neox

I guess, just create a new drive to add to your xpenology and expand from DSM interface. I mean xpenology is RS3612 clone, so you may be able to manage up to 16 drives, if vmware stop you at 2TB per drive, it would make a whole 32TB...

Sorry but I never ever use Proxmox. I think volume name just as same or maybe named with different suffix number (eg. /volumeUSB2/ or /volumeUSB3/...) Well, if you use proxmox, you probably don't mount the img as a usbkey but rather as an IDE drive and get your data drive as SATA drive. I'll try to check this tomorrow as I also run proxmox kvm for testing xpenology.

to be able to have 2 xpenology on the same network, to test HA for example

il faut configurer le inbound avec le motif "s" pour que tous les appels entrants soit router vers ton "telephone SIP"

Well, new DSM but no change for installation process, I followed the same way as for DSM4.2_b3211 http://xpenology.com/forum/viewtopic.php?f=2&t=1698 It works like a charm as Fresh Install, as well as update from DSM4.2_b3211 to DSM4.3_b3810 with basic datas on drive I did not check with other services.

juste pour confirmer que la procedure d'installation reste identique aux autres versions, en l'occurence pour Proxmox/Kvm, j'ai appliqué la procédure decrire ici http://xpenology.com/forum/viewtopic.php?f=13&t=1713 Cela vaut aussi pour la mise à jour DSM4.2_b3211 vers DSM4.3_b3810

Fresh Install inside a proxmox/KVM works like with DSM4.2_b3211 now let's try with data loaded system Edit : 10 minutes later, with data loaded system, just do like a normal installation, just untick the "format data drive" button if it is available (it was not on my KVM) this rocks

Ceci est la traduction de mon post fait en anglais hier ( http://xpenology.com/forum/viewtopic.php?f=2&t=1698 ) ------ Bonjour, juste pour confirmé l'installation sans souci du XPEnology DS3612xs DSM 4.2 build 3211++ (repack v1.2) sur un Proxmox v3 en utilisant la virtualisation KVM. Je me suis inspiré de la configuration pour un virtualbox que j'ai adapté ou c'etait necessaire. 1°) creer la machine KVM avec : - un disque IDE-0, taille 33MB (mettre 0.032 dans la case du proxmox) - autant de disque SATA que vous voulez et qui seront utilisés pour les DATA 2°) convertir le fichier synoboot...img fournit dans le repack v1.2 dans le format de votre disque IDE-0 en utilisant la ligne de commande de votre proxmox sur ma machine (ou ma VM a l'ID 106) cela donne qemu-img convert -f raw -O qcow2 synoboot-trantor-4.2-3211-v1.2.img vm-106-disk-1.qcow2 3°) demarrer la machine virtuelle 4°) utiliser l'assitant synology pour detecter votre VM et installer le .pat fournit. 5°) pendant l'installation, la VM doit rebooter, mais l'installeur a efface le disque IDE-0, il suffit de stopper la VM, refaire l'etape 2, relancer la VM 6°) Voila, ca boot sur votre DSM4.2 KVM Enjoy 20131122 : Edit : les disques data doivent etre >4Go sinon l'installeur se plante lors du formatage de la partition systeme

should be enough, I run it on virtual machine with one core 1.7Ghz, 512MB RAM, 4GB Hard drive for OS, multiple virtualdisk for data even if I did not look at specific option, it is intend to be a NAS environnement running on low power hardware so it must be low power even on real machine. I would say yes, just dont create the SHR while you install. then on first login, go create a custom volume and select the Samsungs hdd for data disk

I'll give a try tomorrow from same machine as yesterday and let you know if it works. I had time to test, I don't know if it is libreoffice and macro fault but the document is protected with password, thus I can't modify the mac adress cells

ver2.1.xlsb doesn't work for me looks like it is write protected thus I can't modify the MAC address cell's btw I found this simple trick. 6 packs are the MAC address, 7th pack is the checksum but checksum is pretty simple it looks like it is a simple sum of bits. in my case, I add 1 to the last pack of MAC Address, then add 1 to the checksum and as pictures show you can add 1 wherever you want inside the MAC. ex : first is : 00:22:32:08:D6:3C, checksum : 6e second is 00:24:32:08:D6:3C, checksum : 71 (6E +2) I have a simple Serial like B3J4N00310 in the hexedit it appears as B3J4N003105 I juste update my serial by 1 makes : B3J5N00311 and change checksum to 6 works like a charm

Hi, just to confirm I was able to install XPEnology DS3612xs DSM 4.2 build 3211++ (repack v1.2) on my proxmox v3 server using KVM virtualisation. I just followed the virtualbox howto and adapt where need. 1°) create a KVM machine with : - IDE harddrive, size 33MB (set 0.032 in the proxmox menu) - any SATA drive the size you want but more thant 4GB that would be used as data 2°)according to the disk format you setup in step1, convert the synoboot...img into vm-xxx-disk-1.qcow2 using this command line in the proxmox shell on my machine this gives me (my VM id is 106): qemu-img convert -f raw -O qcow2 synoboot-trantor-4.2-3211-v1.2.img vm-106-disk-1.qcow2 3°) boot this machine 4°) launch the synology assistant and install the pat file provided 5°) the first reboot failed as installer reformat the IDE0 drive, simple workaround : just redo the step2 to recreate the IDE0 drive 6°) finally boot into your brand new DSM4.2 KVM. Enjoy 20131122 : Edit : if data drive are 4GB the installer fails while formating system partition, I directly upgrade to 8GB and installer works fine