Jump to content
XPEnology Community

zhbitmaye

Rookie
 View Profile  See their activity

  • Posts

    6

  • Joined

  • Last visited

 Content Type 

Posts posted by zhbitmaye

    RedPill - the new loader for 6.2.4 - Discussion

    in Developer Discussion Room

    Posted

    42 minutes ago, coint_cho said:

    image.png.7972e9f8808ac772ae313deb424aa010.png

    Built with these config and still same issues.

    try add DiskIdxMap and SataPortMap in “extra_cmdline”

     

    this is my config：

    {
      "extra_cmdline": {
         "pid": "0x0001",
          "vid": "0x46f4",
          "sn": "XXXXX",
          "mac1": "YYYY",
          "DiskIdxMap" : "0004",
          "SataPortMap" : "48",
          "SasIdxMap" : "0"
      },
      "synoinfo": {},
      "ramdisk_copy": {}
    }
     

    RedPill - the new loader for 6.2.4 - Discussion

    in Developer Discussion Room

    Posted

    41 minutes ago, zhbitmaye said:

    I Maybe know why lose disk 9 10 11

     

    in

    /etc.defaults/synoinfo.conf

     

    internalportcfg="0x78FF"

    is
    111100011111111

     

    disk 9 10 11  = 0   they can‘t use  

     

    I don't know why ds3615's config is internalportcfg="0x78FF"

     

    I tried to rewrite internalportcfg="0xfff"    esataportcfg="0x0"  maxdisks=12

     

    bug when reboot DSM，These will be restored without saving the changes

     

    I'm sure I saved it before I restarted, I used ： wq ，and I have entered the view again after saving

     

    I don't know why

    I try to modify config when compiling loader use redpill-tool-chain

     

    internalportcfg="0xfff"    esataportcfg="0x0"  usbportcfg="0x0"  maxdisks=12

     

    I can use disk 9 10 11 and identify all hard drives Yeah！！！

     

    bug I can’t modify config after install DSM use vi /etc.defaults/synoinfo.conf

     

    when reboot DSM，These will be restored without saving the changes too

     

     

    RedPill - the new loader for 6.2.4 - Discussion

    in Developer Discussion Room

    Posted

    15 minutes ago, zhbitmaye said:

     

    First，thanks your answer

     

    I tried your config，it is not OK

    result：

    vmware disk = 2

    SAS = 4 5 6 7 8    （lose disk 9 10 11）

     

    eg:

    DiskProtMap=58  DiskIdexMap=0006
    VM=2
    SAS= 6 7 8 12 13    （lose disk 9 10 11）

     

    It looks like a disk is in use disk9 10 11，I never cat't use it

    any config lose disk 9 10 11

     

    lspci -k：

    0000:02:01.0 Class 0106: Device 15ad:07e0
            DeviceName: sata0
            Subsystem: Device 15ad:07e0
            Kernel driver in use: ahci
    0000:02:02.0 Class 0106: Device 15ad:07e0
            Subsystem: Device 1014:03cb
            Kernel driver in use: mpt2sas
    0000:03:00.0 Class 0200: Device 8086:10d3
            DeviceName: Ethernet0
            Subsystem: Device 15ad:07d0
            Kernel driver in use: e1000e

     

     

    I Maybe know why lose disk 9 10 11

     

    in

    /etc.defaults/synoinfo.conf

     

    internalportcfg="0x78FF"

    is
    111100011111111

     

    disk 9 10 11  = 0   they can‘t use  

     

    I don't know why ds3615's config is internalportcfg="0x78FF"

     

    I tried to rewrite internalportcfg="0xfff"    esataportcfg="0x0"  maxdisks=12

     

    bug when reboot DSM，These will be restored without saving the changes

     

    I'm sure I saved it before I restarted, I used ： wq ，and I have entered the view again after saving

     

    I don't know why

    RedPill - the new loader for 6.2.4 - Discussion

    in Developer Discussion Room

    Posted · Edited by zhbitmaye

    8 hours ago, pocopico said:

    I have succesfully identified all 8 disks on a VM running DS918+ 7.0.1.

     

    None of the settings you've made make sence to me. You need to verify how the system sees your controllers by running lspci -k, then what you configure is up to you.

     

    It looks like your SAS controller is the second one in the list.

     

    So if you verify with lspci -k that you have two disk controllers only (ahci or sas), i would try,

    "SataPortMap" : "28",

    "DiskIdxMap" : "0003"

     

    but you may also read on this thread page 96 - 99 and especially this :

     

     

     

     

     

    First，thanks your answer

     

    I tried your config，it is not OK

    result：

    vmware disk = 2

    SAS = 4 5 6 7 8    （lose disk 9 10 11）

     

    eg:

    DiskProtMap=58  DiskIdexMap=0006
    VM=2
    SAS= 6 7 8 12 13    （lose disk 9 10 11）

     

    It looks like a disk is in use disk9 10 11，I never cat't use it

    any config lose disk 9 10 11

     

    lspci -k：

    0000:02:01.0 Class 0106: Device 15ad:07e0
            DeviceName: sata0
            Subsystem: Device 15ad:07e0
            Kernel driver in use: ahci
    0000:02:02.0 Class 0106: Device 15ad:07e0
            Subsystem: Device 1014:03cb
            Kernel driver in use: mpt2sas
    0000:03:00.0 Class 0200: Device 8086:10d3
            DeviceName: Ethernet0
            Subsystem: Device 15ad:07d0
            Kernel driver in use: e1000e

     

     

    RedPill - the new loader for 6.2.4 - Discussion

    in Developer Discussion Room

    Posted

    I add mp2sas driver use LSI9211-8I on ESXi，I just Identify 6 HDDs，but I have 8 HDDSs，I tried this config：

     

    1.

    "DiskIdxMap" : "0002",
     "SataPortMap" : "28",

     

    "DiskIdxMap" : "00020C",
     "SataPortMap" : "288",

     

    "DiskIdxMap" : "000C02",
     "SataPortMap" : "268",

    vmware disk is 2

    SAS is 3~8 lose latest 2 HDD，just Identify 6 HDDs

     

     

    2."DiskIdxMap" : "0006",
     "SataPortMap" : "58",

    vmware disk is 2

    SAS is 6 7 8 12 13 lose latest 2 HDD too，just Identify 6 HDDs

     

    3.

    "DiskIdxMap" : "0009",
     "SataPortMap" : "88",

    vmware disk is 2

    SAS is 12 13 14 15 lose latest 4 HDD too，just Identify 4 HDDs

     

     

    I tried more ，bug only can Identify 6 HDDs to more

     

    is this loader can‘t Identify all LSI-SAS Disks？

     

     

×
×
  • Create New...