skywalker
-
Posts
6 -
Joined
-
Last visited
Posts posted by skywalker
-
-
On 9/7/2022 at 2:10 PM, sbv3000 said:
not an expert on this but it might be your diskidxmap is not detected properly, this is a good description of the logic, (xlate from chinese)
http://www.gebi1.com/thread-301372-1-1.html I think your values might need to be something like 000608
Thanks for answer, it looks correct, changed diskidxmap, but anything changed... Will repost to main thread.
-
Hi everyone, can someone help me please?
I had Jun loader on dsm 6, and now I want to migrate to redpill 7.
So, I follow upgrade instructions, but SynologyAssistant show status "Not Installed" instead migratable.
Sata settings in grub I took from Jun, cause autodetect works wrong for me.
So I have motherboard with 6 sata + 2 sata on separate chip (Asmedia?) + HBA LSI with 4 ports.
All together 12 drives.
For this LSI autodetect show only 2 ports available.
And my settings worked from Jun:
SataPortMap=624
DiskIdxMap=0C
SasIdxMap=0
Installing DS918+ (was the same)
Tried different versions (7.0-7.1)
Thanks in advance.
-
to make clear, i've something like this:
APPEND root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3615xs sn=B845R4565 mac1=0011223344BBFF vid=0x0EA0 pid=0x2168 loglevel=0 vga=0x305
After mac1= you can add mac2= and so on.
Thanks, ill try
-
Strange...
i got it working. Changed the serial and mac address in syslinux.cfg
i've an original serial from an old ds109j
I don't have original serial, i tried to change for just numbers and letters? and its not working. and i don't know how to change mac address...
-
I have a problem too, after upgrade it was ok, but now, after reboot it looks like it doesn't mount hdds. When i login it shows me 2 information messages - synostoraged, synobackupd, hotplugd cannot run, and the system was shutdown improperly. What i have to try?....
TinyCore RedPill Loader (TCRP)
in Loaders
Posted · Edited by skywalker
Hi everyone, can someone help me please?
I had Jun loader on dsm 6, and now I want to migrate to redpill 7.
So, I follow upgrade instructions, but SynologyAssistant show status "Not Installed" instead migratable.
Sata settings in grub I took from Jun, cause autodetect works wrong for me.
So I have motherboard with 6 sata + 2 sata on separate chip (Asmedia?) + HBA LSI with 4 ports.
All together 12 drives.
For this LSI autodetect show only 2 ports available.
Settings:
SataPortMap=624
DiskIdxMap=000608
SasIdxMap=0
Installing DS918+ (was the same)
Tried different versions (7.0-7.1)
Thanks in advance.