[Live TV recording setup with DBV-T2 device]

On 6/29/2018 at 5:39 PM, toker said:

 

I purchased Hauppauge WinTV DualHD (Model 1590)

http://www.hauppauge.co.uk/site/webstore/webstore_dualhd.html

No native support on DS3615xs - 6.1.7.15284

Tried Plex (x86 & x64) on DSM, tvheadend on DSM - no USB tuner detected

Docker Plex and Docker tvheadend - I could not get USB passthrough to work on Docker

 

lsusb

|__usb1          1d6b:0002:0310 09  2.00  480MBit/s 0mA 1IF  (ehci_hcd 0000:00:1a.0) hub
  |__1-1         8087:0024:0000 09  2.00  480MBit/s 0mA 1IF  ( ffffffd1ffffffb2ffffffdbffffffad) hub
|__usb2          1d6b:0002:0310 09  2.00  480MBit/s 0mA 1IF  (ehci_hcd 0000:00:1d.0) hub
  |__2-1         8087:0024:0000 09  2.00  480MBit/s 0mA 1IF  ( ffffffd1ffffffb2ffffffdbffffffa0) hub
|__usb3          1d6b:0002:0310 09  2.00  480MBit/s 0mA 1IF  (xhci_hcd 0000:00:14.0) hub
  |__3-4         2040:0265:0100 00  2.00  480MBit/s 500mA 1IF  (HCW dualHD 0013974388)
|__usb4          1d6b:0003:0310 09  3.00 5000MBit/s 0mA 1IF  (xhci_hcd 0000:00:14.0) hub
  |__4-2         f400:f400:0100 00  3.00 5000MBit/s 896mA 1IF  (SanDisk Ultra Fit 4C530001230229116042)

dmesg | grep 'usb'

[    2.962182] usbcore: registered new interface driver usbfs
[    2.962235] usbcore: registered new interface driver hub
[    2.962328] usbcore: registered new interface driver ethub
[    2.962412] usbcore: registered new device driver usb
[    3.020742] usbcore: registered new interface driver usb-storage
[    3.303051] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    3.561985] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    3.697319] drivers/usb/core/hub.c (2679) Same device found. Change serial to ffffffd1ffffffb2ffffffdbffffffa0
[    5.895471] usb 3-4: new high-speed USB device number 3 using xhci_hcd
[    7.134252] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[    7.146537] usb-storage 4-2:1.0: USB Mass Storage device detected
[    7.146571] scsi5 : usb-storage 4-2:1.0
[   45.097837] usbcore: registered new interface driver ax88179_178a
[   57.513754] usbcore: registered new interface driver usblp
[   57.544708] usbcore: registered new interface driver usbhid
[   57.544711] usbhid: USB HID core driver
[  242.897345] usb 3-4: reset high-speed USB device number 3 using xhci_hcd
[  243.166275] usb 3-4: reset high-speed USB device number 3 using xhci_hcd
[  243.379206] usb 3-4: reset high-speed USB device number 3 using xhci_hcd
[  245.385787] usb 3-4: reset high-speed USB device number 3 using xhci_hcd
[  245.873656] usb 3-4: reset high-speed USB device number 3 using xhci_hcd
[  246.133593] usb 3-4: reset high-speed USB device number 3 using xhci_hcd

Now - running VM Ubuntu 18.04 on DSM Virtual Machine Manager

Had to install Mediatree kernel - following Hauppauge Support Instructions - so that the USB tuner can be detected properly by the OS.

http://www.hauppauge.com/pages/support/support_linux.html

Ubuntu 18.04 - now detects the USB tuner - both Plex and tvheadend works - I have settled for Plex (as I have PlexPass) and Nvidia Shield TV 2017 - this combo is working well.

I could have went Ubuntu 18.04 - tvheadend / Nvdia Shield TV - Kodi (tvheadend client) - incurring no software cost.

 

Although this works, the VM is consuming alot of resources (my DSM box is i7-3770S | 8GB RAM) and I would like a better solution which uses less resources.

 

I will try the following... (as I want to native DSM Plex Package or Docker Plex)

1) mediatree backport on DSM kernel 'Linux DiskStation 3.10.102 #15284' on 6.1.7

2) mediatree backport on DSM kernel 'Linux DiskStation 4.4' on DSM 6.2

 

Has anyone tried this or have a better solution - please share.

 

 

 

 

Hi! did you get anything? I have the same problem too. With dualHD.

[Advanced Media Extension will not activate dsm7.1-42661]

On 7/21/2022 at 10:33 PM, AleAmadoC said:

Question, if you activate and revert back to loader SN/MAC,  does deactivate?

yes