matlow
-
Posts
5 -
Joined
-
Last visited
Posts posted by matlow
-
-
Hello everyone,
I have a problem with my xpenology. The electricity was turned off in my house and after rebooting my xpenology, I had a message about corrupted storage pool and drive number 2. Then I was able to execute the repair command, but I was getting an disk 2 IDNF error message. Repairing didn't help and actually made it worse because now I can't repair and all files in files manager are in READ MODE. I backed them up to USB disk but I really care about my virtual systems in Virtual Machine Manager. I can't back them up because the system removed all my packages and now they are have status "to repaired", but they can't be repaired because the volume is corrupted. The second disk is now Initialized and work ok because taking it out of the server for a few minutes helped. Can I somehow fix this without deleting the entire Storage pool?
-
23 hours ago, matlow said:
Hi to all,
Motherboard: Asus P8H61-I LX - 1x controller SATA, 4x SATA ports
2x 1TB SATA disks
Tinycore is on bootable usb connected to motherboard
Build Bromolow 6.2.4-25556
Problem with SataPortMap... I have tried a lot of combinations and the effect is the same. All time I have error with not connected disks ( 3 and 4 ) or system installation loop.
script: ./rploader satamap now give me this:
after boot i have error 3 and 4 disk ( i have only 2 hard drives connected )
2) SataPortMap =2
DiskIdxMap=00
NO DISK ERROR but DSM installation loop
3) SataPortMap = 188
DiskIdxMap = 0A0008
NO DISK ERROR but DSM installation loop
4) SataPortMap = 42
DiskIdxMap = 0004
ERROR DISKS
and many combinations don't help because the problems are like mentioned above.
could I ask for support and help?
I tried to do a build for bromolow 7.0.1 with SataPortMap 2 and DiskIdxMap 00 and everything works fine!!!. No disk errors and the system installed successfully. Clearly the problem is with build bromolow 6.2.4-25556 on the same sataport and diskidx after which the system installs in a loop. @pocopico could you check this? Thanks a lot
-
Hi to all,
Motherboard: Asus P8H61-I LX - 1x controller SATA, 4x SATA ports
2x 1TB SATA disks
Tinycore is on bootable usb connected to motherboard
Build Bromolow 6.2.4-25556
Problem with SataPortMap... I have tried a lot of combinations and the effect is the same. All time I have error with not connected disks ( 3 and 4 ) or system installation loop.
script: ./rploader satamap now give me this:
after boot i have error 3 and 4 disk ( i have only 2 hard drives connected )
2) SataPortMap =2
DiskIdxMap=00
NO DISK ERROR but DSM installation loop
3) SataPortMap = 188
DiskIdxMap = 0A0008
NO DISK ERROR but DSM installation loop
4) SataPortMap = 42
DiskIdxMap = 0004
ERROR DISKS
and many combinations don't help because the problems are like mentioned above.
could I ask for support and help?
-
Hello, I have problem. I want upgrade to dsm 6.0 but Synology Assistance don't find my xpenology. I have asrock ion 330 ( amcp7a ion-ht ) and bootloader Jun's official v.1.01. Bootloader is working.
xpenoboot for 5.2 working fine.
Any1 can help me?
Volume1 crashed
in The Noob Lounge
Posted
The problem has been solved,
if any of you have a similar situation then:
1. creating a new bootable flash drive with the same loader does not help
2. creating a bootable flash drive with Tinycore 7.x loader does not help - new system installation loop
3. creating a bootable flash drive to 7.1.1 from Automated RedPill Loader helped.
I upgraded the system from version 6.2.3 to 7.1.1 and in the memory pool there was an option to convert read only to read/write so that I had full access to files, and then the pool repair itself