hy9a00

Asrock AD-2700 ITX installs successfully. Thank you all.

Dear Andy, Can you tell more about Synobios Modification? should we use HEX editor to edit the file? Thank you.

So I shall rebuilt the kernel myself..... Ah.....

my Asrock AD2700-ITX can install and boot. However the DSM cannot see any network interface and hence some functions reported error, such as Resources Monitor, FileStation and control Center. The LAN is Realtek RTL8111E onboard. Any help?

my Asrock AD2700-ITX can install and boot. However the DSM cannot see any network interface and hence some functions reported error, such as Resources Monitor, FileStation and control Center. The LAN is Realtek RTL8111E onboard. Any help?

my Asrock AD2700-ITX can install and boot. However the DSM cannot see any network interface and hence some functions reported error, such as Resources Monitor, FileStation and control Center. The LAN is Realtek RTL8111E onboard. Any help?

Andy, Thanks. I need time to study and try. Any more clue on adding custom firmware driver? Thanks.

Can you tell more? I am not good in linux. Thanks.

Besides, can you suggest any distro linux is better for this kernel compilation? Thanks.

I've installed DSM4.1 2668 on my AD2700-ITX without any problem. I use a 2G usb stick as boot media. You may try the following steps: 1. restore to factory default. 2. set storage configuration to AHCI 3. Turn off all unnecessary items, such as parallel port, serial port etc. I hope it helps. Do not use 4G or above as boot, I encountered some errors and I dont know why.

Nice. Thanks for your walkthrough. Can you add more topics about how to add custom drivers?

Dear Andy, Thanks for your sharing. However, can you advise a walkthrough for making the custom built? I am not good in Linux. Thanks

The Resource Monitor does not work and the Error message prompt for File Station....

I would like to say Thank you to all....

The built is working on my Asrock AD2700-ITX. Shutdown works perfectly for NM10 chipset. Still testing for other functions. Thanks Andy. It would be great if you could write a walkthrough how to make the driver and compile the built Thanks.