[XPEnology DS3612xs DSM 5.0-4418 (BETA)]

I found that it was not speedstep stopping at boot, it was Intel C-State.

Now multiplier is set to Auto, Speedtep enabled and C-State disabled, shutdown works.

 

WOL doesn't work

I changed vender file and set wake from PCI/PCIE devices

tried to enable wol on lan1 but the check mark doesn't show after applying

after shutdown the rj45 status leds are off, no power

[XPEnology DS3612xs DSM 5.0-4418 (BETA)]

Hi

 

First, a big thank you for providing this version

 

I'm trying this hardware:

Asus P5Q - ICH10R 6xSata - Sil5723 2xSata - Marvell 1xIDE - Atheros L1E

Xeon X5450 3Ghz (mod 771)

4Gb DDR2

2x500 Samsung SATA

 

I had to set a fixed cpu multiplier because with speedstep enabled it stopped with something "..cpu idle...changing to hpet"

 

Sata is set to AHCI in ports 1/2 of ICH10R

 

DSM is installed, hdds set to RAID0, fixed IP, installed apps, mkv copy at 113 MB/s - nice

 

hdd hibernation is working

reboot also works but shutdown is not working properly, I can ear hdds powering off but fans keep on

 

Does anyone now what setting should I change in BIOS?

 

Is there any benefit of AHCI?

I think at first sata was in IDE enhanced mode and shutdown worked, but I changed so many things in BIOS to figure out the multiplier setting, that now I don't know

 

The control panel icon is showing a number 1 in a red circle, what is it?

[[SOLVED] Installing XPEnology in VirtualBox]

Hi, after some startup noob failures I have now a 4.3 xpenology Vbox running with no problems.

 

I managed to set the real MAC address, static IP, ddns from dyndns, rsync setup.

 

Its main purpose is for a rsync backup over internet from a Qnap box, so for now lan speed is not a concern.

 

hardware:

Asus P5Q

Pentium DC e6300 2.8

4Gb DDR2

1 NIC onboard Gb

1 NIC PCI realtek Gb

2x500 SATA

2x120 IDE raid

 

virtual machine is set with one cpu core, 2gb memory, 400gb dynamic hd, realtek NIC bridged to virtualbox host

 

some useful info based in my setup

 

.if your VM can't get IP from DHCP you have to set the MAC network address with the first one that appears at the VM Startup (list of four)

.if you want to use the real MAC address of your NIC and you can't read the vendor file with ext2fsd with a windows 64bits try ext2isf

.if you want to use a static IP to setup ddns and configure your router portforwarding manually (my router is not listed and couldn't setup with upnp), leave the bridge (MAC bridge miniport) with automatic dhcp address and setup a static IP in your XPenology network settings

 

 

 

Thank you all for the info of this tutorial

[[SOLVED] Installing XPEnology in VirtualBox]

I'm trying to test xpenology in virtual box in a Dell Precision 670 dual xeon 3.6, but it shows "...kernel require x86-x64 cpu, but only detected i686cpu...", are these cpu not supported?