Jordanie
-
Posts
26 -
Joined
-
Last visited
Posts posted by Jordanie
-
-
I would like to also add my thanks to Trantor and Gnoboot for their very worthwhile work
By me all is working fine and i want to say THANKS TOO for have this nice solutions +1
-
Hi,
bei mir werkelt hier ein Asus H87-I Plus und ich bin mehr als zufrieden.
Der Stick bzw. CD muss am Board bleiben
-
Hi,
bei mir werkelt hier ein Asus H87-I Plus und ich bin mehr als zufrieden.
Der Stick bzw. CD muss am Board bleiben
-
btw. before i had test the system with Windows 8.1 and WOL is working right too
-
Yes in moment it is working.. if i have time i will make a test with 4.3 again.
the only i had change was the to BETA 5 and build in a housing ....may the Ground connection fix the problem ?
-
here my output:
Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised auto-negotiation: Yes Speed: 1000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 2 Transceiver: internal Auto-negotiation: on Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000007 (7) Link detected: yes
In moment i test it by the XPE Beta 5.0 without any changes .....only set the right MAC adress in the vendor file and WOL is working
My first posting was tested with XPE 4.3
-
btw. use: ethtool -s eth0 wol g and WOL is working fine on this mainboard
-
Schaut doch mal in das Englische Forum, da steht es genau beschrieben
Gruß Jordanie
-
Now the beta is ready to download: http://download.synology.com/download/beta/DSM5.0_beta/4418/
regards Jordanie
-
Zajímalo by mě, jaký bude život Compakt Flash Drive? Když je systém instalován na flash disk. Má někdo zkušenosti? A jak dlouho to bude fungovat?
by translator : I wonder what will be the life of the Compakt Flash Drive? When the system is installed on the flash drive. Has anyone had experience? And how long will it work?
-
I use a Asus H87I-PLUS Mainboard and the last xpenology 4.3
I have a problem if i use the WOL function
After shutdown from WebInterface the system goes down and after 1-2 second it start again.
Any people see the same ?
Is this a driver problem ?
thanks for feedback
Jordanie
-
Hi,
first thanks of your work
I use a Asus H87I-PLUS Mainboard and the last xpenology 4.3.
If i activate the power up on pcie event (WOL) and shutdown the system over xpenology shutdown button the system goes down und aver 1-2 second it start up again.
Is this a driver problem ?
thanks forr feedback and see you
-
Danke für die Info
...gibt es denn schon was neues zum Thema S3 ?
-
cool....fine and easy
but if i want to set the right´s i must initialize the stick before ? (and than it is empty right ?)
thank you
-
Ja genau so hatte ich mir das auch gedacht.
Würde mir auch den HP N40L kaufen aber der unterstützt leider kein S3 Mode
-
-
-
-
-
Hi Leute,
Ich habe mir das DSM 4.1 auf einer Test-Kiste installiert.
Coole Sache das
Das Mainboard was verwende unterstützt den Power Mode S3 aber ich denke das Image beinhaltet das so nicht da das System nicht in den Standby geht.
Macht wahrscheinlich keinen Sinn bei den "dicken" Maschinen da Raid etc.
Ich bin es von meiner DS212+ so gewöhnt das sich das NAS nach einiger Zeit schlafen legt.
Ich nutze das System nur als "Daten-Grab" und finde die funktion sehr gut zum Strom sparen.
Lässt sich das auch hier irgendwie einbinden ?
Gruß Jordanie
-
Vielen Dank für deine Übersetzung !
Gruß Jordanie
-
Hi Dear,
i use the image on a mainboard that support ACPI S3 but i think this image are not ?
is is possible to add it ?
i know this from my real DS212+ (i don´t know but i think they do this on S3 way)
i know the DS3612 isn´t a home system but i like the funktion
thanks and bye
Jordanie
-
have thanks,
it works ....now i have a booting stick
i hope i will find a working mainboard on my private stock
cu
Jordanie
-
first big thanks and respect for this project !!!
I had test the synoboot.vdi in a vmbox and it working fine but now i will testing some mainboard´s direct
one question: synoboot.img - Image file of synology boot disk
it is for making a boot "disc" "usb-stick" or i understand something wrong ?
i can´t burn synoboot.img on a disc i got a fault (wich program must i using)
the same for make a stick with the synoboot.img
thanks for help
Jordanie
[SPK] nClone - disk cloning frontend that runs on your NAS
in Archives
Posted
Hi,
is there some news about using by DSM 5.0 ?
Thanks Jordanie