le.pipo007
-
Posts
52 -
Joined
-
Last visited
Posts posted by le.pipo007
-
-
5 hours ago, evolucja said:
Works perfectly on my ESXi. I didn't use however any OVA files but just cloned my DSM machine (with synoboot.img) and then installe DSM from scratch.
Also I mounted folder from NAS1 on NAS2 directly in Surveillance Station as Remote. No need to use /etc/fstab
What is the minimum hardware for the DSM2 I can set on ESXi? Currently I have 1 CPU and 1 GB RAM and it works fine but wondering if I can lower the ram.
I put 512mo it’s a little slow, but on a ssd it’s ok.
-
Surveillance station in CMS need to have the same version. Verify that. I have this problem when surveillance station is updated. I need to update all my surveillance station.
-
ok, thanks, i try to launch it, without reboot !
-
On 5/16/2020 at 7:21 PM, Ionlab said:
FYI the 4sag package also Works with DSM 6.2.3-25426
hi
i don't understand, you download this file? https://spk.4sag.ru/packages/hp_ams-5.2_2.5.0-1.spk
for me, it not starting!
how can you do that?
-
- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922 Update 6
- Loader version and model: JUN'S LOADER v1.03b - DS3615xs
- Using custom extra.lzma: YES
- Installation type: HP Microserver Gen 8 CPU Xeon E31260- Additional comments: Becareful ... you have to create a new usb key !
I spend 2 hour to understand!
if you use extra.lzma, you have to download the version 0.11 for 6.3 (http://s000.tinyupload.com/?file_id=04147311964729253115 for 3615)
download also the pat file https://archive.synology.com/download/DSM/release/6.2.3/25426/DSM_DS3615xs_25426.pat
extract the zImage file and rd.z and put the 3 files (extra.lzma, zlimage and rd.z) into the usb key.
after that... it's working...
-
1
-
-
Important: the MAC address for the OVA is 0011322CA785
threrefore the VM won't start
-
DSM62.7z.002download the 2 file, and extract it with 7zip
-
-
- Outcome of the update: SUCCESSFUL
- DSM version prior update: DSM 6.2.2-24922-2
- Loader version and model: Jun's Loader v1.03b DS3615
- Using custom extra.lzma: NO
- Installation type: BAREMETAL - HP microserver g8 gt1610
- Additional comments: Reboot required
-
Hi, any news about hp-ams with DSM 6.2 ?
-
Hi,
I'll explain the step to create a DSM 6.2 on virtual machine manager1/ download the xpenology vmdk (https://mega.nz/#!fdBWBJYB!P3MbGY2v_X_udUhaSgVBQZ74KNRf7vtjMCO39u1I91Y)
2/ extract only synoboot.vmdk
3/ download the 6.2 loader Jun 1.03b(https://mega.nz/#!OV4gVKyZ!dCgfXx1bgAOyvbFwFiov3s7RSNoFuqnAcNmSllLoUiw)
4/ extract only synoboot.img and copy it in the same directory to synoboot.vmdk
5/ Download and install vmware workstation 15 pro (eval version)
6/ if you want, you can change Serial and MAC on synoboot.img (use ofsmount, and modify grub.cfg) the default mac is 00:11:32:2C:A7:85, you will need it later in vmware
7/ create a new VM on vmware workstation:
- Custom (advanced)
- Harware compatibility workstation 15.x
- check "i will install the operating system later"
- Linux, other linux 3.x kernel 64-bit
- Virtual machine name: DSM62 for example
- CPU 1, core 1
- RAM: 2048 MB
- Use Network address translation (NAT)
- LSI logic
- SATA (default is scsi)
- Use an existing virtual disk
- select synoboot.vmdk
- Finish
- right click on the VM, click on settings,* Add a new hard drive (10 Gb), SATA, store virtual disk as a single file, after create, click on disk, and advanced, virtual device mode: SATA 1:0
* after select Network Adapter, click on Advanced, end at botton, write the MAC address
- Start the VM, ensure that when you boot, you select "DS3615xs 6.2 Baremetal with jun's Mod v1.03b" (IMPORTANT!!!)
- select the VM, then, click on File, Export to OVF, now, change the extension to OVA.
8/ On synology virtual machine manage
- click on create button, selec import
- import from OVA
- select the OVA that you have just generated
- select your vm repository
- write a name, modify (if you want) cpu and RAM
- virtual disk: 10 GB
- network: important, select e1000, and put the mac
- and finish to create the vm
- when the vm is create, you have to add a SATA drive (10GB also)
- start the VM
- find your DSM in synology assistant
- Install manually the pat file https://archive.synology.com/download/DSM/release/6.2/23739/DSM_DS3615xs_23739.pat
Done, your dsm6.2 is installed, you just need to install surveillance station.
-
Hi
yes, i just arrived to update to dsm 6.2 but not the last update.
-
On 5/3/2019 at 12:28 AM, dvdxtreme360 said:
Hi guys. I'm new to this site and new to xpenology.i finally managed to convert my old dell t7400 with dual quads and 12gb ram Into a working ds3617xs. I then found some cheap cameras svc3 and when I saw they worked (after a bit of messing) I went out and and bought some more thinking it would be simple but I've now connected a third( soon to be forth) and had the message wanting me to purchase a liesence .I came across your post but I find it hard to follow and really could do with baby steps.i will follow your post tomorrow but don't wanna mess up things worse so can anyone tell me that the above ds3617xs will work with what I do in this tutorial .
Hi,
how can help you?
-
On 3/22/2019 at 6:32 PM, sadycus said:
@le.pipo007
No, there is no need to change the CPU if you use the DS3615xs loader.👍
MANY MANY MANY thanks sadycus
yesterday i have receive my network card from amazon, i plug it into my microserver gen8, disabled integrated network, and i have update successfully from dsm 6.1 to 6.2.1 U6 !
PERFECT !
just a little problem, HP-AMS no more working
ash-4.3# /sbin/amsHelper -I0 -M1,5,14,16,18,23,99
This program requires the host to have a HP Integrated Lights Out 4 (iLO 4) BMC
i have ilo firmware 2.61 (the last one)
Does anyone have success use hp-AMS on DSM 6.2.1 u6?
Regards.
-
Hi, I just update my microserver gen8 to the last DSM 6.2.1 u6
HP AMs not working,
i follow your recommandation, but not working
ash-4.3# /sbin/amsHelper -I0 -M1,5,14,16,18,23,99
This program requires the host to have a HP Integrated Lights Out 4 (iLO 4) BMC
i have ilo firmware 2.61
Does anyone have success use hp-AMS on DSM 6.2.1.?
Regards.
-
i don't understand, the OVA are in the 4 zip file, i can download it!
-
hi @sadycus
do you change the CPU?
Regards
-
Hi all,
i'll like to update my microsorver gen8 GT1610 to dsm 6.2.1, can i do this directly, or must i change CPU (and wich cpu) or network card (also, which card?)
Regards.
-
Hi, sorry for the late,
this is my configuration:
on the old DSM
You just have to put the IP of the new DSM on surveillance folder
on the new DSM, nothing on nfs on surveillance
just connect on the new dsm with ssh
after connexion, do sudo su and write your password
after that, vim /etc/fstab
i just add at the bottom
x.x.x.x:/volume3/Surveillance /volume1/surveillance nfs defaults,user,auto,noatime,intr 0 0
replace x.x.x.x by your IP and replace volume1, or 3 by yours.
after that, mount -a
and if you go on filestation on the new dsm, you will see the surveillance folder from the old DSM
-
1. For nfs, go to settings and share , on « surveillance » folder, go to nfs tab, add the IP of the new dsm
i think it’s Your problem.
I ´m not in front of my dsm i’ll contact you on monday, but when i don’t see the folder on the new dsm i was wrong on the ip
-
Non hélas je pensais que ça intéressait plus la communauté internationale !
je peux traduire ce tuto mais pas avant la semaine prochaine ! Désolé.
-
-
-
The New Active Backup
in Synology Packages
Posted
hello,
the api url change
try this (it's working for me)
https://your-ip:5001/webapi/auth.cgi?api=SYNO.API.Auth&version=3&method=login&account=admin&passwd=your_admin_password&format= cookie
the other url (for activation) not change
https://URL:PORT/webapi/entry.cgi?api=SYNO.ActiveBackup.Activation&method=set&version=1&activated=true&serial_number="SERIALNUMBER"
regards