Jump to content
XPEnology Community

tamamma

Member
 View Profile  See their activity

  • Posts

    25

  • Joined

  • Last visited

 Content Type 

Posts posted by tamamma

    Gigabyte J3455N-D3H with Jun's Loader v1.04b DS918+

    in DSM 6.x

    Posted

    On 9/3/2019 at 9:51 PM, Hostilian said:

    Worked fine for my J3455-ITX - though I made my own Extra.lzma..

    Powerdown and reboots are fixed too, good job!

     

    Should say that I needed to leave it for an awfully long time before getting a ping (and a couple of reboots)..

    But all was good eventually..

    Attached my custom.lzma

    extra.lzma 1.26 MB · 12 downloads

    Hi, thank you for sharing, one question, the internal lan is seen at 1000Mbps or 100Mbps?

    DSM 6.2 Loader

    in Loaders

    Posted

    On 10/30/2018 at 9:31 PM, ideasman69 said:

    hmm.. heres something for you guys...

     

    i have 3 asrock j3455 boards and have tested 1.04b on two of them:

     

    J3455-ITX: can't get /dev/dri to appear

    J3455B-ITX: works perfectly

    Hi I have J3455-ITX and for make some tests I've used a new usb drive and a small hdd unplugging my actual hard drives that are on DSM 6.1 with older bootloader.

    How can i check if I have /dev/dri ? SSH, TELNET?

    DS3615xs to DS918+ will loose data?

    in DSM 6.x

    Posted

    Hi I'm on Asrock J3455-ITX with bootloader 1.02b and DSM 6.0.2, I would go on DS918+ with 1.04b but i would know if I'll loose all data on my hdd(I've two raid volumes).

    I've read that DSM create a partition on all disks and then when installing when it says "all data will be erased" it refers to DSM partition and not data, is it right?

     

    Some issues with J3455-ITX

    in DSM 6.x

    Posted

    On 8/16/2019 at 1:49 PM, T-REX-XP said:

    Guys, this problem has been solved via modified extra.lzma. please find the solution via forum search. 

     

    P.S: Shutdown via hardware button should work after installing poweroff package from this forum. 

    Tnx I'm gonna search, i found something just with J4205 at the moment

    DSM 6.1.x Loader

    in Loaders

    Posted

    On 23/2/2018 at 12:04 PM, George said:

     

    Just curious... why change from DS915 -> DS3615xs,

     

    G

    I would do the opposite DS3615xs to DS915 due to hardware that i have.

    It would be nice have the DS918+ loader that could support hardware acceleration for plex and Hardware Encryption Engine (AES-NI) of my Intel Celeron J3455

    DSM 6.1.x Loader

    in Loaders

    Posted

    Hi there, I've setted up a DS3615xs with DSM 6.0.2-8451 with 1.0.1 Loader

    I would like to change to DS915 with 1.0.2b loader what have i to do?

    Is there any way to do this change without losing data?

    Asrock Q1900-ITX/Q1900DC-ITX

    in DSM 5.2 and earlier (Legacy)

    Posted

    I'm going to make new NAS and i'm choosing the Mainboard:

    Asrock J3455-ITX for 97Eur

    Asrock Q1900-ITX for 89Eur

     

    Wich do you suggest with compatibility and performance?

    I'm going to have 2 wd RED 3TB for Photo Safe Backup and one more old 250GB for movies ecc to use with plex.

    It looks from the forum that the j3455 works without supporting cpu burst so at 1.5Ghz isn't it?

    I see that DS416play have N3060 and sinology says "Dual Core 1.6 burst up to 2.48 GHz" so looks that this model supports CPU Burst. It will be interestig knows if is possible to port its DSM too, for using these new Asrock MB.

     

    Just got a ASRock J3455-ITX from Newegg for 129:

     

    https://www.newegg.ca/Product/Product.a ... -_-text-_-

     

    I'll update you guys on the build and how it's working.

     

    I've the Q1900DC-ITX ... just curious whether the J3455 has a reasonable or negligible benefit over the J1900.

     

    hmmm...looking at Intel page, I would say negligible. I wouldnt upgrade from J1900

     

    I just got one for myself because my 212j was so slow on 6.0 that i dont even turn it on. It takes at least 10 minutes to start it.

     

    CPU

    one CPU runs at 1.5 and another at 2.0

     

    RAM and Video

    The only difference I see is in RAM and Video Card (from what I understand video card is not used in transcoding...i'm not sure).

     

    You can install 1866mhz ram that can help with speed.

     

    SATA2 Ports

    Also Q1900DC-ITX has 2xSATA3 and 2xSATA2 ports where J3455 has 4xSATA3 ports. I dont think you will saturate those SATA2 speeds, but who knows if you want to add SSD drives, that could be an issue.

     

    Asrock J4205

     

    i dont think i would go for J4205. Its much more expensive and the only difference is baseclock and a little bit better video card.

    Tutorial: Install/Migrate DSM 5.2 to 6.0.2 (Jun's loader)

    in Tutorials and Guides

    Posted

    Wich Intel CPU are supported in all their features?

    J4205-ITX Intel Apollo Lake

    J3455-ITX Intel Apollo Lake

    J3710-ITX Intel Braswell

    J3160-ITX Intel Braswell

    I would like to know if they're supported with all cores and CPU Burst because, in the forum there are misunderstanding about these things.

    Synology new models like DS916+ nas are on Intel N3710 and supports Transcoding with PLEX with AVC, HEVC and AES-NI hardware encryption.

    Would be nice use these features for me

    DSM Loader - Confirmed working Hardware

    in Archives

    Posted

    What about Cores? How many cores are used? Does support PLEX transcoding?

    Tnx

     

    MB: ASRock N3700

    RAM: Kingston ValueRAM DDR3L-1600 SO-DIMM CL11 Single 4GB

    BOOT USB: SanDisk Ultra Fit 16GB

    HDD: 4xWD Red WD60EFRX (SHR)

    Jun's Baremetal V 1.01 + DSM 6.0.2-8451 Update 2

     

    Issues:

     

    CPU Frequeny locked to 1.6 GHz

    Thermal-Status always 40°C

    (I guess right I/O driver is missing)

    Dual boot with Windows 7

    in Archives

    Posted

    This is an interesting solution, to have for example DSM and since it does not support hardware acecleration(tell me if i'm wrong), install an Operative System that supports it with PLEX or XBMC, on another HDD. Suggestions?

    Compatibilità scheda madre ASRock

    in ITALIAN

    Posted

    Salve a tutti, avevo gia postato nel gruppo internazionale ma non ho ricevuto risposta, vorrei fare un Nas con 4hdd ed avrei scelto questa scheda madre, ma prima di acquistarla vorrei sapere se è supportata o c'è qualcosa che non funziona con xpenology:

    ASRock J3455 oppure la J4205 che mi pare sia uguale ma abbia solo processore superiore.

    Vorrei installare direttamente DSM 6, che ne dite?

    Grazie in anticipo a tutti.

    DSM 6: How do I make the PC speaker work?

    in General Questions

    Posted

    Hi, i would buy your same ASRock MB J3455, is working in all its function with dms6?

     

    Hi guys,

    much to my surprise the search function returned virtually no results for keywords like "speaker" or "beep".

    I would like to either use the built-in "Beep Control" functionality in the task scheduler or any other command line utility (like http://www.johnath.com/beep/) to make the PC speaker beep e.g. on system shutdown or disk failure.

    The "Beep Control" feature doesn't work at all, no beep to be heard at the scheduled time. I then grabbed the beep binary (x86_64) from the debian package repository but it didn't work either (without any error message though).

     

    I am running a bare metal installation of DSM 6 on an ASRock J3455.

     

    Do I need a driver? Or do you have any other hints?

    Thanks!

    Working Mainboard suggestions

    in General Questions

    Posted

    Hi there, i would buy an all in one fanless MB and the newer asrock are these:

     

    J4205-ITX Intel Apollo Lake

    J3455-ITX Intel Apollo Lake

    J3710-ITX Intel Braswell

    J3160-ITX Intel Braswell

     

    i would buy the J3455-ITX that supports HEVC (H.265) 10b, is this supported from xpenology in all features?

    Cambio MAC e Seriale dopo installazione DSM

    in ITALIAN

    Posted

    Buongiorno a tutti, ho provato ad aprire la guida per il cambio Mac e Seriale ma le immagini sono saltate.

    C'è qualcuno che ce l'ha completa?

     

    Sono riuscito a cambiare il seriale nel file di configurazione della pennetta usb avviabile, ma per il mac address come devo fare?

    Premetto che non uso macchina virtuale ma devo farlo su una scheda fisica.

    Grazie in anticipo a tutti

×
×
  • Create New...