freddan83
-
Posts
47 -
Joined
-
Last visited
-
Days Won
1
Posts posted by freddan83
-
-
I ran the latest 6.2 without any custom drivers.
Now im on
DSM 6.2.1-23824 Update 6
But im no longer using my n54l, im using a 3570k now.
-
3 hours ago, fimluyeena said:
Sorry,
I should rephrase the 3rd question. find.synology.com doesn't work, and luckily i found the IP of the NAS via ipconfig (windows cmd line).
Are you running dsm 6.2 by any chance on a HP gen 7 microserver?
I was running it on a n54l until recently.
If find.synology.com doesnt work you can just use the syno assistant or check your router which ip it has assigned to your server.
-
30MB/s is what you should expect with usb2.
Dont understand your third question.. 😃
-
No, info center reports the cpu that the real DS3615xs comes with.
Just cosmetics!
- 1
-
login with an admin user and use
sudo -i
-
26 minutes ago, IceBoosteR said:
Do you have a link for me if it is well documented? Thanks
- 1
-
5 minutes ago, baratta930 said:
Yes, I'm using 1.03b, 3615 and 9220-8i and running fine under 6.2.1 update 4.
You nee to make sure you have a NIC that is intel e1000 based. I bought a cheap HP NC360T ($14 shipped to my door!) as my onboard NIC was realtek based.
Great, thanks =)
- 1
-
Im running 1.03b and 3615.. Is it possible to update to 6.21 and use a lsi 9220-8I pcie card?
-
Hi everyone, and thanks for all your support.
I have a HP Microserver n40l server, and I have followed all the instructions for setting up jun load 1.01. If I plug a VGA cable I see "Booting the kernel". But the problem is I cant find synology nas through find.synology.com or synology assitant. I have tried with a lot of different usb with same result. I think that this HW is supported. I have checked that my mac is fine as VID and PID. Also I have tried running wireshark in a laptop with rj45 directly connected, I cant see any dhcp request.
How I can debug this?
thank you!
are you selecting the amd-boot option?
-
I just created a new boot drive with the latest loader, problem remains the same...
EDIT : got it working!
For anyone running baremetal and experiencing trouble getting an IP with update 9, try the "AMD" boot entry on the boot menu, even if you're not using AMD hardware.
I also did this, worked for me too.. thanks!
Im running bare metal on a N54l
-
I'm using an HP N40L and using the same boot loader but after updating to update 9 the server won't responding anymore. Did an hard reset and im stuck at the following screen. How can i fix this?
early console in decompress_kernel
decompressing Linux... Parsing ELF... Parsing ELF Overlay... done.
Booting the kernel.
After more than an hour waiting there's no progress and synology assistant can't find the NAS anymore even when i've my laptop connected directly to the NAS. The NAS has an static IP even from the router with it's MAC address.
Does somebody have some tips for me?
I dont have mine connected to a screen.. isnt it possible to alt+f2 a terminal, login as your user.. sudo -i
and then ifconfig something up?
-
I have the N54L, have done several reboots without any result.. still not getting an ip =/
-
For me the update is not past I can no longer access the synology.
Same problem here, looks normal in the terminal but it gets no ip from my router.
-
just update from control panel
-
its a symlink
lrwxrwxrwx 1 root root 36 Nov 1 15:13 bin -> /var/packages/MariaDB/target/usr/bin
-
you cant.
but i guess you can go with exsi and run dsm and openelec
-
I solved mine "no-eth-connection problem" only by following these steps:
1. Login as root
2. type su
3. ifconfig eth0
4. type ifconfig eth0 IPofNAS netmask 255.255.255.0 up -> now you can connect via browser on the given ip
5. Login in DSM in Browser
Yes this works, but not after a reboot (for me anyway)
-
Anyone who has solved the no-eth-connection problem?
-
not a brilliant idea but a brilliant advise, never put something important on a raid0..
try this
-
maybe if we dont rape synology services without paying they wont try so hard to keeping us from using it?
-
Network settings - advanced.. Enable multi gateway and enable the other option too and it will work
-
Open file station, right click on the share that download station is downloading to.
Go to permissions, change to local groups and make sure users has read/write
-
Have you tryied a different cable?
-
DSM 6.2.2-24922
in DSM Updates Reporting
Posted
- Outcome of the installation/update: SUCCESSFUL
- DSM version prior update: DSM 6.2.1-23824 update 6
- Loader version and model: Jun v1.03b - DS3615xs
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - MSI Z77A-G43 3570k / extra intel NIC
- Additional comments: none