Jump to content
XPEnology Community

DARKGuy

Rookie
 View Profile  See their activity

  • Posts

    4

  • Joined

  • Last visited

 Content Type 

Posts posted by DARKGuy

    Automated RedPill Loader (ARPL)

    in Loaders

    Posted · Edited by DARKGuy
    I had to use images because the forum kept saying that the message was marked as spam because it contained contacts, which is a blatant lie. Somebody fix the forum pls.

    EDIT: SOLVED: It was a bad RAM, go figure.

     

    ---

     

    Hey, first of all thanks for developing ARPL!

     

    Long time lurker here so I don't know if this fits here, but I'm using ARPL so I guess it is. Anyways, I'm having a small issue copying files to my NAS, it stops for a while then continues and I decided to see the dmesg and found this:

     

    image.thumb.png.786674d205be57450525ea356a44e4c0.png

     

    And it repeats a lot and ends with this:

     

    image.thumb.png.cba0a167ce2236a86f01e3e3f6fae2b1.png

     

    Google doesn't help much either, so I'm not sure if it's an ARPL-related issue or BTRFS issue. Then again nothing shows up. 

     

    Anybody got any ideas? Thanks!

     

    Edit: I had to use images because the forum kept saying that the message was marked as spam because it contained contacts, which is a blatant lie. Somebody fix the forum pls.

    Automated RedPill Loader (ARPL)

    in Loaders

    Posted · Edited by DARKGuy

    33 minutes ago, Tone said:

     

    I'm running into the same problem but in my case I got the real mac address assign but immediately I boot the loader, the NAS is lost. No dhcp entry in the router, only when I enter again in the config loader...

     

    image.thumb.png.cba60206a4f2931680438df4cfe5d402.png

     

    I'm also getting the same here. Maybe that version is broken? Same happens with 0.6 so... :(

    Automated RedPill Loader (ARPL)

    in Loaders

    Posted · Edited by DARKGuy

    Hey everyone, first of all thanks @fbelavenuto for his great work!

     

    I'm wondering if I could get some bit of assistance, new adopter here :) I got this to work out-of-the-box in an HP 800 G1 MT machine all fine and dandy, yay! However things didn't turn out well on my side so I had to change hardware. I'm currently using a new machine (still 4th gen) most specifically a Z97 Gaming 3 motherboard which seems to have an Intel Killer Ethernet NIC.

     

    For some reason I'm unable to get it to boot at all regardless of the model I've used. Ping works while it's in ARPL. Once it boots to the kernel, it stops working.

     

    I also have some USB 3.0 LAN adapters (ASIX chip) but they don't seem to work at all either after kernel boot.

     

    Does anybody have any idea what can I do to get this to work? (I'm assuming my issue is the NIC... It could be anything else, but no idea what could it be? I disabled VT-x and C1E as I read around in another post, but it didn't seem to do anything).

     

    LSPCI output: 

    00:00.0 Host bridge: Intel Corporation 4th Gen Core Processor DRAM Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Generation Core Processor Family Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 9 Series Chipset Family USB xHCI Controller
00:16.0 Communication controller: Intel Corporation 9 Series Chipset Family ME Interface #1
00:1a.0 USB controller: Intel Corporation 9 Series Chipset Family USB EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 9 Series Chipset Family HD Audio Controller
00:1c.0 PCI bridge: Intel Corporation 9 Series Chipset Family PCI Express Root Port 1 (rev d0)
00:1c.2 PCI bridge: Intel Corporation 9 Series Chipset Family PCI Express Root Port 3 (rev d0)
00:1c.3 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d0)
00:1d.0 USB controller: Intel Corporation 9 Series Chipset Family USB EHCI Controller #1
00:1f.0 ISA bridge: Intel Corporation Z97 Chipset LPC Controller
00:1f.2 SATA controller: Intel Corporation 9 Series Chipset Family SATA Controller [AHCI Mode]
00:1f.3 SMBus: Intel Corporation 9 Series Chipset Family SMBus Controller
02:00.0 Ethernet controller: Qualcomm Atheros Killer E220x Gigabit Ethernet Controller (rev 13)
03:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 03)

     

    LSUSB output: 

    Bus 002 Device 002: ID 8087:8001 Intel Corp. Integrated Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8009 Intel Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 003: ID 0b95:1790 ASIX Electronics Corp. AX88179 Gigabit Ethernet
Bus 004 Device 002: ID 0b95:1790 ASIX Electronics Corp. AX88179 Gigabit Ethernet
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
Bus 003 Device 002: ID 0781:5567 SanDisk Corp. Cruzer Blade
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

     

    Thanks in advance!

×
×
  • Create New...