m3rlinux
-
Posts
31 -
Joined
-
Last visited
Posts posted by m3rlinux
-
-
Did you get this message yet?
-
- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.1.5-15254
- Loader version and model: Jun's Loader v1.02b - DS3615xs
- Installation type: HP Microserver Gen8
- Additional comments: No reboot required
-
- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.1.4 15217 Update 1
- Loader version and model: Jun's Loader v1.02b - DS3617xs
- Installation type: Baremetal (HPE Proliant MicroServer Gen8)
- Additional comments: Requires reboot -
Quello che voleva dire richie e che non si può negare e che una volta messo su funziona tutto che è una bomba. Poi però se ci affidi i tuoi dati ogni volta che aggiorni devi mettere in conto di avere un backup altrimenti potresti perdere tutto!
Inviato dal mio ONEPLUS A5000 utilizzando Tapatalk -
Io ce l'ho da un po e non ho mai aggiornato. Ti consiglio di aggiornare solo in caso di problemi.Scusa se approfitto della tua disponibilità... Per caso c'è qualche aggiornamento da fare al server prima di installarci xpenology? Tipo firmware
Se hai bisogno...
Inviato dal mio ONEPLUS A5000 utilizzando Tapatalk
-
Perfetto! Tanto la configurazione del raid la cambi dinamicamente...Si si grazie , di quelli x ora ne ho 3... Inizialmente lo userei con uno solo x test per inserirci gli altri successivamente
Inviato dal mio ONEPLUS A5000 utilizzando Tapatalk
-
Okkio che te lo danno senza dischi... E se non li hai io ti consiglio di prendere i WD redOttimo, ora non devo far altro che comprarlo [emoji38]
Inviato dal mio ONEPLUS A5000 utilizzando Tapatalk
-
Non ti serve, a meno che tu non voglia avere un nome invece di un IPOttime notizie grazie mille, gentilissimo [emoji4]
Quella del quick connect un po' mi dà da pensare... avendo ip statico quei servizi ddns ecc, non dovrebbe servirmi, giusto?
Inviato dal mio ONEPLUS A5000 utilizzando Tapatalk
-
Nemmeno sembra acceso... É silenziosissimo. É come fosse un synology a tutti gli effetti, l'unica cosa che non puoi utilizzare è il quickconnect. Per raggiungere da fuori casa il NAS. Ma a questo si rimedia facilmente con un dns dinamico (ddns; no-ip...)Grazie mille [emoji4]...
Altre due domande, Una volta installato è come se fosse un vero NAS Synology con tutte le sue funzioni o gli manca qualcosa?
Il microserver, è rumoroso per una camera ?
Inviato dal mio ONEPLUS A5000 utilizzando Tapatalk
-
La parte che ti fa perdere più tempo e la lettera e la comprensione del tuturial. Per il resto dopo che hai ben chiaro cosa ti occorre e cosa fare, l'installazione la fai in 10 minuti e non è una cosa complicatissima.Buonasera,
dopo anni vorrei comprarmi un NAS e dopo varie ricerche mi sono imbattuto nel microserver HP. Ora vi chiedo, è molto complicato installarci Xpenology e configurarlo o meglio andare direttamente con un NAS puro?
Vorrei usarlo come File storage e media player, con possibilità di accesso dall'esterno, magari via smartphone.
Altra domanda, è tanto rumoroso? devo tenerlo in camera mia, almeno i primi periodi.
Tenete presente che dedicarci del tempo non mi darebbe fastidio, basta non doverci mettere dei giorni [emoji3]
Ho preso in considerazione questo HP perché costa poco e ha piu possibilità rispetto ad un nas di pari prezzo, e sopratutto è espandibile.
Grazie mille.
ps. proprio oggi è in offerta su amazon a 200€..
Inviato dal mio ONEPLUS A5000 utilizzando Tapatalk
-
Premesso che io non sono un guru al riguardo, ti lascio il mio punto di vista.
Stabilità: io ho il base del gen8 con xpenology da circa 6 mesi, ho effettuato anche diversi aggiornamenti e adesso ho l'ultima versione di DSM. Al momento non ho riscontrato problemi di stabilità.
Vantaggi di potenza: considera che i qnap base o i synology base hanno 1/4 di potenza HW e il mestiere di NAS lo svolgono più che egregiamente. Xeon e tanta RAM secondo me ti servono solo se vuoi virtualizzare o decodificare video.
Chiavetta: indispensabile c'è il boot loader del sistema
Cache SSD: con un solo disco fai cache in sola lettura. Dovrebbe funzionare ma io personalmente non l'ho testato. Se ci provi, fammi sapere
Inviato dal mio ONEPLUS A5000 utilizzando Tapatalk -
2 hours ago, mig67 said:
Sono ormai 1 anno che non uso più Xpenology e vorrei ritornarci, ho letto in giro svariato How to ma non ho capito quall'è il metodo giusto e soprattutto quale quello aggiornato, mi segnalereste un link? Grazie a tutti
Ciao! Ti consiglio di guardare il primo post (e relativi link presenti) di questo thread:
Io sto utilizzando l'ultimissima versione (DS3615xs - 6.1.3.-15152) su un Microserver HP Gen8.
Al momento mi sto trovando davvero bene.
-
On 15/7/2017 at 9:26 PM, CrazyCreator said:
how do a hard reset? or you mean a reboot from/with iLO Web-GUI?
Yep! I mean reboot from iLO!
-
Baremetal: HP Gen8
Update to 6.1.3.-15152By: Automatic Update
Note: After update I waited I while then I performed an hard reset (reboot).All seems working.
-
Make a backup of your data!!
Then, You need access to virtual serial through the iLo and the last synoboot.img (1.02b)
Try to boot the server with the new image and perform the recovery suggested.
Perform the update and reboot.
Probably you lose network driver, to recovery, you need to access to console by iLo and to copy some files . You can find a tutorial for our server to do this.
Inviato dal mio LG-D855 utilizzando Tapatalk -
1 hour ago, m3rlinux said:
Hi! I am on HP gen8 and it worked nice with "DS3615xs 6.1 Jun's Mod V1.02-alpha"
DSM version is 6.1
Now, I mount synoboot.img (1.02b) with osfmount (as usual) and I change only grub.cfg according to my USB stick and MAC Addresses.
I wrote .img on USB, but now when I try to boot the server It doesn't appear on the network.
I connected through the "virtual serial" and I discovered that no ip address was assigned. I tryed to log in into my diskstation but It returns a Login incorrect!
</>hpiLO-> VSP Virtual Serial Port Active: COM1 Starting virtual serial port. Press 'ESC (' to return to the CLI Session. DiskStation login: my_username Password: my_password Login incorrect
Does anyone any idea to manage this issue?
Many thanks
I managed to solve this silly issue...
I had disabled DHCP on my router and I enabled it on DSM.
The new image need a DHCP to boot correctly, so I re-enabled it on my router and when it boot I did a recovery (proposed by dsm) and a reboot again.
Everything works good now! -
Hi! I am on HP gen8 and it worked nice with "DS3615xs 6.1 Jun's Mod V1.02-alpha"
DSM version is 6.1
Now, I mount synoboot.img (1.02b) with osfmount (as usual) and I change only grub.cfg according to my USB stick and MAC Addresses.
I wrote .img on USB, but now when I try to boot the server It doesn't appear on the network.
I connected through the "virtual serial" and I discovered that no ip address was assigned. I tryed to log in into my diskstation but It returns a Login incorrect!
</>hpiLO-> VSP Virtual Serial Port Active: COM1 Starting virtual serial port. Press 'ESC (' to return to the CLI Session. DiskStation login: my_username Password: my_password Login incorrect
Does anyone any idea to manage this issue?
Many thanks
-
2 hours ago, m3rlinux said:
I have same issue with my HP gen8. I'm newbe, please, can you help me? Many thanks!
I managed to solve
I managed to access to virtual serial console following instructions found in this thread.
So, I had login into my NAS and by "sudo -i" I had root access.After that I did these two commands
cp /lib/modules/update/libphy.ko /lib/modules/ cp /lib/modules/update/tg3.ko /lib/modules/
finally I rebooted DSM and Networ starting working again.
I apologyze my poor english. -
On 15/6/2017 at 4:21 PM, Arcao said:
Damn, I can't edit my previous post.
Anyway, after copy kernel modules from extra.lzma to /lib/modules, it works again! So it looks like missing kernel modules detection is not present in a bootloader.
I have same issue with my HP gen8. I'm newbe, please, can you help me? Many thanks!
-
Create a custom DDNS, configure it in DSM and then configure your firewall(s) accordingly. That's all that needs to be done and you will be able to access your box from outside your home network.
For using DDNS you still need white dynamic IP
If you don't have white dynamic IP and can't configure ISP's hardware (expected) - vpn/tunnel is single way to access [emoji38]
What is white dynamic ip? Even google doesn't know anything about it.
You need only an account to one of the ddns service available for free and than you need to configure it in your dsm. That's all.
Inviato dal mio LG-D855 utilizzando Tapatalk
-
Ddns service don't know if your ip is static or dynamic, so it works like a charm!
Inviato dal mio LG-D855 utilizzando Tapatalk
-
For Microserver Gen8 Baremetal i updated from DS3615xs with DSM 6.1-15047 Update 2 to DSM 6.1.1-15101 but it didnt work. The reason is, that the network card will not get loaded on startup. the system does only have the lo interface an nothing else.
i helped myself by doing a "force install" [NOT Migrate (you will loose your settings)] with DSM 6.1.1-15101 and afterwards updated to Update 1.
Attention: The system hung after the update to "Uodate 1" and i had to powerreset the system. afterwards ot bootet successfully with update 1 installed.
It work for me too! I update to "Update 2" without issue. All seems to work for now, (even package installation)
-
Hi.
Anyone tried to update to 6.1.1-15101-2 version?
Updated Gen8 baremetal to 6.1.1-15101 Update 2. Reboot required. Everything seems okay. All Packages and services are working.
Is it possibile to update from 6.0.2? Can you tell how? Thanks.
Inviato dal mio LG-D855 utilizzando Tapatalk
-
Please, does someone add network drivers for hp 332i interface (gen8) on 1.02a loaders? Many thanks.
Inviato dal mio LG-D855 utilizzando Tapatalk
Upgraded to 6.2, Can't Login to Web UI & Network Changed
in Answered Questions
Posted
Apparmor error