DjMcM
-
Posts
7 -
Joined
-
Last visited
Posts posted by DjMcM
-
-
2 minutes ago, DSfuchs said:
For me, it reads excellently in Germany.
The DeepL translator helps me a lot.
-
1 minute ago, DSfuchs said:
I use this software to save/write a DOM image:
https://www.alexpage.de/download/usbit/usbit.zip
Option to be set for writing to DOM:
Thanks for your help in advance. (Sorry my poor English language!)
-
37 minutes ago, DSfuchs said:
First, it must be determined whether the DOM is working and, if so, whether files are missing or need to be overwritten. There is also an individual device file that enables the unique DSM license purchased with the device to be used. And of course it would be easier and quicker to flash your DOM backup if you had created it beforehand. But it is possible to reconstruct everything.
If you can still create an image of your DOM, I can happily check and repair it for you, If you don't have the opportunity to verify it yourself with a second Synology hardware.Unfortunately, it never occurred to me that such a mistake could be made. If I can, I'll make a backup of the DOM. Tomorrow I'll try to see if it works and what's on it. If I can get it to come back to life, I'll make an img file and send it over. Thanks a lot for your help!
- 1
-
Next post...
-
1 hour ago, DSfuchs said:
We just re-flashed the internal FLASH drive. A cable such as EAN: 4043718082452 is required.
If the hardware is defective, you can use a suitable USB stick for it that is plugged into the front socket.
Great! I was thinking the same thing. Do you happen to have a downloadable image file for ds412+ that can be written if the factory flash is completely dead? Can any usb stick be connected? Thanks!
-
On 4/19/2024 at 1:23 PM, Dionutzu said:
My Synology DS412+ is back online!!!
Manny thanks to DSfuchs, is the best!
💪🍻Dear Dionutzu!
Today, after a simple restart, the DS412+ did not restart, only the blue power button LED blinked. I disassembled the NAS, cleaned it up, replaced the basics, tested (RAM, power supply). I concluded that the FLASH drive may have failed. Can you summarize for me what you did to get the NAS to start again? Thank you!
DS412+ USB flash module pinout
in Hardware Modding
Posted · Edited by DjMcM
Hi DSfuchs.
I managed to download the DOM.
Can you give me an email address to send you the link to the DOM image file? Thanks!