sten12341
-
Posts
9 -
Joined
-
Last visited
Posts posted by sten12341
-
-
Hi is there a acpid extension for Proxmox that works with the DS3622xs+?
I tried:
./rploader.sh ext ds3622xsp-7.1.1-42962 add https://raw.githubusercontent.com/jimmyGALLAND/redpill-ext/master/acpid/rpext-index.json (only working until 42961)
./rploader.sh ext ds3622xsp-7.1.1-42962 add https://raw.githubusercontent.com/dodo-dk/rp-ext/main/acpid/rpext-index.json (script not found or something,also only 42961)./rploader.sh ext ds3622xsp-7.1.1-42962 add https://github.com/pocopico/redpill-load/raw/develop/redpill-acpid/rpext-index.json (Proxmox can't shut down the VM)
And i ask myself what to do with 7.2....
Thank you
-
On 1/29/2023 at 12:35 PM, Keli said:
I had to enable SSH, log in and edit the file /etc/synoinfo.conf as root. Change the line 'eth0_wol_options="d" 'to 'eth0_wol_options="g" '. I now have the WOL option checked
Thank you, I really helped to get the WOL box checked 👍
ssh in Synology
sudo -i
vi /etc/synoinfo.conf
i for insert,
ESC to leave the edit mode
:wq! to write and quit
-
-
Hi this extension is working for me in Proxmox and on an old laptop
[DS918+]
./rploader.sh update now
./rploader.sh fullupgrade now
./rploader.sh serialgen DS918+
./rploader.sh identifyusb now
./rploader.sh satamap now
(Proxmox: WinSCP SATA to 4 and 00)
./rploader.sh ext ds918p-7.1.1-42962 add https://github.com/pocopico/redpill-load/raw/develop/redpill-acpid/rpext-index.json
./rploader.sh ext ds918p-7.1.1-42962 add https://raw.githubusercontent.com/pocopico/rp-ext/master/v9fs/rpext-index.json
./rploader.sh ext ds918p-7.1.1-42962 add https://raw.githubusercontent.com/pocopico/rp-ext/main/powersched/rpext-index.json
./rploader.sh build ds918p-7.1.1-42962
./rploader.sh clean now
sudo poweroff -
I just used this config, the shutdown over Proxmox is working
[DS918+]
./rploader.sh update now
./rploader.sh fullupgrade now
./rploader.sh serialgen DS918+
./rploader.sh identifyusb now
./rploader.sh satamap now
WinSCP: set SATA values to 4 and 00
./rploader.sh ext ds918p-7.1.1-42962 add https://github.com/pocopico/redpill-load/raw/develop/redpill-acpid/rpext-index.json
./rploader.sh ext ds918p-7.1.1-42962 add https://raw.githubusercontent.com/pocopico/rp-ext/master/v9fs/rpext-index.json
./rploader.sh build ds918p-7.1.1-42962
./rploader.sh clean now
sudo poweroff -
1 hour ago, Peter Suh said:
Are these specs for your Nuc ?
According to this specification, the SSD is not a regular SSD, but an M.2 SSD.
In case of NVMe, it only works as a cache.
Using the disk looks tough.Hi yes, only M.2 PCIe available and USB slots. And I thought it will make no difference when I was buying it...but now...
-
Hi I can't find discs on the Intel NUC BNUC11ATKC40002. Is only has a 1 PCIe SSD slot. There is also a SATA controller, but no SATA port.
I followed this guide for DS918+ and it works very well on an old laptop with SATA, but not on my new Intel NUC. Is there any chance to get it to run?
When I reach the web screen from Synology, I said no discs available.
Thank you
Redpill is asking to install again after months of use?
in General Questions
Posted
maybe you have to make the usb stick new