AskuSU
-
Posts
5 -
Joined
-
Last visited
Posts posted by AskuSU
-
-
Hi all. I ordered a board for i3-n305 through aliexpress and am waiting for delivery from the seller. Once I have the board, I will try to install DSM on it, and I will report the results.
-
58 минут назад, kekesed97 сказал:
I'm using a real DVA3221 SN and MAC, but AME won't activate. And previously I have patched the AME activation with codec patch tool, but still won't activate.
After trying to declare the netif=... parameter in grub, finally it activated successfully.
But I only have HEVC in my box. I tried to reinstall it, but it still only show HEVC with no AAC. How is that happen?
I think the problem is in the version of the codec. in later it seems AAC appears. in turn, the codec version depends on the device model.
-
1
-
-
1 час назад, apriliars3 сказал:
I have SN and mac from other Synology model and not work with DVA1622.
The SN and mac is registered in my Synology account, but when try get license not works.If you look at this table you will notice that your model is not listed. So you could not put the firmware from this model in any way. So you installed the firmware from some other model.
I think that when you try to get a license, the firmware code of a specific model is checked with a serial number and a set of mac addresses.
Since you obviously don't have the right combination, I think that's why you're failing.
-
A variant with a real serial number and mac address from another device found on the Internet corresponding to the installed version. I confirm that it works.
I had a bootloader installed with an automatically generated serial number and mac address. i was getting an error and synology photos didn't process heic.
Tried this method didn't work
In the end, I rebuilt the bootloader with the SN found and the MAC just restored my system, logged into the synology account and I achieved the result.
Thanks everyone for the advice 🙂
-
1
-
Szbox N100 or N305 Nas Mainboard: 2 nvme, 6x Sata, 4x Intel 2.5Gbit, Low power
in DSM 7.x
Posted · Edited by AskuSU
Hello everyone, my long-awaited motherboard arrived in early March. For the first time, the seller canceled the shipment because they found some problems with the batch of motherboards. As a result, they sent it to me at the end of February.
The first launch is very long, after everything is initialized the launch becomes fast. hdmi only works in OS, it’s better not to rely on it, there are resolution problems there. But through DP everything works well.
I was able to install 32GB of memory from the Chinese brand PUSKILL, frequencies 5200MHz did not work, but at 4800MHz everything works.
https://www.aliexpress.com/item/1005005989535277.html?spm=a2g2w.orderdetail.0.0.d9704aa6ABmHvJ&sku_id=12000035200940840
I installed 2 SSDs in m2 from KingSpec, let's see how long they last
https://www.aliexpress.com/item/1005003844066987.html?spm=a2g2w.orderdetail.0.0.20f84aa6C22z9Q&sku_id=12000037919355571
Xpenology installed without any problems at all. I used the bootloader from Peter Suh, screenshots of the system and board are attached. I've been using it for 2 weeks now and it's great.
https://github.com/PeterSuh-Q3/tinycore-redpill