AllGamer Posted July 3, 2016 Share #1 Posted July 3, 2016 XPEnology Boot USB drive keeps showing up as HDD A motherboard and SAS/SATA controller with 12 USB ports, 0 eSATA, and 24 combined SATA ports maxdisks="24" esataportcfg="0x000000000" usbportcfg="0xfff000000" internalportcfg="0x000ffffff" 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 = esataportcfg 0000 0000 1111 1111 1111 0000 0000 0000 0000 0000 0000 = usbportcfg 0000 0000 0000 0000 0000 1111 1111 1111 1111 1111 1111 = internalportcfg maxdisks="24" esataportcfg="0x000000000" usbportcfg="0x000000000" internalportcfg="0x000ffffff" 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 = esataportcfg 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 = usbportcfg 0000 0000 0000 0000 0000 1111 1111 1111 1111 1111 1111 = internalportcfg tried setting USB to Zero, and it still shows up. Link to comment Share on other sites More sharing options...
Arcao Posted July 3, 2016 Share #2 Posted July 3, 2016 Short answer: Find out VID and PID of your usb drive and update syslinux.cfg on your XPenoBoot drive. More: How to see the value of my VID & PID stick Hide usb drive Link to comment Share on other sites More sharing options...
AllGamer Posted July 3, 2016 Author Share #3 Posted July 3, 2016 Short answer: Find out VID and PID of your usb drive and update syslinux.cfg on your XPenoBoot drive. More: Hide usb drive Thank you! That came in handy. for future reference, if anyone has a SanDisk Cruzer Fit 8GB, this is the vendor id and product id: P: Vendor=0781 ProdID=5571 Rev= 1.00 S: Manufacturer=SanDisk S: Product=Cruzer Fit Link to comment Share on other sites More sharing options...
Recommended Posts