hy9a00
-
Posts
16 -
Joined
-
Last visited
Posts posted by hy9a00
-
-
Dear Andy,
Can you tell more about Synobios Modification? should we use HEX editor to edit the file?
Thank you.
-
So I shall rebuilt the kernel myself..... Ah.....
-
my Asrock AD2700-ITX can install and boot. However the DSM cannot see any network interface and hence some functions reported error, such as Resources Monitor, FileStation and control Center.
The LAN is Realtek RTL8111E onboard.
Any help?
-
my Asrock AD2700-ITX can install and boot. However the DSM cannot see any network interface and hence some functions reported error, such as Resources Monitor, FileStation and control Center.
The LAN is Realtek RTL8111E onboard.
Any help?
-
my Asrock AD2700-ITX can install and boot. However the DSM cannot see any network interface and hence some functions reported error, such as Resources Monitor, FileStation and control Center.
The LAN is Realtek RTL8111E onboard.
Any help?
-
Andy,
Thanks. I need time to study and try.
Any more clue on adding custom firmware driver? Thanks.
-
You can add the necessary drivers when you enter menuconfig on Device Drivers
Can you tell more? I am not good in linux.
Thanks.
-
Besides, can you suggest any distro linux is better for this kernel compilation?
Thanks.
-
hello,
I want to install on Asrock AD2700-ITX (it's on the hardware supported list) but I can't load the kernel (error This Kernel requires an x86-64 CPU, But only detected an i686 CPU. Unable to boot - Please use a kernel approprate for your CPU.)
I've installed DSM4.1 2668 on my AD2700-ITX without any problem. I use a 2G usb stick as boot media.
You may try the following steps:
1. restore to factory default.
2. set storage configuration to AHCI
3. Turn off all unnecessary items, such as parallel port, serial port etc.
I hope it helps. Do not use 4G or above as boot, I encountered some errors and I dont know why.
-
Nice. Thanks for your walkthrough.
Can you add more topics about how to add custom drivers?
-
Dear Andy,
Thanks for your sharing. However, can you advise a walkthrough for making the custom built? I am not good in Linux.
Thanks
-
The built is working on my Asrock AD2700-ITX. Shutdown works perfectly for NM10 chipset. Still testing for other functions.
Thanks Andy.
It would be great if you could write a walkthrough how to make the driver and compile the built Thanks.
The Resource Monitor does not work and the Error message prompt for File Station....
-
I would like to say Thank you to all....
-
The built is working on my Asrock AD2700-ITX. Shutdown works perfectly for NM10 chipset. Still testing for other functions.
Thanks Andy.
It would be great if you could write a walkthrough how to make the driver and compile the built Thanks.
-
Dear all,
Asrock AD2700-itx, can install but shutdown doesn't work. Not stable, always report disk crash or disk error.
DQ45EQ, works well.
Thanks Andy.
XPEnology DS3612xs DSM 4.2 build 3211++ (repack v1.2)
in DSM 5.2 and earlier (Legacy)
Posted
Asrock AD-2700 ITX installs successfully.
Thank you all.