dml33
-
Posts
7 -
Joined
-
Last visited
Posts posted by dml33
-
-
Hi.
I have tried the 6 ports at the rear panel: 2 USB2 and 4 USB3, plus 1 USB 2 and 1 USB 3 at the front of the case. In all of them, the grub menu appears, the Loading /zImage... OK, as well, but it always stops there...
I have default UEFI settings in BIOS. (V1.30). Also, I tried disabling WIFI signal, com serial and setting primary VGA onboard.
I have connected the PC to a TV via HDMI-HDMI and DVI-Hdmi. Also, to a monitor HDMI-DVI.
Any more ideas? If it works for you, please help me to find the correct way
Thanks!
-
Also, I have just tried the new XPEnoboot_DS3615xs_5.2-5644.4.img and it hangs too. If I add debug mode, it appears:
Loading /zImage... ok early console in setup code
And it hangs.
-
Did you try on USB2 ports instead of USB3 ?
Try to boot in debug mode and/or remove loglevel=0 from boot command line (in syslinux.cfg or grub console) in order to show more informations.
Hi.
Thanks for the reply.
I tried with a USB 2.0 pendrive in both USB2 and USB3 ports, but it did not boot from any.
I have also tried NanoBoot-5.0.3.1-fat.img
If I select debug mode, after the dots and the "ready", "early console in setup code" appears, and it hangs there.
Firstly, I thought it could be VGA related, so I used vga=ask instead of vga=0x305, but nothing happens. It hangs anyway, even without the prompt which let you list and choose the desired vga mode. (I saw what should appear with the vga=ask by booting it in VirtualBox. There, it works perfectly).
I tried "ubuntu-15.10-desktop-amd64.iso". It boots in UEFI mode perfectly and works correctly. If you want, I can post a dmesg.
What else do you want me to try?
Thanks.
-
Hi.
I am trying to install XPEnology on a N3150-ITX, but I cannot make it even boot. It gets stuck in "Loading zImage OK".
From http://download.xpenology.fr I have tried:
-
XPEnoboot_DS3615xs_5.1-5055.1.img
XPEnoboot_DS3615xs_5.2-5565.2.img
XPEnoboot_DS3615xs_5.2-5592.2.img
From http://xpenology.pety.me/ I tried an old NanoBoot. It also loads the zImage and gets stuck at "ready". It does not boot either.
- NanoBoot-5.0.4.1-fat.img
FreeNAS 9.3.1. boots correctly (with xhci_load flag enabled). I also tested successfully the RAM memory with MemTest86. All images boot correctly in VirtualBox.
In the General Discussion section, somebody said that there could a problem with some missing drivers.
Please, tell me how to proceed to give you as many details/data as possible to make it work.
Thank you in advance.
-
-
Hola.
Estoy intentando instalar XPEnology en una placa N3150-itx, pero siempre se queda colgado en "Loading zImage"
He probado las siguientes imágenes de http://download.xpenology.fr grabadas en un pendrive:
XPEnoboot_DS3615xs_5.1-5055.1.img
XPEnoboot_DS3615xs_5.2-5565.2.img
XPEnoboot_DS3615xs_5.2-5592.2.img
De http://xpenology.pety.me/ he probado también con NanoBoot. Hace parecido. Carga la imagen, salen un montón de puntos y se queda en "ready". No es capaz de arrancarla...
NanoBoot-5.0.4.1-fat.img
Qué puedo hacer?
FreeNAS 9.3.1 arranca correctamente y he testeado la memoria con MemTest86 y todo correcto.
Gracias!
-
Hi.
I am just trying to install XPEnology in a N3150-itx motherboard, but, every time it gets stuck in "Loading zImage"
From http://download.xpenology.fr I have tried:
- XPEnoboot_DS3615xs_5.1-5055.1.img
XPEnoboot_DS3615xs_5.2-5565.2.img
XPEnoboot_DS3615xs_5.2-5592.2.img
From http://xpenology.pety.me/ I tried an old NanoBoot. It also loads the zImage and gets stuck at "ready". It does not boot either
- NanoBoot-5.0.4.1-fat.img
FreeNAS 9.3.1. boots correctly. I also tested successfully the RAM memory with MemTest86.
Could anyone help me?
Thanks!
- XPEnoboot_DS3615xs_5.1-5055.1.img
Drivers requests for DSM 5.2
in DSM 5.2 and earlier (Legacy)
Posted
Hi.
I finally made it work by connecting it DVI-DVI to a different monitor.
What resolution uses Xpenoboot? Just after decompressing the zImage and booting up, when Xpenoboot label is displayed and everything is detected.
There must be a handshake problem regarding the resolution/video driver when I was connecting it to a 720p TV HDMI-HDMI or HMDI-DVI to a LG 19'' Wide-screen 1440x900. It hung all the time.
Anyway, it would be nice if Xpenoboot could boot anyway so, in case of a problem in that phase, could use a VESA safe resolution or the exception could managed somehow so the booting process continued.
Ah, I used a USB 2.0 pendrive and it worked flawlessly in all USB3 and USB2 ports.
Regards.