brauner
-
Posts
19 -
Joined
-
Last visited
Posts posted by brauner
-
-
54 minutes ago, WiteWulf said:
First post on the first page of this thread: https://github.com/RedPill-TTG/redpill-lkm
Well - to complicated to me.
There is no iso / img / vmdk file?
-
Where I can download the bootloader for ESXi?
-
On 8/23/2019 at 3:32 AM, rockytoptim said:
This is stupid question. I got the Active backup activated. But I can't get it to connect to my esxi server. I open active backup and go to virtual machine, add, then enter the following.
server address: 192.168.1.10 This is the address i use to access the gui in chrome.
web services port:443
data transferport: 902
account: admin
password: password
I get error "Fail to connect to the host {192.168.1.10]. Please check the server address, acountt settings and your network settings.
I disable synology firewall just to make sure synology wasn't blocking something.
ESXI has firewall rules for 443 & 902.
Any help is appreciated
You will need to start SSH and ESXi-Shell in the ESXi host (configuration tab), start the deamon and set the option to "start and stop with the host"
-
I would also like to know how to use adblock to block the activation .
tried "AdBlock" but no results
-
thank you
can you please tell me, what version is the beta version?
-Roei
-
Hi
I used the XPEnology New Serial Generator (https://xpenogen.github.io/serial_generator/index.html) and changed the SN.
My env. is ESXi 6.0 and DSM 6.2 with 1.03b loader
I still have an error, should I change the MAC too?
-Roei
-
Does anybody manage to run The New Active Backup suite?
It requries activation, that fails (error 404) on 6.1.7
-Roei
-
I have DSM 6.02 running under ESXi 6.0,never tried to upgrade to 6.1.x, after I saw that it become a brick (I even tried my self, I installed a test 6.0.2 and tried to upgrade).
Now, after 1.0b released, is there a path to upgrade 6.02 to 6.12 on ESXi?
-Roei
-
Hi there
I also tried to upgrade 6.0.2 to 6.1 on ESXi without sucess.
As far as I know, it is impossible right now.
-brauner
I had installed it with 1.02a2 and DS3617 on ESXi 6.5 and it works fine. It runs longer than 48h without any issue. Right know I switch it of because it was only a test.I use the pure syno img without any changes of serial or MAC.
Hi since you have the same environment setup like me (esxi 6.5) and tried with the latest loader too.
May I ask you if you are able to migrate from 6.0.2 to 6.1?
I tried with all 1.02 loaders now and after migration the VM is not visible anymore on the network.
What I did is the following:
- Installed xpenology 6.0.2 fresh on test environment, gave it the synoboot.img by adding the vmdk drive (which essentially is a link to the image file) and one additional drive all on scsi
- edit grub file in image to have the mac1 address correct, nothing else
Then I shut the vm down. Replaced the vmdk and image file with 6.1 loader 1.02a2. Edited grub file to match same mac1.
Turned the VM back on. Got to the migration screen.
Did migrate from ds3615 to ds3617 with keeping the data option.
All went through without error.
Then the assistant reboots and no xpenology anymore on the network.
Synology assistant tool also does not find it anymore.
I wonder if anybody made a successful migration on esxi, yet...
Gesendet von meinem ONE A2003 mit Tapatalk
-
OK, I got the ISO, how do I create a DSM under ESXi using this ISO?
-
Hello
can someone please help with Upgrading from 5.2 to 6 on ESXi environment.
my current (5.2) boot loader is ISO
-Roei
-
Hello,
I have an existing DSM 5.2-5967 running under ESXi, configured as following:
CDROM (boot) - XPEnoboot 5.2-5967.1 (ISO) # this is the boot image
SSD Disk 0 - datastore1 # this is the disk that contain the ESXi datastore
>>>datastore1 > Virtualdisk (20gb)- DSM 5.2-5967 installation # Synology DSM OS is installed in the ESXi datastore
SATA Disk 1+2 (RDM) > Volume1 (RAID1) # these 2 physical disks attached as RDM, connected to the Synology DSM, and configured as RAID1 - Volume1
now, I wish to take this configuration and migrate to 6.02 without loosing any data / settings.
any idea?
-Roei
-
Hello
I managed to create a DSM6 under ESXi6 (using the OVF), but I am unable to add a drive for the volume.
I use the free ESXi hypervisor with the free client.
any tips?
-Roei
-
Hello,
Please advice how to migrate from PC based XPEnology to VM based XPEnology under ESXi.
My current setup is:
Simple PC
Disk #1 (compact flash disk - IDE adapter) > boot image
Disk #2+#3 (2 Tera each) > DSM and 1 volume (Synology Hybrid RAID)
The setup I wish to create:
Simple PC
>ESXi
>>VM Guest
>>> virtual disk #1 - boot image
>>> disk #2 + #3 - connected to guest as RDM (raw device map)
I will set the ESXi hypervison and guest, and I will create and modify the virtual disk for the image boot.
The only thing that I need is a best practice, how to take the 2 HD that were connected to the PC-XPEnology and make them work with the VM XPEnology, without loosing data and settings
Thank you
-Roei
-
Why Converting XPEnoboot IMG to VMDK?
Use the ISO file:
1. download the ISO file and put it in the datastore
2. attach the ISO to the CD/DVD drive
3. tick "connect at power on"
4. verify that the v.machine boot from CD/DVD first
With this simple procedure, you can skip panja's steps 2 and 3
-
I use similar configuration (but 2 CF cards)
I use CF-IDE adapter with 2 slots (http://www.ebay.com/itm/Dual-Compact-Fl ... 230ee448ed)
In the first slot, 128 MB CF card for the boot
In the second slot, 8 GB CF card for the DSM
-Roei
-
Thank you
Do you have any instruction how to add the r8169.ko to the modules directory.
I am not god in linux.
My DSM installed on PC (with USB loader)
I manage to copy the file to the usb stick (using the DSM gui), then went to the console and tried to copy from /volumeUSB2/usbshare/ to /lib/modules/, but got permission denied error.
Update:
managed to copy the .ko file to modules directory (using winscp). whats next?
Update 2:
OK, got it, install it and its working
-Roei
-
Please add driver for Realtek 8110SC (onboard LAN in gigabyte GA-G41M-ES2H)
Anyone manage to use it?
-Roei
RedPill - the new loader for 6.2.4 - Discussion
in Developer Discussion Room
Posted
Forgot to takes your pills today?