henningb
-
Posts
3 -
Joined
-
Last visited
Posts posted by henningb
-
-
Thanks, tried the command, but eth3 still does not appear in ifconfig.
log after command:
Sep 18 11:52:39 NAS3 kernel: [ 136.337374] ixgbe: allow_unsupported_sfp Enabled
Sep 18 11:52:39 NAS3 kernel: [ 136.434260] ixgbe 0000:08:00.0: failed to load because an unsupported SFP+ or QSFP module type was detected.
Sep 18 11:52:39 NAS3 kernel: [ 136.434265] ixgbe 0000:08:00.0: Reload the driver after installing a supported module.
Sep 18 11:52:39 NAS3 kernel: [ 136.434464] ixgbe: allow_unsupported_sfp Enabled
Sep 18 11:52:39 NAS3 kernel: [ 136.518312] ixgbe 0000:08:00.1: irq 68 for MSI/MSI-X
Sep 18 11:52:39 NAS3 kernel: [ 136.518319] ixgbe 0000:08:00.1: irq 69 for MSI/MSI-X
Sep 18 11:52:39 NAS3 kernel: [ 136.518325] ixgbe 0000:08:00.1: irq 70 for MSI/MSI-X
Sep 18 11:52:39 NAS3 kernel: [ 136.518331] ixgbe 0000:08:00.1: irq 71 for MSI/MSI-X
Sep 18 11:52:39 NAS3 kernel: [ 136.518337] ixgbe 0000:08:00.1: irq 72 for MSI/MSI-X
Sep 18 11:52:39 NAS3 kernel: [ 136.519256] ixgbe 0000:08:00.1: PCI Express bandwidth of 16GT/s available
Sep 18 11:52:39 NAS3 kernel: [ 136.519259] ixgbe 0000:08:00.1: (Speed:2.5GT/s, Width: x8, Encoding Loss:20%)
Sep 18 11:52:39 NAS3 kernel: [ 136.519333] ixgbe 0000:08:00.1 eth2: MAC: 1, PHY: 10, PBA No: E37002-011
Sep 18 11:52:39 NAS3 kernel: [ 136.519336] ixgbe 0000:08:00.1: 00:1b:21:d9:29:7e
Sep 18 11:52:39 NAS3 kernel: [ 136.519339] ixgbe 0000:08:00.1 eth2: Enabled Features: RxQ: 4 TxQ: 4
Sep 18 11:52:39 NAS3 kernel: [ 136.519342] ixgbe 0000:08:00.1 eth2: Intel® 10 Gigabit Network Connection
ifconfig:
NAS3> ifconfig
eth0 Link encap:Ethernet HWaddr 00:15:17:E1:F3:C0
inet addr:10.0.40.17 Bcast:10.0.40.255 Mask:255.255.255.0
inet6 addr: fe80::215:17ff:fee1:f3c0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:213997 errors:0 dropped:0 overruns:0 frame:0
TX packets:140469 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:275330815 (262.5 MiB) TX bytes:11032083 (10.5 MiB)
Interrupt:18 Memory:b8820000-b8840000
eth1 Link encap:Ethernet HWaddr 00:15:17:E1:F3:C1
inet addr:10.0.40.18 Bcast:10.0.255.255 Mask:255.255.0.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:19 Memory:b8800000-b8820000
eth2 Link encap:Ethernet HWaddr 00:1B:21:D9:29:7E
inet addr:10.0.80.3 Bcast:10.0.80.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:934 errors:0 dropped:0 overruns:0 frame:0
TX packets:934 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:127579 (124.5 KiB) TX bytes:127579 (124.5 KiB)
Could I add the command in syslinux.cfg in xenoboot ?
btw I'm using DSM 5.2-5967
-
I have an issue with configure the ixgbe driver to allow support of all sfp-modules. I have tried added the following line in \etc.default\modules.conf module_ixgbe_args="allow_unsupported_sfp=1,1"
then restarted server, but still does not work. the kernel log states:
Sep 17 22:19:02 NAS3 kernel: [ 3.173257] ixgbe 0000:08:00.0: failed to load because an unsupported SFP+ or QSFP module type was detected.
Sep 17 22:19:02 NAS3 kernel: [ 3.173260] ixgbe 0000:08:00.0: Reload the driver after installing a supported module.
and the ethernet port does not appear in ifconfig. only the port with empty sfp-slot.
google states I could use the modprobe to tweak the drivers, but I have not got this to work:
NAS3> modprobe -r ixgbe
modprobe: chdir(3.10.35): No such file or directory
Please guide me how to resolve this issue (without buying genuine Intel SFP-modules)
Add allow_unsupported_sfp=1,1 on intel x520-DA2
in Archives
Posted
I don't know, it does not disconnect putty, but ping drops two packets.
I'm logged in as root.
log:
NAS3> /etc/rc.network restart
/etc/rc.network: line 4: can't create /etc/dhcpd/dhcpd.info: nonexistent directory
rm: can't remove '/etc/dhcpd/dhcpd.conf.leases': No such file or directory
rm: can't remove '/etc/dhcpd/dhcpd-leases.log': No such file or directory
network-interface stop/waiting
stop: Unknown instance: eth0
network-interface stop/waiting
stop: Unknown instance: eth1
network-interface stop/waiting
stop: Unknown instance: eth2
stop: Unknown instance: eth3
stop: Unknown instance: eth3
stop: Unknown instance: eth4
stop: Unknown instance: eth4
stop: Unknown instance: eth5
stop: Unknown instance: eth5
stop: Unknown instance: eth6
stop: Unknown instance: eth6
stop: Unknown instance: eth7
stop: Unknown instance: eth7
network-interface stop/waiting
stop: Unknown instance: lo
stop: Unknown instance: tun
stop: Unknown instance: tun
ifconfig: SIOCSIFADDR: No such device
ifconfig: SIOCSIFADDR: No such device
ifconfig: SIOCSIFADDR: No such device
ifconfig: SIOCSIFADDR: No such device
ifconfig: SIOCSIFADDR: No such device
ifconfig: SIOCSIFADDR: No such device
:: Unloading module llc ... [FAILED]
Del default router 10.0.40.1
RTNETLINK answers: No such process
eth0 Link encap:Ethernet HWaddr 00:15:17:E1:F3:C0
inet addr:10.0.40.17 Bcast:10.0.40.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:55717928 errors:0 dropped:0 overruns:0 frame:0
TX packets:35615027 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:73683601561 (68.6 GiB) TX bytes:2523723855 (2.3 GiB)
Interrupt:18 Memory:b8820000-b8840000
eth1 Link encap:Ethernet HWaddr 00:15:17:E1:F3:C1
inet addr:10.0.40.18 Bcast:10.0.255.255 Mask:255.255.0.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:19 Memory:b8800000-b8820000
eth2 Link encap:Ethernet HWaddr 00:1B:21:D9:29:7E
inet addr:10.0.80.3 Bcast:10.0.80.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:165364 errors:0 dropped:0 overruns:0 frame:0
TX packets:165364 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:23497690 (22.4 MiB) TX bytes:23497690 (22.4 MiB)
NAS3> Add default router 10.0.40.1
RTNETLINK answers: File exists
NAS3>