-
Posts
75 -
Joined
-
Last visited
Posts posted by DHD
-
-
Thank you very much! Problem is gone
-
After update to DSM 5.0-4493 Update 3 and some reboot, I've lost permission for some my own folders. I can not change folder permission also.
I created new User (admin group) but can not apply R/W permission for these folders.
What should I do now?
Thank you very much!
-
Dear @Trantor,
How do we use sound card on board?
Thanks!
-
I can't get ver2.zip from the link https://www.dropbox.com/s/237xzol4ct9coz5/ver2.zip.
Is there anyone help to send a copy to my email: andrewcheng2007@outlook.com?
Thanks a lot.
New link: https://www.dropbox.com/s/237xzol4ct9coz5/ver2.zip
-
Sorry for a dump question
I'm thinking about install a DVR capture card on my xpenology and use some outdated cam for surveillance station. I prefer SK-2000F aka SDVR-404 EW1004.
So, anyone has sucssess to use a DVR card on xpenology for surveillance station?
-
-
-
I changed MAC address, SN, default ports and SN but still be attached from China's IP (218.6.6.70 =>Fuzhou, Fujian, China).
Please teach me how to check someone success attach my NAS or not?
-
I changed MAC address, SN, default ports and SN but still be attached from China's IP (218.6.6.70 =>Fuzhou, Fujian, China).
Please teach me how to check someone success attach my NAS or not?
-
I have another issue but with DSM 4.3.
Everything works fine but I can't change the Mac adress. I succeded to download and modify the vendor file via winscp but I'm unable to replace the original file (the SD card is not protected), I have a denied permission to modify this file.
Do you have an idea?
Log in as root, not admin. root password same as admin password.
-
Trantor, can you please add support for Shutdown from the Power button in the next release?f /proc/acpi/event is not present then the kernel has no acpi support enabled. I think the kernel needs to be recompiled with:
CONFIG_ACPI=y
viewtopic.php?f=2&t=889&start=30
Thank you!
+1
-
I read somewhere that there is no need to modify serial / MAC if you have only 1 DSM and not requiring WOL.
So I installed the package with default settings.
However, when I set the DS CAM, I already received some motion detection alert from other DSM devices, even though I disabled all my Camera.
I also receive some alert email that were totally non-sense to me. Like hdd overheat (where I uses ESXi so no SMART status could be detected).
Is this something like notification center that will remeber some of the key for broadcasting DSM system message?
How can I prevent? thanks alot.
Same problem and same solution: viewtopic.php?f=2&t=1826
-
Trust me, you change serial and problems are gone. No back door and no one try to "hack" your XPEnology.
Because, your XPEnology used 'universal' serial. Therefore when DS Finder connect to Synology's server it will receive alerts from another XPEnology that use the same serial with yours.
Guide to change serial is here: viewtopic.php?f=2&t=1353
-
I use 'advanced power manager' instead. It working like a charm.
Could you share more details ?
Do you mean "Advanced Power Manager for Synology DS" ?
http://sourceforge.net/projects/advpowermgr4ds/
Does APM bios reset ? (I know that sheduled poweroff-poweron resets bios on XPEnology)
Yes, it's. It's works on my NAS without any problem.
-
I just wanted to see if anyone might know how the synology system determines to spin the drive backup and if it's controllable.
My drives spin down fine at the pre-determined time in the settings, however, once spun down, it sometimes randomly spins backup. I want to see what others' experience has been like on this subject.
I have a HP N40L with 6 x 2TB drives, running on DSM 4.2 Trantor 1.2 repack
Otherwise it's working well...minus OpenVPN, I've wasted a lot of time trying to get it to work with certificates and haven't had any luck.
May be "Download Station" is running...
-
I just bought N54L and I am going to give DSM4.3 a try. I have been reading a lot but I could not find an answer to this question: How much memory is needed to run DSM4.3? I have read that to run FreeNAS you need 8G or 16G in order to get good performance (caching ZFS data). Does more memory help DSM performance-wise? is the 2G RAM good enough for streaming one 1080P video?
Thanks,
Jed
For me 512MB is enough for run DSM 4.3 and 20+ packages
-
Thank you!
I was repair my NAS by force "update" with PAT file.
I will try install Zoneminder again in the weekend.
-
I use 'advanced power manager' instead. It working like a charm.
-
This is because you are not in Debian.
Did you install (Package center) Perl and Debian Chroot ?
To enter debian after installation:
chroot /volume1/@appstore/debian-chroot/var/chroottarget/ /bin/bash
Wow, you just not remind that we need install Perl
I was followed your guide and DSM notify
'Dear user,
The system has detected an abnormality on ABC. In order to protect your data, all volumes have been unmounted. Please contact the Synology support team for further assistance.
Sincerely, Synology DiskStation'
Now it still running but I cannot reach the web interface... I don't know what I'm wrong
If you have some free time, please recheck your guide and an automatic install script may have newbie (as me) a lot. Thank you!
-
DSM always says "can not setup WOL", just ignore it and you still can use WOL.
-
After an entire day o work, I've installed Zoneminder on my xpenology with DSM 4.3 from Trantor.
Step by step guide:
http://forum.softpedia.com/topic/949784 ... gy-succes/
Is in Romanian language, but it can be easily translated with google translate.
Thank you!
But I get error "bash: apt: command not found" when run "apt update"
-
Hello
Sorry to have a noob question, i am under Proxmox and when i am connected to the Syno via winscp,
and i dont have any /volumeUSB1/usbshare
So i don't know where i can find vender file.
If someone can help me, it would be glad.
Thx
Batgod
Sorry but I never ever use Proxmox. I think volume name just as same or maybe named with different suffix number (eg. /volumeUSB2/ or /volumeUSB3/...)
-
There is something that i dont get.
You write that 00223208D63C will be into
00223208D63C6E
00223208D63C71
00223208D63C6c
00223208D63C5B
BUT, where do you get 6E, 71, 6C and 5B from??
and what about my mac adress, do i just put 6E, 71, 6C and 5B behind that??
Clear content and input you MAC address(se), don't care about the sample...
-
same problem here, on mac.
The sheet is locked!
Please open with MS Excel
Nanoboot USB Audio Compatibility
in Archives
Posted
Just tested Nanoboot 5.0.3.2 with no-brand USB Audio dongle. It is worked perfectly