Labotomy Posted August 17, 2022 Share #101 Posted August 17, 2022 Господа, нужно установить DSM на ESXi за денюшку. Кто готов заняться? Quote Link to comment Share on other sites More sharing options...
igonet Posted August 18, 2022 Share #102 Posted August 18, 2022 Здравствуйте, вчера мучался с установкой DSM 7 на Proxmox (на beelink U59) по данному гайу - так и не взлетело. Однако получилось развернуть DSM7.1 с пол-пинка из бэкапа DS3622xs отсюда (не смотрите, что тема по DSM6.x в последних постах про DSM7.1) Quote Link to comment Share on other sites More sharing options...
sandercube Posted August 19, 2022 Share #103 Posted August 19, 2022 А может кто сталкивался с тем, что скорость чтения/записи на прокинутый физический диск в вирт.машину dsm очень низкая 60 мбайт/c (запись) 100 мбайт/c (чтение), по сравнению с заявленными производителем харда. Может не хватает какого то драйвера? Либо в самом Proxmox драйвера не хватает? Либо это в принципе какое то ограничение виртуализации Proxmox? Кто с таким сталкивался? Прошу помощи, совета в какую сторону гуглить? Quote Link to comment Share on other sites More sharing options...
Joyz Posted August 22, 2022 Author Share #104 Posted August 22, 2022 В 17.08.2022 в 21:10, Labotomy сказал: Господа, нужно установить DSM на ESXi за денюшку. Кто готов заняться? Установка на ESXi почти ничем не отличается от установки на Proxmox за мелкими исключениями. Quote Link to comment Share on other sites More sharing options...
Joyz Posted August 22, 2022 Author Share #105 Posted August 22, 2022 (edited) В 18.08.2022 в 11:05, igonet сказал: вчера мучался с установкой DSM 7 на Proxmox (на beelink U59) по данному гайу - так и не взлетело. Основная проблема нового загрузчика это, что теперь надо добавлять руками драйвер для сетевых карт virtio/e1000/rt8139 которые эмулируются в proxmox. Кто-то добавляет еще драйвер acpid, но у меня и без него все работает. В связи с выходом Proxmox 7.2 и с новой версией загрузчика Tinycore-redpill v0.8 инструкция немного устарела и требует дополнений. Но первый пост заблокирован и не получается по-быстрому внести исправления. Если найду время постараюсь сделать новую тему с новой инструкцией. Edited August 22, 2022 by Joyz Quote Link to comment Share on other sites More sharing options...
brsk Posted October 5, 2022 Share #106 Posted October 5, 2022 В 22.08.2022 в 07:26, Joyz сказал: Основная проблема нового загрузчика это, что теперь надо добавлять руками драйвер для сетевых карт virtio/e1000/rt8139 которые эмулируются в proxmox. Кто-то добавляет еще драйвер acpid, но у меня и без него все работает. В связи с выходом Proxmox 7.2 и с новой версией загрузчика Tinycore-redpill v0.8 инструкция немного устарела и требует дополнений. Но первый пост заблокирован и не получается по-быстрому внести исправления. Если найду время постараюсь сделать новую тему с новой инструкцией. Привет, подскажи как сейчас актуально установить, не могу найти инф Quote Link to comment Share on other sites More sharing options...
Bootuz Dinsmontuz Posted October 14, 2022 Share #107 Posted October 14, 2022 Получилось на минипк на Celeron n5105 вот таким образом. # set vm id id=900 # create disk for sata0 pvesm alloc local-lvm ${id} vm-${id}-disk-0 20G # create image directory, download and uncomporess mkdir -p /var/lib/vz/images/${id} curl --location https://github.com/pocopico/tinycore-redpill/releases/download/v0.9.2.7/tinycore-redpill.v0.9.2.7.img.gz --output /var/lib/vz/images/${id}/tinycore-redpill.v0.9.2.7.img.gz gzip --decompress /var/lib/vz/images/${id}/tinycore-redpill.v0.9.2.7.img.gz --keep # create vm qm create ${id} \ --args "-drive 'if=none,id=synoboot,format=raw,file=/var/lib/vz/images/${id}/tinycore-redpill.v0.9.2.7.img' -device 'qemu-xhci,addr=0x18' -device 'usb-storage,drive=synoboot,bootindex=5'" \ --cores 1 \ --cpu host \ --machine q35 \ --memory 2048 \ --name xpenology \ --net0 e1000,bridge=vmbr0 \ --numa 0 \ --onboot 0 \ --ostype l26 \ --scsihw virtio-scsi-pci \ --sata0 local-lvm:vm-${id}-disk-0,discard=on,size=20G,ssd=1 \ --sockets 1 \ --serial0 socket \ --serial1 socket \ --tablet 1 Необязательно к выполнению: ./rploader.sh update now ./rploader.sh satamap now Обязательно к выполнению. ./rploader.sh identifyusb now ./rploader.sh serialgen DS3622xs+ ./rploader.sh build broadwellnk-7.1.1-42962 НЕ ЗАБУДЬТЕ ПЕРЕД ЗАПУСКОМ ДОБАВИТЬ ДИСКОВОЕ ПРОСТРАНСТВО! Quote Link to comment Share on other sites More sharing options...
Bootuz Dinsmontuz Posted October 14, 2022 Share #108 Posted October 14, 2022 Ну и вдогонку видос установки. Спасибо автору топика за наводку. Quote Link to comment Share on other sites More sharing options...
mahasuk Posted October 18, 2022 Share #109 Posted October 18, 2022 В 14.10.2022 в 19:39, Bootuz Dinsmontuz сказал: Получилось на минипк на Celeron n5105 вот таким образом. # set vm id id=900 # create disk for sata0 pvesm alloc local-lvm ${id} vm-${id}-disk-0 20G # create image directory, download and uncomporess mkdir -p /var/lib/vz/images/${id} curl --location https://github.com/pocopico/tinycore-redpill/releases/download/v0.9.2.7/tinycore-redpill.v0.9.2.7.img.gz --output /var/lib/vz/images/${id}/tinycore-redpill.v0.9.2.7.img.gz gzip --decompress /var/lib/vz/images/${id}/tinycore-redpill.v0.9.2.7.img.gz --keep # create vm qm create ${id} \ --args "-drive 'if=none,id=synoboot,format=raw,file=/var/lib/vz/images/${id}/tinycore-redpill.v0.9.2.7.img' -device 'qemu-xhci,addr=0x18' -device 'usb-storage,drive=synoboot,bootindex=5'" \ --cores 1 \ --cpu host \ --machine q35 \ --memory 2048 \ --name xpenology \ --net0 e1000,bridge=vmbr0 \ --numa 0 \ --onboot 0 \ --ostype l26 \ --scsihw virtio-scsi-pci \ --sata0 local-lvm:vm-${id}-disk-0,discard=on,size=20G,ssd=1 \ --sockets 1 \ --serial0 socket \ --serial1 socket \ --tablet 1 Необязательно к выполнению: ./rploader.sh update now ./rploader.sh satamap now Обязательно к выполнению. ./rploader.sh identifyusb now ./rploader.sh serialgen DS3622xs+ ./rploader.sh build broadwellnk-7.1.1-42962 НЕ ЗАБУДЬТЕ ПЕРЕД ЗАПУСКОМ ДОБАВИТЬ ДИСКОВОЕ ПРОСТРАНСТВО! Пытаюсь сделать по вашему скрипту, но у меня есть только диск local, a local-lvm я удалил, и перенес пространство в local. И когда запускаю скрипт, у меня ошибка: unable to parse volume filename 'vm-101-disk-0' И не могу понять в чем проблема, почему оно не может создать диск. папку с ИД созадет (101) скачивает туда редпил, распаковывает его. Но виртуалка так и не создается, из за ошибки: unable to parse volume filename 'vm-101-disk-0' Quote Link to comment Share on other sites More sharing options...
CryoFast Posted October 20, 2022 Share #110 Posted October 20, 2022 В 18.10.2022 в 21:01, mahasuk сказал: Пытаюсь сделать по вашему скрипту, но у меня есть только диск local, a local-lvm я удалил, и перенес пространство в local. Ну так поменяйте local-lvm на local Делов-то Quote Link to comment Share on other sites More sharing options...
Guest Posted October 21, 2022 Share #111 Posted October 21, 2022 В 19.08.2022 в 11:32, sandercube сказал: А может кто сталкивался с тем, что скорость чтения/записи на прокинутый физический диск в вирт.машину dsm очень низкая 60 мбайт/c (запись) 100 мбайт/c (чтение), по сравнению с заявленными производителем харда. Может не хватает какого то драйвера? Либо в самом Proxmox драйвера не хватает? Либо это в принципе какое то ограничение виртуализации Proxmox? Кто с таким сталкивался? Прошу помощи, совета в какую сторону гуглить? Мучаюсь с такой же проблемой. По проводу HDD->Ноут получаю 150мбит+. Через xpenology(Proxmox, все по локалке) получаю 105 с падениями до 2-3. В итоге о нормальной передаче файлов можно забыть. Не решили проблему? Диск форматировал через ProxMox в LVM, пробросил в виртуалку и там уже отформатировал в формат synology рекомендуемый Quote Link to comment Share on other sites More sharing options...
mahasuk Posted October 22, 2022 Share #112 Posted October 22, 2022 В 20.10.2022 в 17:49, CryoFast сказал: Ну так поменяйте local-lvm на local Делов-то Да не, фиг там) Я не на столько тупой) Решилось все тем, что в команде "pvesm alloc local-lvm ${id} vm-${id}-disk-0 20G", надо было добавить .raw к имени диска. Да и кстати, не знаю зачем там создавать диск при создании вм) Я все сделал без диска, пробросил уже целый жесткий диск когда запустился загрузчик. Зачем там отросток в 20 гб, не понимаю) Quote Link to comment Share on other sites More sharing options...
SergNik Posted October 23, 2022 Share #113 Posted October 23, 2022 Коллеги, добрый день Все делаю по инструкции, но получаю ошибку Лог выполнения: tc@box:~$ ./rploader.sh build apollolake-7.0.1-42218 static bspatch does not exist, bringing over from repo % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 10232 100 10232 0 0 32482 0 --:--:-- --:--:-- --:--:-- 32482 Rploader Version : 0.9.2.7 Loader source : https://github.com/pocopico/redpill-load.git Loader Branch : develop Redpill module source : https://github.com/pocopico/redpill-lkm.git : Redpill module branch : master Extensions : redpill-misc Extensions URL : "https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/rpext-index.json" TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.apollolake-7.0.dev.txz/download TOOLKIT_SHA : d349fa644392d4cfab8191243ee38aaa32bd517208c144678e0c855cb5a619ea SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology%20NAS%20GPL%20Source/25426branch/apollolake-source/linux-4.4.x.txz/download SYNOKERNEL_SHA : af815ee065775d2e569fd7176e25c8ba7ee17a03361557975c8e5a4b64230c5b COMPILE_METHOD : toolkit_dev TARGET_PLATFORM : apollolake TARGET_VERSION : 7.0.1 TARGET_REVISION : 42218 REDPILL_LKM_MAKE_TARGET : test-v7 KERNEL_MAJOR : 4 MODULE_ALIAS_FILE : modules.alias.4.json SYNOMODEL : ds918p_42218 MODEL : DS918+ Local Cache Folder : /mnt/sdb3/auxfiles DATE Internet : 23102022 Local : 23102022 Checking Internet Access -> OK Checking if a newer version exists on the main repo -> Found newversion : 0.9.2.9 Current version : 0.9.2.7 There is a newer version of the script on the repo should we use that ? [yY/nN]n Cloning into 'redpill-lkm'... remote: Enumerating objects: 1398, done. remote: Counting objects: 100% (470/470), done. remote: Compressing objects: 100% (127/127), done. remote: Total 1398 (delta 360), reused 399 (delta 330), pack-reused 928 Receiving objects: 100% (1398/1398), 2.63 MiB | 6.53 MiB/s, done. Resolving deltas: 100% (923/923), done. Cloning into 'redpill-load'... remote: Enumerating objects: 2835, done. remote: Counting objects: 100% (319/319), done. remote: Compressing objects: 100% (160/160), done. remote: Total 2835 (delta 162), reused 297 (delta 150), pack-reused 2516 Receiving objects: 100% (2835/2835), 118.30 MiB | 11.07 MiB/s, done. Resolving deltas: 100% (1387/1387), done. No extra build option or static specified, using default <static> Using static compiled redpill extension Removing any old redpill.ko modules Looking for redpill for : ds918p_42218 Getting file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpillprod/releases/redpill-4.4.180plus.tgz Extracting module Getting file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpillprod/src/check-redpill.sh Got redpill-linux-v4.4.180+.ko Testing modules.alias.4.json -> File OK ------------------------------------------------------------------------------------------------ It looks that you will need the following modules : Found VGA Controller : pciid 1234d00001111 Required Extension : bochs_drm bochs_drm Searching for matching extension for bochs_drm Found SATA Controller : pciid 8086d00002922 Required Extension : ahci Searching for matching extension for ahci Found SATA Controller : pciid 8086d00002922 Required Extension : ahci Searching for matching extension for ahci [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_e xt_index.tmp_json ######################################################################## 100.0% [OK] [#] ========================================== pocopico.e1000 ========================================== [#] Extension name: e1000 [#] Description: Adds Intel(R) PRO/1000 Network Driver Support [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/e1000 [#] Software author: https://github.com/pocopico [#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000/rpext-index.json [#] Platforms supported: ds1621p_42218 ds1621p_42951 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 dva3221_42962 ds918p_42661 ds3622x sp_42962 ds3617xs_42951 dva1622_42218 dva1622_42621 ds920p_42962 ds1621p_42661 dva1622_42951 ds918p_25556 dva3221_42218 ds3615xs_42661 dva3221_42951 ds3622xs p_42661 ds2422p_42661 ds3622xsp_42218 ds2422p_42962 rs4021xsp_42621 dva1622_42962 ds2422p_42218 rs4021xsp_42962 dva3221_42621 ds3615xs_42962 ds3617xs_42962 d s3615xs_41222 ds920p_42951 rs4021xsp_42218 ds2422p_42951 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 rs4021xsp_42951 ds920p_42621 ds918p_42962 ds 3615xs_42951 ds3622xsp_42951 dva1622_42661 ds918p_42218 ds2422p_42621 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds1621p_42962 ds3622xsp_42621 rs4021xsp_426 61 [#] ======================================================================================= Found Ethernet Interface : pciid 8086d0000100e Required Extension : e1000 Searching for matching extension for e1000 Found matching extension : "https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000/rpext-index.json" ------------------------------------------------------------------------------------------------ Starting loader creation Found tinycore cache folder, linking to home/tc/custom-module Checking user_config.json : Done Entering redpill-load directory Removing bundled exts directories Cache directory OK cp: cannot stat '/home/tc/custom-module/*42218*.pat': No such file or directory Processing add_extensions entries found on custom_config.json file : redpill-misc Adding extension "https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/rpext-index.json" [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/rpext-index.json... [#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/rpext-index.json to /home/tc/redpill-load/custom/extensions/_ne w_ext_index.tmp_json ###################################################################################################################################################### 100.0% [OK] [#] ========================================== redpill-misc ========================================== [#] Extension name: Misc shell [#] Description: Misc shell [#] To get help visit: https://github.com/pocopico/redpill-load/raw/develop/redpill-misc [#] Extension preparer/packer: https://github.com/pocopico/redpill-load/raw/develop/redpill-misc [#] Software author: https://github.com/pocopico/redpill-load/raw/develop/redpill-misc [#] Update URL: https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/rpext-index.json [#] Platforms supported: ds1621p_42218 ds1621p_42951 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 dva3221_42962 ds918p_42661 ds3622x sp_42962 ds3617xs_42951 ds920p_42962 ds1621p_42661 dva1622_42951 ds918p_25556 dva3221_42218 ds3615xs_42661 dva3221_42951 ds3622xsp_42661 ds2422p_42661 ds3622 xsp_42218 ds2422p_42962 rs4021xsp_42621 dva1622_42962 ds2422p_42218 rs4021xsp_42962 dva3221_42621 ds3615xs_42962 ds3617xs_42962 ds3615xs_41222 ds920p_42951 r s4021xsp_42218 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 rs4021xsp_42951 ds920p_42621 ds918p_42962 ds3615xs_42951 ds3622xsp_42951 dva1622_42661 ds918p_42218 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds1621p_42962 ds3622xsp_42621 rs4021xsp_42661 [#] ======================================================================================= Updating extension : redpill-misc contents for model : ds918p_42218 [#] Checking runtime for required tools... [OK] [#] Updating ds918p_42218 platforms extensions... [#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/recipes/universal.json to /home/tc/redpill-load/custom/extensio ns/_ext_new_rcp.tmp_json ###################################################################################################################################################### 100.0% [#] Filling-in newly downloaded recipe for extension redpill-misc platform ds918p_42218 [#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/releases/install.sh to /home/tc/redpill-load/custom/extensions/ redpill-misc/ds918p_42218/install.sh ###################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42218/install.sh file... [OK] [#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/releases/install-all.sh to /home/tc/redpill-load/custom/extensi ons/redpill-misc/ds918p_42218/install-all.sh ###################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42218/install-all.sh file... [OK] [#] Downloading remote file https://github.com/tsl0922/ttyd/releases/download/1.6.3/ttyd.x86_64 to /home/tc/redpill-load/custom/extensions/redpill-misc/ds918 p_42218/ttyd ###################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42218/ttyd file... [OK] [#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/releases/install_rd.sh to /home/tc/redpill-load/custom/extensio ns/redpill-misc/ds918p_42218/install_rd.sh ###################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42218/install_rd.sh file... [OK] [#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/releases/lrzsz.tar.gz to /home/tc/redpill-load/custom/extension s/redpill-misc/ds918p_42218/lrzsz.tar.gz ###################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42218/lrzsz.tar.gz file... [OK] [#] Unpacking files from /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42218/lrzsz.tar.gz to /home/tc/redpill-load/custom/extensions/redpill-mi sc/ds918p_42218/... [OK] [#] Successfully processed recipe for extension redpill-misc platform ds918p_42218 [#] Unpacking files from /home/tc/redpill-load/custom/extensions/redpill-misc/ds918p_42218/lrzsz.tar.gz to /home/tc/redpill-load/custom/extensions/redpill-mi sc/ds918p_42218/... [OK] [#] Checking runtime for required tools... [OK] [#] Updating extensions... [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://github.com/pocopico/rp-ext/raw/main/redpill-boot-wait/rpext-index.json... [#] Downloading remote file https://github.com/pocopico/rp-ext/raw/main/redpill-boot-wait/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ex t_index.tmp_json ###################################################################################################################################################### 100.0% [OK] [#] ========================================== redpill-boot-wait ========================================== [#] Extension name: RedPill Bootwait [#] Description: Simple extension which stops the execution early waiting for the boot device to appear [#] To get help visit: https://github.com/pocopico/rp-ext/redpill-boot-wait [#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/redpill-boot-wait [#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill-boot-wait/rpext-index.json [#] Platforms supported: ds1621p_42218 ds1621p_42951 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 dva3221_42962 ds918p_42661 ds3622x sp_42962 ds3617xs_42951 ds920p_42962 ds1621p_42661 dva1622_42951 ds918p_25556 dva3221_42218 ds3615xs_42661 dva3221_42951 ds3622xsp_42661 ds2422p_42661 ds3622 xsp_42218 ds2422p_42962 rs4021xsp_42621 dva1622_42962 ds2422p_42218 rs4021xsp_42962 dva3221_42621 ds3615xs_42962 ds3617xs_42962 ds3615xs_41222 ds920p_42951 r s4021xsp_42218 ds2422p_42951 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 rs4021xsp_42951 ds920p_42621 ds918p_42962 ds3615xs_42951 ds3622xsp_42951 ds920p_42550 dva1622_42661 ds918p_42218 ds2422p_42621 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds1621p_42962 ds3622xsp_42621 rs4021xsp_42661 [#] ======================================================================================= [#] Checking runtime for required tools... [OK] [#] Updating pocopico.e1000 extension... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_e xt_index.tmp_json ###################################################################################################################################################### 100.0% [#] Extension pocopico.e1000 index is already up to date [#] Updating redpill-boot-wait extension... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill-boot-wait/rpext-index.json to /home/tc/redpill-load/custom/exten sions/_new_ext_index.tmp_json ###################################################################################################################################################### 100.0% [#] Extension redpill-boot-wait index is already up to date [#] Updating redpill-misc extension... [#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/rpext-index.json to /home/tc/redpill-load/custom/extensions/_ne w_ext_index.tmp_json ###################################################################################################################################################### 100.0% [#] Extension redpill-misc index is already up to date [#] Updating redpill-misc extension... [OK] [#] Checking runtime for required tools... [OK] [#] Updating ds918p_42218 platforms extensions... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000/releases/ds918p_42218.json to /home/tc/redpill-load/custom/extensi ons/_ext_new_rcp.tmp_json ###################################################################################################################################################### 100.0% [#] Filling-in newly downloaded recipe for extension pocopico.e1000 platform ds918p_42218 [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000/releases/e1000-4.4.180plus.tgz to /home/tc/redpill-load/custom/ext ensions/pocopico.e1000/ds918p_42218/e1000-4.4.180plus.tgz ###################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.e1000/ds918p_42218/e1000-4.4.180plus.tgz file... [OK] [#] Unpacking files from /home/tc/redpill-load/custom/extensions/pocopico.e1000/ds918p_42218/e1000-4.4.180plus.tgz to /home/tc/redpill-load/custom/extensions /pocopico.e1000/ds918p_42218/... [OK] [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/e1000/src/check-e1000.sh to /home/tc/redpill-load/custom/extensions/poco pico.e1000/ds918p_42218/check-e1000.sh ###################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.e1000/ds918p_42218/check-e1000.sh file... [OK] [#] Successfully processed recipe for extension pocopico.e1000 platform ds918p_42218 [#] Downloading remote file https://github.com/RedPill-TTG/redpill-boot-wait/raw/master/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ex t_new_rcp.tmp_json ###################################################################################################################################################### 100.0% [#] Filling-in newly downloaded recipe for extension redpill-boot-wait platform ds918p_42218 [#] Downloading remote file https://raw.githubusercontent.com/RedPill-TTG/redpill-boot-wait/master/src/boot-wait.sh to /home/tc/redpill-load/custom/extension s/redpill-boot-wait/ds918p_42218/boot-wait.sh ###################################################################################################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/redpill-boot-wait/ds918p_42218/boot-wait.sh file... [OK] [#] Successfully processed recipe for extension redpill-boot-wait platform ds918p_42218 [#] Downloading remote file https://github.com/pocopico/redpill-load/raw/develop/redpill-misc/recipes/universal.json to /home/tc/redpill-load/custom/extensio ns/_ext_new_rcp.tmp_json ###################################################################################################################################################### 100.0% [#] Extension redpill-misc for ds918p_42218 platform is already up to date [#] Verifying /home/tc/redpill-load/custom/extensions/redpill-boot-wait/ds918p_42218/boot-wait.sh file... [OK] [#] Updating extensions... [OK] [#] PAT file /home/tc/redpill-load/cache/ds918p_42218.pat not found - downloading from https://global.download.synology.com/download/DSM/release/7.0.1/42218/ DSM_DS918%2B_42218.pat % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 338M 100 338M 0 0 10.8M 0 0:00:31 0:00:31 --:--:-- 11.0M [#] Verifying /home/tc/redpill-load/cache/ds918p_42218.pat file... [OK] [#] Unpacking /home/tc/redpill-load/cache/ds918p_42218.pat file to /home/tc/redpill-load/build/1666514791/pat-ds918p_42218-unpacked... [OK] [#] Verifying /home/tc/redpill-load/build/1666514791/pat-ds918p_42218-unpacked/zImage file... [OK] [#] Patching /home/tc/redpill-load/build/1666514791/pat-ds918p_42218-unpacked/zImage to /home/tc/redpill-load/build/1666514791/zImage-patched... [OK] [#] Verifying /home/tc/redpill-load/build/1666514791/pat-ds918p_42218-unpacked/rd.gz file... [OK] [#] Unpacking /home/tc/redpill-load/build/1666514791/pat-ds918p_42218-unpacked/rd.gz file to /home/tc/redpill-load/build/1666514791/rd-ds918p_42218-unpacked. .. [OK] [#] Apply patches to /home/tc/redpill-load/build/1666514791/rd-ds918p_42218-unpacked... [!] One of the patches - /home/tc/redpill-load/config/_common/ramdisk-005-disable-disabled-ports.patch - failed to apply Hmm... Looks like a unified diff to me... The text leading up to this was: -------------------------- |--- a/usr/syno/web/webman/get_state.cgi |+++ b/usr/syno/web/webman/get_state.cgi -------------------------- patching file usr/syno/web/webman/get_state.cgi Using Plan A... Hunk #1 FAILED at 1. 1 out of 1 hunk FAILED -- saving rejects to file usr/syno/web/webman/get_state.cgi.rej done *** Process will exit *** FAILED : Loader creation failed check the output for any errors Уже раз 20 пытался. Что я делаю не так??? Quote Link to comment Share on other sites More sharing options...
Joyz Posted October 24, 2022 Author Share #114 Posted October 24, 2022 В 22.10.2022 в 21:06, mahasuk сказал: Да не, фиг там) Я не на столько тупой) Решилось все тем, что в команде "pvesm alloc local-lvm ${id} vm-${id}-disk-0 20G", надо было добавить .raw к имени диска. Да и кстати, не знаю зачем там создавать диск при создании вм) Я все сделал без диска, пробросил уже целый жесткий диск когда запустился загрузчик. Зачем там отросток в 20 гб, не понимаю) Если создавать диск 25GB и более, то спокойно можно будет им пользоваться. Ну или сразу пробрасывать нужный физический диск. Quote Link to comment Share on other sites More sharing options...
Joyz Posted October 24, 2022 Author Share #115 Posted October 24, 2022 В 23.10.2022 в 11:51, SergNik сказал: Уже раз 20 пытался. Что я делаю не так??? А зачем такую старую версию DSM хотите использовать ? Quote Link to comment Share on other sites More sharing options...
SergNik Posted October 25, 2022 Share #116 Posted October 25, 2022 18 часов назад, Joyz сказал: А зачем такую старую версию DSM хотите использовать ? У вас в примере была эта. Ладно, попробую другую Quote Link to comment Share on other sites More sharing options...
SergNik Posted October 25, 2022 Share #117 Posted October 25, 2022 29 минут назад, SergNik сказал: У вас в примере была эта. Ладно, попробую другую Спасибо, все получилось! Огромное спасибо! Quote Link to comment Share on other sites More sharing options...
sandercube Posted October 29, 2022 Share #118 Posted October 29, 2022 В 21.10.2022 в 23:31, spatiumstas сказал: Мучаюсь с такой же проблемой. По проводу HDD->Ноут получаю 150мбит+. Через xpenology(Proxmox, все по локалке) получаю 105 с падениями до 2-3. В итоге о нормальной передаче файлов можно забыть. Не решили проблему? Диск форматировал через ProxMox в LVM, пробросил в виртуалку и там уже отформатировал в формат synology рекомендуемый Решение до сих пор не нашёл, уже перекопал куча забугорских форумов - безрезультатно. Пока мучаюсь так... Quote Link to comment Share on other sites More sharing options...
Joyz Posted October 29, 2022 Author Share #119 Posted October 29, 2022 (edited) 1 час назад, sandercube сказал: Решение до сих пор не нашёл, уже перекопал куча забугорских форумов - безрезультатно. У меня стабильно передаются файлы Попробуйте создать любую виртуальную машину/контейнер и проверить скорость там. А так же, как передаются файлы в сам proxmox. А зачем форматировать в Proxmox в LVM чтобы пробросить диск? Edited October 29, 2022 by Joyz Quote Link to comment Share on other sites More sharing options...
Elektronik Posted November 27, 2022 Share #120 Posted November 27, 2022 Помогите пожалуйста, что не так делаю. Ставлю на стационарный комп. Все идет как на видео до выполнения 3-й команды (./rploader.sh build broadwellnk-7.1.1-42962). Ругается на отсуствие платформы rploader.sh . Странно две первые команды на этой платформе выполняет. Я очень сильно новичок. Не пинайте. Думаю что дело в скрипте. Подскажите что не так. Скрытый текст login as: tc tc@192.168.1.63's password: ( '>') /) TC (\ Core is distributed with ABSOLUTELY NO WARRANTY. (/-_--_-\) www.tinycorelinux.net tc@box:~$ ./rploader.sh identifyusb now Machine is VIRTUAL Hypervisor=KVM Found QEMU QEMU SerialNumber: 1-0000:00:18.0-1 Vendor ID : 0x46f4 Product ID : 0x0001 Should i update the user_config.json with these values ? [Yy/Nn] y tc@box:~$ ./rploader.sh serialgen DS3622xs+ Serial Number for Model = 2040SQRX3J86P Mac Address for Model DS3622xs+ = 00:11:32:7E:D8:BF Should i update the user_config.json with these values ? [Yy/Nn] y tc@box:~$ ./rploader.sh build broadwellnk-7.1.1-42962 bspatch does not exist, bringing over from repo % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 10232 100 10232 0 0 19639 0 --:--:-- --:--:-- --:--:-- 19639 Error : Platform not found rploader.sh Version : 0.9.3.0 -------------------------------------------------------------------------------- -------- Usage: ./rploader.sh <action> <platform version> <static or compile module> [ext ension manager arguments] Actions: build, ext, download, clean, update, listmod, serialgen, identifyusb, p atchdtc, satamap, backup, backuploader, restoreloader, restoresession, mountdsmroot, post update, mountshare, version, monitor, bringfriend, downloadupgradepat, help - build <platform> <option> : Build the 💊 RedPill LKM and update the loader image for the specified platfor m version and update current loader. Valid Options: static/compile/manual/junmod/withfriend ** withfriend add the TCRP friend and a boot option for auto patching - ext <platform> <option> <URL> Manage extensions using redpill extension manager. Valid Options: add/force_add/info/remove/update/cleanup/auto . Options after platform Example: rploader.sh ext apollolake-7.0.1-42218 add https://raw.githubusercontent.com/p ocopico/rp-ext/master/e1000/rpext-index.json or for auto detect use rploader.sh ext apollolake-7.0.1-42218 auto - download <platform> : Download redpill sources only - clean : Removes all cached and downloaded files and starts over clean - update : Checks github repo for latest version of rploader, and prompts you download an d overwrite - fullupgrade : Performs a full upgrade of the local files to the latest available on the repo . It will backup the current filed under /home/tc/old - listmods <platform>: Tries to figure out any required extensions. This usually are device modules - serialgen <synomodel> <option> : Generates a serial number and mac address for the following platforms DS3615xs DS3617xs DS916+ DS918+ DS920+ DS3622xs+ FS6400 DVA3219 DVA3221 DS1621 + DVA1622 DS2422+ RS4021xs+ Valid Options : realmac , keeps the real mac of interface eth0 - identifyusb : Tries to identify your loader usb stick VID:PID and updates the user_config.js on file - patchdtc : Tries to identify and patch your dtc model for your disk and nvme devices. If you want to have your manually edited dts file used convert it to dtb and place it under /home/ tc/custom-modules - satamap : Tries to identify your SataPortMap and DiskIdxMap values and updates the user_ config.json file - backup : Backup and make changes /home/tc changed permanent to your loader disk. Next t ime you boot, your /home will be restored to the current state. - backuploader : Backup current loader partitions to your TCRP partition - restoreloader : Restore current loader partitions from your TCRP partition - restoresession : Restore last user session files. (extensions and user_config.json) - mountdsmroot : Mount DSM root for manual intervention on DSM root partition - postupdate : Runs a postupdate process to recreate your rd.gz, zImage and custom.gz for jun ior to match root - mountshare : Mounts a remote CIFS working directory - version <option>: Prints rploader version and if the history option is passed then the version h istory is listed. Valid Options : history, shows rploader release history. - monitor : Prints system statistics related to TCRP loader - getgrubconf : Checks your user_config.json file variables against current grub.cfg variables and updates your user_config.json accordingly - bringfriend Downloads TCRP friend and makes it the default boot option. TCRP Friend is her e to assist with automated patching after an upgrade. No postupgrade actions will be required a nymore, if TCRP friend is left as the default boot option. - downloadupgradepat Downloads a specific upgade pat that can be used for various troubleshooting p urposes - removefriend Reverse bringfriend actions and remove TCRP from your loader - help: Show this page -------------------------------------------------------------------------------- -------- Version : 0.9.3.0 tc@box:~$ Quote Link to comment Share on other sites More sharing options...
sergey1492 Posted December 4, 2022 Share #121 Posted December 4, 2022 Столкнулся с такой же проблемой помогла команда ./rploader.sh build ds3622xsp-7.1.1-42962 1 Quote Link to comment Share on other sites More sharing options...
Doomxtut Posted December 5, 2022 Share #122 Posted December 5, 2022 В 27.11.2022 в 22:56, Elektronik сказал: Помогите пожалуйста, что не так делаю. Ставлю на стационарный комп. Все идет как на видео до выполнения 3-й команды (./rploader.sh build broadwellnk-7.1.1-42962). Ругается на отсуствие платформы rploader.sh . Странно две первые команды на этой платформе выполняет. Я очень сильно новичок. Не пинайте. Думаю что дело в скрипте. Подскажите что не так. Ругается после третьей команды (Показать содержимое) login as: tc tc@192.168.1.63's password: ( '>') /) TC (\ Core is distributed with ABSOLUTELY NO WARRANTY. (/-_--_-\) www.tinycorelinux.net tc@box:~$ ./rploader.sh identifyusb now Machine is VIRTUAL Hypervisor=KVM Found QEMU QEMU SerialNumber: 1-0000:00:18.0-1 Vendor ID : 0x46f4 Product ID : 0x0001 Should i update the user_config.json with these values ? [Yy/Nn] y tc@box:~$ ./rploader.sh serialgen DS3622xs+ Serial Number for Model = 2040SQRX3J86P Mac Address for Model DS3622xs+ = 00:11:32:7E:D8:BF Should i update the user_config.json with these values ? [Yy/Nn] y tc@box:~$ ./rploader.sh build broadwellnk-7.1.1-42962 bspatch does not exist, bringing over from repo % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 10232 100 10232 0 0 19639 0 --:--:-- --:--:-- --:--:-- 19639 Error : Platform not found rploader.sh Version : 0.9.3.0 -------------------------------------------------------------------------------- -------- Usage: ./rploader.sh <action> <platform version> <static or compile module> [ext ension manager arguments] Actions: build, ext, download, clean, update, listmod, serialgen, identifyusb, p atchdtc, satamap, backup, backuploader, restoreloader, restoresession, mountdsmroot, post update, mountshare, version, monitor, bringfriend, downloadupgradepat, help - build <platform> <option> : Build the 💊 RedPill LKM and update the loader image for the specified platfor m version and update current loader. Valid Options: static/compile/manual/junmod/withfriend ** withfriend add the TCRP friend and a boot option for auto patching - ext <platform> <option> <URL> Manage extensions using redpill extension manager. Valid Options: add/force_add/info/remove/update/cleanup/auto . Options after platform Example: rploader.sh ext apollolake-7.0.1-42218 add https://raw.githubusercontent.com/p ocopico/rp-ext/master/e1000/rpext-index.json or for auto detect use rploader.sh ext apollolake-7.0.1-42218 auto - download <platform> : Download redpill sources only - clean : Removes all cached and downloaded files and starts over clean - update : Checks github repo for latest version of rploader, and prompts you download an d overwrite - fullupgrade : Performs a full upgrade of the local files to the latest available on the repo . It will backup the current filed under /home/tc/old - listmods <platform>: Tries to figure out any required extensions. This usually are device modules - serialgen <synomodel> <option> : Generates a serial number and mac address for the following platforms DS3615xs DS3617xs DS916+ DS918+ DS920+ DS3622xs+ FS6400 DVA3219 DVA3221 DS1621 + DVA1622 DS2422+ RS4021xs+ Valid Options : realmac , keeps the real mac of interface eth0 - identifyusb : Tries to identify your loader usb stick VID:PID and updates the user_config.js on file - patchdtc : Tries to identify and patch your dtc model for your disk and nvme devices. If you want to have your manually edited dts file used convert it to dtb and place it under /home/ tc/custom-modules - satamap : Tries to identify your SataPortMap and DiskIdxMap values and updates the user_ config.json file - backup : Backup and make changes /home/tc changed permanent to your loader disk. Next t ime you boot, your /home will be restored to the current state. - backuploader : Backup current loader partitions to your TCRP partition - restoreloader : Restore current loader partitions from your TCRP partition - restoresession : Restore last user session files. (extensions and user_config.json) - mountdsmroot : Mount DSM root for manual intervention on DSM root partition - postupdate : Runs a postupdate process to recreate your rd.gz, zImage and custom.gz for jun ior to match root - mountshare : Mounts a remote CIFS working directory - version <option>: Prints rploader version and if the history option is passed then the version h istory is listed. Valid Options : history, shows rploader release history. - monitor : Prints system statistics related to TCRP loader - getgrubconf : Checks your user_config.json file variables against current grub.cfg variables and updates your user_config.json accordingly - bringfriend Downloads TCRP friend and makes it the default boot option. TCRP Friend is her e to assist with automated patching after an upgrade. No postupgrade actions will be required a nymore, if TCRP friend is left as the default boot option. - downloadupgradepat Downloads a specific upgade pat that can be used for various troubleshooting p urposes - removefriend Reverse bringfriend actions and remove TCRP from your loader - help: Show this page -------------------------------------------------------------------------------- -------- Version : 0.9.3.0 tc@box:~$ Изменился загрузчик. Посмотреть варианты можно используя команду ./rploader.sh -version Для примера. Было: ./rploader.sh build geminilake-7.1.0-42661 Стало: ./rploader.sh build ds920p-7.1.1-42962 1 Quote Link to comment Share on other sites More sharing options...
Elektronik Posted December 10, 2022 Share #123 Posted December 10, 2022 Спасибо огромное. Все подошло. Quote Link to comment Share on other sites More sharing options...
SergNik Posted December 17, 2022 Share #124 Posted December 17, 2022 Коллеги, добрый день Видимо, после очередных изменений есть проблемы с DSM Все сделал по инструкции Но если загружаю с USB - на консоли Proxmox просто тупо черный экран и ...усе А если загрузку делать в HDD- вижу ошибку Мне кажется, но драйвера USB не подгрузились. Можете мне пожалуйста подсказать что я опять делаю не так? Quote Link to comment Share on other sites More sharing options...
SergNik Posted December 17, 2022 Share #125 Posted December 17, 2022 выкладываю лог создания https://pastebin.com/VZH1dv7T Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.