Jump to content
XPEnology Community

neox

Member
 View Profile  See their activity

  • Posts

    12

  • Joined

  • Last visited

 Content Type 

Posts posted by neox

    Guide: Change serial number and MAC address

    in Legacy (Outdated) Tutorials

    Posted

    Hello

     

    Sorry to have a noob question, i am under Proxmox and when i am connected to the Syno via winscp,

    and i dont have any /volumeUSB1/usbshare

    So i don't know where i can find vender file.

     

    If someone can help me, it would be glad.

     

    Thx

     

    Batgod

     

    Sorry but I never ever use Proxmox. I think volume name just as same or maybe named with different suffix number (eg. /volumeUSB2/ or /volumeUSB3/...)

     

    Well, if you use proxmox, you probably don't mount the img as a usbkey but rather as an IDE drive and get your data drive as SATA drive.

    I'll try to check this tomorrow as I also run proxmox kvm for testing xpenology.

    XPEnology DS3612xs DSM 4.2 build 3211++ sur Proxmox/KVM

    in Archives

    Posted

    Ceci est la traduction de mon post fait en anglais hier ( http://xpenology.com/forum/viewtopic.php?f=2&t=1698 )

     

    ------

    Bonjour,

     

    juste pour confirmé l'installation sans souci du XPEnology DS3612xs DSM 4.2 build 3211++ (repack v1.2) sur un Proxmox v3 en utilisant la virtualisation KVM.

     

    Je me suis inspiré de la configuration pour un virtualbox que j'ai adapté ou c'etait necessaire.

     

    1°) creer la machine KVM avec :

    - un disque IDE-0, taille 33MB (mettre 0.032 dans la case du proxmox)

    - autant de disque SATA que vous voulez et qui seront utilisés pour les DATA

     

    2°) convertir le fichier synoboot...img fournit dans le repack v1.2 dans le format de votre disque IDE-0

    en utilisant la ligne de commande de votre proxmox

     

    sur ma machine (ou ma VM a l'ID 106) cela donne 

    qemu-img convert -f raw -O qcow2 synoboot-trantor-4.2-3211-v1.2.img vm-106-disk-1.qcow2

     

    3°) demarrer la machine virtuelle

     

    4°) utiliser l'assitant synology pour detecter votre VM et installer le .pat fournit.

     

    5°) pendant l'installation, la VM doit rebooter, mais l'installeur a efface le disque IDE-0,

    il suffit de stopper la VM, refaire l'etape 2, relancer la VM

     

    6°) Voila, ca boot sur votre DSM4.2 KVM

     

    Enjoy

     

    20131122 : Edit : les disques data doivent etre >4Go sinon l'installeur se plante lors du formatage de la partition systeme

    Big Installation Problem!

    in Archives

    Posted

    [...]

    Is it be fast enough for XPE? Will XPE work on this configuration?

    [...]

     

    should be enough, I run it on virtual machine with one core 1.7Ghz, 512MB RAM, 4GB Hard drive for OS, multiple virtualdisk for data

     

    [...]

    Is it possible to lower the power consumption with XPE? At the moment it need about 40w in IDLE, because there are power saving options on OMV.

    [...]

     

    even if I did not look at specific option, it is intend to be a NAS environnement running on low power hardware

    so it must be low power even on real machine.

     

    [...]

    Is it possible to install XPE on the 160gb system drive separately from my data on the two Samsungs hdd to prevent my data on coming updates?

     

    I would say yes, just dont create the SHR while you install.

    then on first login, go create a custom volume and select the Samsungs hdd for data disk

    Guide: Change serial number and MAC address

    in Legacy (Outdated) Tutorials

    Posted

    ver2.1.xlsb doesn't work for me

    looks like it is write protected thus I can't modify the MAC address cell's :sad:

     

    btw I found this simple trick.

     

    6 packs are the MAC address, 7th pack is the checksum

    but checksum is pretty simple

    it looks like it is a simple sum of bits.

     

    in my case, I add 1 to the last pack of MAC Address, then add 1 to the checksum

     

    and as pictures show you can add 1 wherever you want inside the MAC.

    ex :

    first is : 00:22:32:08:D6:3C, checksum : 6e

    second is 00:24:32:08:D6:3C, checksum : 71 (6E +2)

     

    I have a simple Serial like B3J4N00310

    in the hexedit it appears as B3J4N003105

     

    I juste update my serial by 1 makes : B3J5N00311

    and change checksum to 6

     

    works like a charm

    Install DS3612xs DSM4.2 build 3211++ on Proxmox(KVM)

    in Archives

    Posted

    Hi,

     

    just to confirm I was able to install XPEnology DS3612xs DSM 4.2 build 3211++ (repack v1.2) on my proxmox v3 server using KVM virtualisation.

     

    I just followed the virtualbox howto and adapt where need.

     

    1°) create a KVM machine with :

    - IDE harddrive, size 33MB (set 0.032 in the proxmox menu)

    - any SATA drive the size you want but more thant 4GB that would be used as data

     

    2°)according to the disk format you setup in step1, convert the synoboot...img into vm-xxx-disk-1.qcow2 using this command line in the proxmox shell

    on my machine this gives me (my VM id is 106):

    qemu-img convert -f raw -O qcow2 synoboot-trantor-4.2-3211-v1.2.img vm-106-disk-1.qcow2

     

    3°) boot this machine

     

    4°) launch the synology assistant and install the pat file provided

     

    5°) the first reboot failed as installer reformat the IDE0 drive,

    simple workaround : just redo the step2 to recreate the IDE0 drive

     

    6°) finally boot into your brand new DSM4.2 KVM.

     

    Enjoy

     

    20131122 : Edit : if data drive are 4GB the installer fails while formating system partition, I directly upgrade to 8GB and installer works fine

×
×
  • Create New...