Jump to content
XPEnology Community

FunThomas

Rookie
  • Posts

    2
  • Joined

  • Last visited

Posts posted by FunThomas

  1. 5 minutes ago, pocopico said:

     

    Can you press e while at grub and try SataPortMap=58 and DiskIdxMap=0F00 ?

     

     

    i found out that the reported error hard disk drives are the numbers not working (1..9)

    so 1,2,3,6 broken means on controller 0..5 -> 0,1,2 and 5 are broken(not used/not connected)

    so 3&4 is connected and working


    so i switched the hdds to sata ports 0+1 and the error switched to error on hdd 3,4,5,6


    so i changed the config manually to

        "SataPortMap": "2",
        "DiskIdxMap": "00"


    and now all hdds are detected as working

     

    is there a way to mask out ports 2-5 on controller to not use and have SataPortMap still set to 6?
     

  2. Hello,

    i have problems with the hard drive errors and sata ports being disabled aka satamapping problem :-(
    the synology webpage reports hard drives 1,2,3,6 broken and disabled, i dont know why its 4 drives since there are only 2 hdds (2x8TB) and the usb inserted

    Loader results:
     

    sudo ./rploader.sh satamap now
    HBA: 00:1f.2 Disks : 6
    SataPortMap=6
    DiskIdxMap=00

    so for me it looks ok -> 6 ports on 1st controller and mapping with no offset

    tc@box:~$ lsscsi -Hv
    [0]    ahci
      dir: /sys/class/scsi_host//host0
      device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata1/host0
    [1]    ahci
      dir: /sys/class/scsi_host//host1
      device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata2/host1
    [2]    ahci
      dir: /sys/class/scsi_host//host2
      device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata3/host2
    [3]    ahci
      dir: /sys/class/scsi_host//host3
      device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata4/host3
    [4]    ahci
      dir: /sys/class/scsi_host//host4
      device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata5/host4
    [5]    ahci
      dir: /sys/class/scsi_host//host5
      device dir: /sys/devices/pci0000:00/0000:00:1f.2/ata6/host5
    [6]    usb-storage
      dir: /sys/class/scsi_host//host6
      device dir: /sys/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/host6


    but i see the hdds are connected to sata port 3+4 on mainboard (error -> hdd 1,2,3,6 broken)

    tc@box:~$ ls -ldtr /sys/class/scsi_host/host*/device/port*
    ls: cannot access '/sys/class/scsi_host/host*/device/port*': No such file or directory
    tc@box:~$ ls -ldtr /sys/class/scsi_host/host*/device/target*
    drwxr-xr-x 4 root root 0 Mar 28 08:22 /sys/class/scsi_host/host4/device/target4:0:0/
    drwxr-xr-x 4 root root 0 Mar 28 08:22 /sys/class/scsi_host/host3/device/target3:0:0/
    drwxr-xr-x 4 root root 0 Mar 28 08:22 /sys/class/scsi_host/host6/device/target6:0:0/
    tc@box:~$ ls -ldtr /sys/class/scsi_host/host*/device/phy*
    ls: cannot access '/sys/class/scsi_host/host*/device/phy*': No such file or directory

    when i change hdds to sata port 0+1 (without changing config) i get error on hdd 3,4,5,6

    DiskStation> ls -ldtr /sys/class/scsi_host/host*/device/target*
    drwxr-xr-x    4 root     root             0 Jan  1 00:07 /sys/class/scsi_host/host6/device/target6:0:0
    drwxr-xr-x    4 root     root             0 Mar 28  2022 /sys/class/scsi_host/host1/device/target1:0:0
    drwxr-xr-x    4 root     root             0 Mar 28  2022 /sys/class/scsi_host/host0/device/target0:0:0

    is it normal start it starts with index 6 and then counts down to 0 of the targets?

     

    does someone have some hints for me with the setting of SataPortMap and DiskIdxMap?

     

    some additional info outputs if maybe needed:
    here fdisk -l with skipped /dev/ram0-7 and /dev/loop0-51

    tc@box:~$ fdisk -l            
    Disk /dev/sda: 7.28 TiB, 8001563222016 bytes, 15628053168 sectors
    Disk model: TOSHIBA HDWG480
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 4096 bytes
    I/O size (minimum/optimal): 4096 bytes / 4096 bytes
    Disklabel type: gpt
    Disk identifier: xxx
    
    Device     Start         End     Sectors  Size Type
    /dev/sda1   2048 15628052479 15628050432  7.3T Microsoft basic data
    
    
    Disk /dev/sdb: 7.28 TiB, 8001563222016 bytes, 15628053168 sectors
    Disk model: TOSHIBA HDWG480
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 4096 bytes
    I/O size (minimum/optimal): 4096 bytes / 4096 bytes
    Disklabel type: gpt
    Disk identifier: xxx
    
    Device     Start         End     Sectors  Size Type
    /dev/sdb1   2048 15628052479 15628050432  7.3T Microsoft basic data
    
    
    Disk /dev/sdc: 29.3 GiB, 31457280000 bytes, 61440000 sectors
    Disk model: Flash Disk
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disklabel type: dos
    Disk identifier: xxx
    
    Device     Boot  Start     End Sectors  Size Id Type
    /dev/sdc1  *      2048  100351   98304   48M 83 Linux
    /dev/sdc2       100352  253951  153600   75M 83 Linux
    /dev/sdc3       253952 2097151 1843200  900M 83 Linux


     

    tc@box:~$ lspci -nnqk
    00:00.0 Host bridge [0600]: Intel Corporation 4th Gen Core Processor DRAM Controller [8086:0c00] (rev 06)
            Subsystem: Fujitsu Technology Solutions Device [1734:11e7]
            Kernel driver in use: hsw_uncore
    00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [8086:0412] (rev 06)
            Subsystem: Fujitsu Technology Solutions Device [1734:11e7]
    00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06)
            Subsystem: Fujitsu Technology Solutions Device [1734:11e7]
    00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 04)
            Subsystem: Fujitsu Technology Solutions Device [1734:11ea]
            Kernel driver in use: xhci_hcd
    00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
            Subsystem: Fujitsu Technology Solutions Device [1734:11ea]
            Kernel driver in use: mei_me
    00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection I217-LM [8086:153a] (rev 04)
            Subsystem: Fujitsu Technology Solutions Device [1734:11ed]
            Kernel driver in use: e1000e
    00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 04)
            Subsystem: Fujitsu Technology Solutions Device [1734:11ea]
            Kernel driver in use: ehci-pci
    00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 04)
            Subsystem: Fujitsu Technology Solutions Device [1734:11eb]
    00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d4)
            Kernel driver in use: pcieport
    00:1c.1 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #2 [8086:8c12] (rev d4)
            Kernel driver in use: pcieport
    00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 04)
            Subsystem: Fujitsu Technology Solutions Device [1734:11ea]
            Kernel driver in use: ehci-pci
    00:1f.0 ISA bridge [0601]: Intel Corporation Q87 Express LPC Controller [8086:8c4e] (rev 04)
            Subsystem: Fujitsu Technology Solutions Device [1734:11ea]
            Kernel driver in use: lpc_ich
    00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02] (rev 04)
            Subsystem: Fujitsu Technology Solutions Device [1734:11ea]
            Kernel driver in use: ahci
    00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 04)
            Subsystem: Fujitsu Technology Solutions Device [1734:11ea]
    00:1f.6 Signal processing controller [1180]: Intel Corporation 8 Series Chipset Family Thermal Management Controller [8086:8c24] (rev 04)
            Subsystem: Fujitsu Technology Solutions Device [1734:11ea]
            Kernel driver in use: intel_pch_thermal
    02:00.0 PCI bridge [0604]: Integrated Device Technology, Inc. [IDT] PES3T3 PCI Express Switch [111d:8039] (rev 0e)
            Kernel driver in use: pcieport
    03:02.0 PCI bridge [0604]: Integrated Device Technology, Inc. [IDT] PES3T3 PCI Express Switch [111d:8039] (rev 0e)
            Kernel driver in use: pcieport
    03:03.0 PCI bridge [0604]: Integrated Device Technology, Inc. [IDT] PES3T3 PCI Express Switch [111d:8039] (rev 0e)
            Kernel driver in use: pcieport
    04:00.0 FireWire (IEEE 1394) [0c00]: LSI Corporation FW643 [TrueFire] PCIe 1394b Controller [11c1:5901] (rev 08)
            Subsystem: IOI Technology Corp FWB-PCIE1X2x [1546:0643]
    05:00.0 FireWire (IEEE 1394) [0c00]: LSI Corporation FW643 [TrueFire] PCIe 1394b Controller [11c1:5901] (rev 08)
            Subsystem: IOI Technology Corp FWB-PCIE1X2x [1546:0643]

     

×
×
  • Create New...