pikyuyin
-
Posts
3 -
Joined
-
Last visited
Posts posted by pikyuyin
-
-
On 4/20/2022 at 2:34 PM, pocopico said:
You can try the DS920+ geminilake platform. If you only have couple of disks it should work better for you. On DS920+ you specify the disks in the dtb file.
Hello sir,
First ,thanks for your read and understand my pool English,
I tried install DSM920+ but also show"No drive detected" ,
I already inserted a disk on Msata port (SATA1 port),so i guess the reason may be no disk on SATA0 port,but due to the hardware ,I cannot insert disk on SATA0port.
so is there any plan to solve this problem?
Finally ,thanks for your reading!!
-
Hello,sir,
When I was trying to install "DS918+_7.1.0" on my J1900 ,I met trouble:
SynologyDSM cannot find the disk due to SATA0 is empty.
This J1900 have only 1 SATA controller and have one SATA port(SATA0) and one msata (SATA1),I only have a Msata disk
here is the picture
I try to set "DiskIdxMap=00 SataPortMap=2 SasIdxMap=0",but DSM point
I also try to set"DiskIdxMap=00 SataPortMap=1 SasIdxMap=0",but DSM cannot find the disk
So,is there any solution
Finnal ,thanks for your read.
-
Hello,sir,
When I was trying to install "DS918+_7.1.0" on my J1900 ,I met trouble:
SynologyDSM cannot find the disk due to SATA0 is empty.
This J1900 have only 1 SATA controller and have one SATA port(SATA0) and one msata (SATA1),I only have a Msata disk
here is the picture
I try to set "DiskIdxMap=00 SataPortMap=2 SasIdxMap=0",but DSM point
I also try to set"DiskIdxMap=00 SataPortMap=1 SasIdxMap=0",but DSM cannot find the disk
So,is there any solution
Finnal ,thanks for your read.
SATA0 is empty how to install
in General Installation Questions/Discussions (non-hardware specific)
Posted
Hello sir,
First ,thanks for your read and understand my pool English,
I tried install DSM920+ but also show"No drive detected" ,
I already inserted a disk on Msata port (SATA1 port),so i guess the reason may be no disk on SATA0 port,but due to the hardware ,I cannot insert disk on SATA0port.
so is there any plan to solve this problem?
Finally ,thanks for your reading!!