Derrik
-
Posts
10 -
Joined
-
Last visited
Posts posted by Derrik
-
-
Installation page shows system will restart immediately in 10 min.1 hour later, Synology Assistant still shows Not installed.what is the problem?
-
msi B460M MORTAR tl8125b 2.5Gigabit Ethernet can not be driven,I have tried the latest version。
-
On 2/14/2022 at 5:46 AM, IG-88 said:
what loader and extra.lzma version did you use?
extra.lzma/extra2.lzma for loader 1.04b ds918+ DSM 6.2.3 v0.13.6 got the latest 8125 driver, that one should work, if you used this one then add a 1G nic to get it working and provide a log (dmesg), i dont own a 8125 based card so i cant test
3615/17 is no joy as the newer realtek 8125 driver versions dont compile against kernel 3.10 so no newer driver then the one that already is there (newer card revisions dont work, presumably depending on phy chip)
I used the extra.lzma/extra2.lzma for loader 1.04b ds918+ DSM 6.2.3 v0.13.6. I added a 1G nic(intel i210) and it can't be driven either.
-
2 minutes ago, Dvalin21 said:
If they arent working try mptsas and I'd that don't work try megaraid_sas
pocopico/rp-ext/mpt3sas mpt2sas megaraid_sas and the tiny core loader ,I have already tried them.
-
DELL H310 RAID CARD(passthrough it mode)
01:00.0 RAID bus controller [0104]: Broadcom / LSI SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] [1000:0072] (rev 03)
I can find my corresponding id in the pocopico/mpt2sas&mpt3sas,but the HBA card can not be drivered.
-
23 hours ago, Derrik said:
I have a DELL H310 raid card(passthrough it mode),I tried to use "aacraid" and"mpt2sas",but it can't be drivered.Could you made a ext for it?
Loader version and type (918+): redpill apollolake-7.0.1-42218(rp-helper.sh)
DSM version in use (including critical update): DSM7.0.1-42218
Using custom modules/ramdisk? If yes which one?: pocopico aacraid,mpt2sas
Hardware details: Motherboard: B460MOTOR; HBA card: DELL H310
01:00.0 RAID bus controller [0104]: Broadcom / LSI SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] [1000:0072] (rev 03)
I can find my corresponding id in the mpt2sas&mpt3sas
-
filename: /home/hang/mpt3sas.ko
alias: mpt2sas
version: 22.00.00.00
license: GPL
description: LSI MPT Fusion SAS 3.0 & SAS 3.5 Device Driver
author: Avago Technologies <MPT-FusionLinux.pdl@avagotech.com>
srcversion: 80624A1362CD953ED59AF65
alias: pci:v00001000d000000D2sv*sd*bc*sc*i*
alias: pci:v00001000d000000D1sv*sd*bc*sc*i*
alias: pci:v00001000d000000D0sv*sd*bc*sc*i*
alias: pci:v00001000d000000ACsv*sd*bc*sc*i*
alias: pci:v00001000d000000ABsv*sd*bc*sc*i*
alias: pci:v00001000d000000AAsv*sd*bc*sc*i*
alias: pci:v00001000d000000AFsv*sd*bc*sc*i*
alias: pci:v00001000d000000AEsv*sd*bc*sc*i*
alias: pci:v00001000d000000ADsv*sd*bc*sc*i*
alias: pci:v00001000d000000C3sv*sd*bc*sc*i*
alias: pci:v00001000d000000C2sv*sd*bc*sc*i*
alias: pci:v00001000d000000C1sv*sd*bc*sc*i*
alias: pci:v00001000d000000C0sv*sd*bc*sc*i*
alias: pci:v00001000d000000C8sv*sd*bc*sc*i*
alias: pci:v00001000d000000C7sv*sd*bc*sc*i*
alias: pci:v00001000d000000C6sv*sd*bc*sc*i*
alias: pci:v00001000d000000C5sv*sd*bc*sc*i*
alias: pci:v00001000d000000C4sv*sd*bc*sc*i*
alias: pci:v00001000d000000C9sv*sd*bc*sc*i*
alias: pci:v00001000d00000095sv*sd*bc*sc*i*
alias: pci:v00001000d00000094sv*sd*bc*sc*i*
alias: pci:v00001000d00000091sv*sd*bc*sc*i*
alias: pci:v00001000d00000090sv*sd*bc*sc*i*
alias: pci:v00001000d00000097sv*sd*bc*sc*i*
alias: pci:v00001000d00000096sv*sd*bc*sc*i*
alias: pci:v00001000d0000007Esv*sd*bc*sc*i*
alias: pci:v00001000d000002B0sv*sd*bc*sc*i*
alias: pci:v00001000d0000006Esv*sd*bc*sc*i*
alias: pci:v00001000d00000087sv*sd*bc*sc*i*
alias: pci:v00001000d00000086sv*sd*bc*sc*i*
alias: pci:v00001000d00000085sv*sd*bc*sc*i*
alias: pci:v00001000d00000084sv*sd*bc*sc*i*
alias: pci:v00001000d00000083sv*sd*bc*sc*i*
alias: pci:v00001000d00000082sv*sd*bc*sc*i*
alias: pci:v00001000d00000081sv*sd*bc*sc*i*
alias: pci:v00001000d00000080sv*sd*bc*sc*i*
alias: pci:v00001000d00000065sv*sd*bc*sc*i*
alias: pci:v00001000d00000064sv*sd*bc*sc*i*
alias: pci:v00001000d00000077sv*sd*bc*sc*i*
alias: pci:v00001000d00000076sv*sd*bc*sc*i*
alias: pci:v00001000d00000074sv*sd*bc*sc*i*
alias: pci:v00001000d00000072sv*sd*bc*sc*i*
alias: pci:v00001000d00000070sv*sd*bc*sc*i*
depends:
retpoline: Y
vermagic: 4.4.180+ SMP mod_unload
parm: logging_level: bits for enabling additional logging info (default=0)
parm: sdev_queue_depth: globally setting SAS device queue depth
parm: max_sectors:max sectors, range 64 to 32767 default=32767 (ushort)
parm: command_retry_count: Device discovery TUR command retry count: (default=144) (int)
parm: missing_delay: device missing delay , io missing delay (array of int)
parm: host_lock_mode:Enable SCSI host lock if set to 1(default=0) (int)
parm: max_lun: max lun, default=16895 (int)
parm: hbas_to_enumerate: 0 - enumerates all SAS 2.0, SAS3.0 & above generation HBAs
1 - enumerates only SAS 2.0 generation HBAs
2 - enumerates SAS 3.0 & above generation HBAs (default=-1, Enumerates all SAS 2.0, SAS 3.0 & above generation HBAs else SAS 3.0 & above generation HBAs only) (int)
parm: mpt3sas_multipath: enabling mulipath support for target resets (default=0) (int)
parm: multipath_on_hba: Multipath support to add same target device
as many times as it is visible to HBA from various paths
(by default:
SAS 2.0,SAS 3.0 HBA & SAS3.5 HBA-This will be disabled) (int)
parm: disable_eedp: disable EEDP support: (default=0) (uint)
parm: diag_buffer_enable: post diag buffers (TRACE=1/SNAPSHOT=2/EXTENDED=4/default=0) (int)
parm: disable_discovery: disable discovery (int)
parm: allow_drive_spindown: allow host driver to issue START STOP UNIT(STOP) command to spindown the drive before shut down or driver unload, default=1,
Dont spindown any SATA drives =0 / Spindown SSD but not HDD = 1/ Spindown HDD but not SSD =2/ Spindown all SATA drives =3 (uint)
parm: prot_mask: host protection capabilities mask, def=0x7f (int)
parm: protection_guard_mask: host protection algorithm mask, def=3 (int)
parm: issue_scsi_cmd_to_bringup_drive: allow host driver to issue SCSI commands to bring the drive to READY state, default=1 (int)
parm: sata_smart_polling: poll for smart errors on SATA drives: (default=0) (uint)
parm: max_queue_depth: max controller queue depth (int)
parm: max_sgl_entries: max sg entries (int)
parm: msix_disable: disable msix routed interrupts (default=0) (int)
parm: smp_affinity_enable:SMP affinity feature enable/disbale Default: enable(1) (int)
parm: max_msix_vectors: max msix vectors (int)
parm: mpt3sas_fwfault_debug: enable detection of firmware fault and halt firmware - (default=0)
-
msi b460 mortar 8125b can not be drivered.
-
I have a DELL H310 raid card(passthrough it mode),I tried to use "aacraid" and"mpt2sas",but it can't be drivered.Could you made a ext for it?
Loader version and type (918+): redpill apollolake-7.0.1-42218(rp-helper.sh)
DSM version in use (including critical update): DSM7.0.1-42218
Using custom modules/ramdisk? If yes which one?: pocopico aacraid,mpt2sas
Hardware details: Motherboard: B460MOTOR; HBA card: DELL H310
TinyCore RedPill Loader (TCRP)
in Loaders
Posted · Edited by Derrik
hardware details:msi b460m mortar /lsi 2008 HBA card（all the hard disks are connected to the HBA card）
bootloader version:tingcore0.8.0.0
DSM version:DSM7.0.1 42218/DSM7.1 42661 I tried to install them,The problems are the same。
fresh install
Can you ping the machine? yes.
Does Synology Assistant see it? Synology Assistant can find the machine.The progress bar has reached 100%，The machine is about to restart to complete the installation in 10 min.it still shows system is not installed after a long time.The countdown page appears repeated.