14056]: console: TCGETS: Input/output error^M Jan 1 13:43:05 getty[14057]: console: TCGETS: Input/output error^M Jan 1 13:43:15 getty[14059]: console: TCGETS: Input/output error^M Jan 1 13:43:25 getty[14060]: console: TCGETS: Input/output error^M Jan 1 13:43:35 getty[14061]: console: TCGETS: Input/output error^M Jan 1 13:43:45 getty[14063]: console: TCGETS: Input/output error^M Jan 1 13:43:55 getty[14064]: console: TCGETS: Input/output error^M Jan 1 13:44:05 getty[14065]: console: TCGETS: Input/output error^M
-
Thanks for that but I think to wait for new loader from jun, after that i could access my data without loosing everything, isnt it?
-
Hey
Can someone tell me how i can downgrade 6.1.1-15101 to DSM 6.0.2-8451 Update 11 ?
Without loosing DATA!
I need to edit /etc.defaults/VERSION and then put my new USB with jun's mod 1.01?
-
Using v1.02a2 loader, just did a force re-install to 6.1.1 from 6.1 then update to Update 1, looks everything goes well.
With v1.02 i cant install update 1, I have error 13
-
Cant migrate to 3617xs with 1.02a2, Error 13
In this situation I need waiting for futher upgrade DSM?
in LOG i see this:
console: TCGETS: Input/output error^M
-
I made a mistake, i migrate from DSM 6.0.2-8451 Update 11 to 6.1.1 with 15101.
Now, my DSM not starting.
I cant downgrade to 15047, any idea? I have HP gen8
DSM dont work any more with DSM 6.0.2-8451 Update 11, im scary..
DS412+ damaged EFI?
in Hardware Modding
Posted
Hey
i have xpenology on micro gen8 and it works very well few years😀
My second NAS is DS412+, for now its down.
From Console i have Shell EFI. I get out flash from motherboard and connect to usb. I can see this flash in OS.
When I reconnect flash to front USB, NAS still dont see it.
So, i made pendrive with PID/VID F400, made Acronis backup flash sector by sector and backup to pendrive.
Now i see this on console:
Boot Options : ------------------------- [ 1 ] - EFI Internal Shell [ 2 ] - EFI USB Device ------------------------- Boot from----> 1 Booting from EFI Internal Shell [Fv(30D9ED01-38D2-418A-90D5-C561750BF80F)/FvFile (C57AD6B7-0515-40A8-9D21-551652854E37)] EFI Shell version 2.30 [1.0] Current running mode 1.1.2 Device mapping table fs0 :Removable HardDisk - Alias hd21d0c blk0 PciRoot(0x0)/Pci(0x1D,0x7)/USB(0x3,0x0)/HD(2,GPT,23616B5A-9DB8-42E9-A 15D-981811D24567,0x10080,0x7D80) fs1 :Removable HardDisk - Alias hd21d0d blk1 PciRoot(0x0)/Pci(0x1D,0x7)/USB(0x3,0x0)/HD(3,GPT,D6659C23-04C0-4661-B 395-DCA7B19AF7DD,0x17E00,0x2F180) blk0 :Removable HardDisk - Alias hd21d0c fs0 PciRoot(0x0)/Pci(0x1D,0x7)/USB(0x3,0x0)/HD(2,GPT,23616B5A-9DB8-42E9-A 15D-981811D24567,0x10080,0x7D80) blk1 :Removable HardDisk - Alias hd21d0d fs1 PciRoot(0x0)/Pci(0x1D,0x7)/USB(0x3,0x0)/HD(3,GPT,D6659C23-04C0-4661-B 395-DCA7B19AF7DD,0x17E00,0x2F180) blk2 :Removable HardDisk - Alias (null) PciRoot(0x0)/Pci(0x1D,0x7)/USB(0x3,0x0)/HD(1,GPT,6B526EF2-6FB2-4D30-B 2D6-83651965BB52,0x22,0x10000) blk3 :Removable BlockDevice - Alias (null) PciRoot(0x0)/Pci(0x1D,0x7)/USB(0x3,0x0) Press ESC in 1 seconds to skip startup.nsh, any other key to continue. startup.nsh> stall 1000 Stall for 1000 uS startup.nsh> fs1: startup.nsh> if exist bios.ROM then startup.nsh> stall 1000 Stall for 1000 uS startup.nsh> SynoBootLoader.efi Verbose mode is turned on Press Ctrl-C to enter the menu Booting SYNOLOGY_2 in 0 seconds... Booting 'SYNOLOGY_2' root (hd0,1) Filesystem type is fat, partition type 0x83 cksum /grub_cksum.syno countdown 3 sec countdown 2 sec countdown 1 sec Open file [/grub_cksum.syno] failed, 1 retry countdown 3 sec countdown 2 sec countdown 1 sec Open file [(nil)] failed, 2 retry countdown 3 sec countdown 2 sec countdown 1 sec Open file [(nil)] failed, 3 retry countdown 3 sec countdown 2 sec countdown 1 sec Open file [(nil)] failed, 4 retry countdown 3 sec countdown 2 sec countdown 1 sec Open file [(nil)] failed, 5 retry countdown 3 sec countdown 2 sec countdown 1 sec Open file [(nil)] failed, 6 retry countdown 3 sec countdown 2 sec countdown 1 sec Open file [(nil)] failed, 7 retry countdown 3 sec countdown 2 sec countdown 1 sec Open file [(nil)] failed, 8 retry countdown 3 sec countdown 2 sec countdown 1 sec Open file [(nil)] failed, 9 retry countdown 3 sec countdown 2 sec countdown 1 sec Open file [(nil)] failed, 10 retryWhat is wrong with flash that i see it on ma laptop but NAS dont see it?
What is wrong with pendrive that NAS cant booting?