Xeondile
-
Posts
2 -
Joined
-
Last visited
Posts posted by Xeondile
-
-
On 11/2/2023 at 9:07 PM, OopsDidYouReadThis said:
Hi,
I have a DS1512+ with bad usb dom too. I have taken it out and tried to connect it via serial usb to ttl, plugged in to my windows PC + mac, my computers cannot detect the dom at all. It's dead.
I need help, how does one who are in my situation, fix this syno boot issue without the image. Any image for ds1512+ available? (I know it may not be legal but it's only to fix my dead edom) :(Sorry a little bit late, but I had the same issue that the dom is not recognized because it hat an error and is running under usb 1.1 and the bios is not making it, so i but everything to a usb stick with hacking pid and vid and now its working again over usb.
I uploaded the image, but it has a fake SN (CBKAN99999), so you need to go on the second partition and edit the vendor file with a hex editor. put in your serial, the last diggit is the checksum of the serial.
can be calculated here: https://www.scadacore.com/tools/programming-calculators/online-checksum-calculator/
but in the serial in ASCII input and take the "CheckSum8 Modulo 256" in hex after the SN in vendor file
Image is here: https://filer.net/get/fgr73l4drvtvkxcj
It is from a original DS1512+ only changed vendor SN
Hope that will help someone out.
Flash transplant
in Hardware Modding
Posted
@Aetherone for the Chip you get the MPALL software from here: https://www.usbdev.ru/files/phison/mpall/
For me it was version 5.13.0C, so I get my one to run. Basic Settings with this small settings, see attachment