procsacs
-
Posts
8 -
Joined
-
Last visited
Posts posted by procsacs
-
-
hmm interesing it's just a BIOS setup ? Or you change something in img file ?
MiniDLNA work in old DSM version, but you need good version of MiniDLNA (platform version) i get for DS1019+ and work of in DSM 6.2.2.
I am currently using at DS1019+ version, but I don't know how reliable the system is, it doesn't install updates. It's work ok.
-
-
1 hour ago, AlexChu said:
Try this image
I still have the motherboard and I will try to raise the system on it and unsubscribe. Wait a day or two
Still that same, adress IP on network but no work ;/ OK i will wait, thanks so much !!!
-
Disk empty, no partition i try 4 different HDD and SDD, GPT, MBR etc...
photo from IP and PING
in THIS topic, you turned off the second network card, and turned ON UEFi? When i turn ON UEFi i have no IP adress in scaner.
Me config in grub.cfg, mac1=00224DADF1FD it's me first LAN card, i try to turn OFF first, and ON second witch second MAC adress but still this sam situation :
Spoilerif serial --port=0x3F8 --speed=115200;then
set has_serial=true
terminal_input --append serial
terminal_output --append serial
else
clear
fiterminal_input --append console
terminal_output --append consoleif [ x"${grub_platform}" = xefi ]; then
insmod efi_gop
insmod efi_uga
else
insmod vbe
fiset extra_initrd="extra.lzma"
set info="info.txt"set vid=0x13fe
set pid=0x4100
set sn=1230LWN028723
set mac1=00224DADF1FD
set rootdev=/dev/md0
set netif_num=1
set extra_args_3615=''
#set extra_args_3615='earlycon=uart8250,io,0x3f8,115200n8 earlyprintk loglevel=15'set common_args_3615='syno_hdd_powerup_seq=0 HddHotplug=0 syno_hw_version=DS3615xs vender_format_version=2 console=ttyS0,115200n8 withefi elevator=elevator quiet syno_port_thaw=1'
set sata_args='sata_uid=1 sata_pcislot=5 synoboot_satadom=1 DiskIdxMap=0C SataPortMap=1 SasIdxMap=0'
set default='0'
set timeout='1'
set fallback='1'if [ -s $prefix/grubenv ]; then
load_env
if [ -n "$saved_entry" ]; then
set default="${saved_entry}"
fi
fiVERSION="with Jun's Mod v1.03b"
search --file -s /bzImage
function savedefault {
if [ -s $prefix/grubenv ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}function do_option {
if [ $# -lt 2 ]; then
eval "set value=\"\$$1\""
echo "current $1: $value"; return;
fi
set key=$1
shift
set $key="$*"
if [ -s $prefix/grubenv ]; then
save_env $key
fi
}function vid { do_option vid $@; }
function pid { do_option pid $@; }
function sn { do_option sn $@; }
function mac1 { do_option mac1 $@; }
function mac2 { do_option mac2 $@; }
function mac3 { do_option mac3 $@; }
function mac4 { do_option mac4 $@; }
function rootdev { do_option rootdev $@; }
function append { do_option extra_args_3615 $@; }function vidpid {
if [ $# -lt 2 ]; then
echo "usage: vidpid 0xVVVV 0xPPPP"; return;
fi
set usb_args="vid=$1 pid=$2"
if [ -s $prefix/grubenv ]; then
save_env usb_args
fi
}function showtips {
if [ -n "$has_serial" ]; then
terminal_output --remove serial
fi
echo "Screen will stop updating shortly, please open http://find.synology.com to continue."
echo
echo
if [ -n "$has_serial" ]; then
terminal_output --append serial
fi
}function loadinitrd {
if [ -s $img/$info ]; then
if [ -n "$has_serial" ]; then
terminal_output --remove serial
fi
cat $img/$info
if [ -n "$has_serial" ]; then
terminal_output --append serial
fi
fi
# if [ -s $img/$extra_initrd ]; then
# initrd $img/rd.gz $img/$extra_initrd
# else
# initrd $img/rd.gz
# fi
}function common_add_option {
eval "set value=\"\$$1\""
if [ -z $value ]; then return 1; fi
set common_args="$common_args $1=$value"
}function common_add_option_ex {
eval "set value=\"\$$1\""
if [ -z $value ]; then return 1; fi
set common_args="$common_args $2=$value"
}function loadlinux {
set model=$1
set bootdev=$2
shift 2
if [ -n $vid -a -n $pid ]; then
set usb_args="vid=$vid pid=$pid"
fi
eval "set common_args=\"\$common_args_$model\""
eval "set extra_args=\"\$extra_args_$model\""
eval "set bootdev_args=\"\$${bootdev}_args\""
common_add_option_ex rootdev root
common_add_option sn
if common_add_option mac1; then set netif_num=1; fi
if common_add_option mac2; then set netif_num=2; fi
if common_add_option mac3; then set netif_num=3; fi
if common_add_option mac4; then set netif_num=4; fi
common_add_option netif_num
if [ -z $zImage ]; then
set zImage=bzImage
fi
linux $img/$zImage $common_args $bootdev_args $extra_args $@
}menuentry "DS3615xs 6.2 Baremetal $VERSION" --class os {
set img=
savedefault
loadlinux 3615 usb
loadinitrd
showtips
}menuentry "DS3615xs 6.2 Baremetal $VERSION Reinstall" --class os {
set img=
loadlinux 3615 usb mfg
loadinitrd
showtips
}#menuentry "DS3615xs 6.2 Baremetal AMD $VERSION" --class os {
# set img=
# set zImage=bzImage
# savedefault
# loadlinux 3615 usb
# loadinitrd
# showtips
#}menuentry "DS3615xs 6.2 VMWare/ESXI $VERSION" --class os {
set img=
savedefault
loadlinux 3615 sata
loadinitrd
showtips
}
-
Thank you for the answer, you managed to install it in THIS topic, as I understood correctly, you turned off the second network card, and turned on UEFi?
I try without 4 port SATA Mini Pci-E, but no positive result ;/ For test i connected one, or two empty hard disk, no success. On loader 1.03b (DS3615xs) I can see IP adress on network, but no work form WEB, or synology assistance.
-
Hello, i try install at last 7 days... DSM 6.1/2 on mobo intel D2500CC no visable on Synology Assistant, it's work without problem on 5.2 version.
Spec :
D2500CC (last bios 0040)
Intel Atom D2500
Intel NM10 Express
Dual Gigabit LAN Intel 82574L (Ven: 8086, Dev: 10D3 - 82574L)
4GB DDR 3 1066Mhz
2 Port SATA NM10/ICH7 + extra 4 Port SATA III Mini Pci-E SI-MPE40125 IO Crest (88SE9215 PCIe?)
(4x4TB RED WD, but i try 4 another hard drivrs and SSD drivers)
I try loaders (DS3615xs/DS3617xs) 1.01, 1.02, 1.02MBR, 1.03b and 1.04b but no one work for me ;/ I try mbr versions, i change files extra.lzma, zImage, rd.gz, different configurations i try UEFi off, on, one LAN ON, second LAN ON... loaders boot from USB at UEFi OFF, but find.synology.com , and Synology Assistant not see that mobo Intel D2500CC, i see the IP adress on me network , ping ok, but cannot entry form web. Of course i set VID/PID for USB stick, and MAC adress for one , or two LAN. I try another router, another PC and nothing ;/
I found one user on that intel mobo who success install DSM 6.2.2-24922 Update 4, on this TOPIC
What i doo wrong ? Only one thing is suspect for me, USB stick (i try 3 different, and in USB-HDD, USB-FDD, UZB-ZIP mode) is visable in bios like hard drive, not removable drive, its that normal ?
Form SSH DSM 5.2 :
SpoilerDiskStation> lspci -k | grep 'Kernel driver'
Kernel driver in use: pcieport
Kernel driver in use: pcieport
Kernel driver in use: pcieport
Kernel driver in use: uhci_hcd
Kernel driver in use: uhci_hcd
Kernel driver in use: uhci_hcd
Kernel driver in use: uhci_hcd
Kernel driver in use: ehci-pci
Kernel driver in use: lpc_ich
Kernel driver in use: ahci
Kernel driver in use: e1000e
Kernel driver in use: ahciDiskStation> ifconfig eth0
eth0 Link encap:Ethernet HWaddr 00:22:4D:AD:F1:FD
inet addr:192.168.1.234 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::222:4dff:fead:f1fd/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:25950 errors:0 dropped:0 overruns:0 frame:0
TX packets:12987 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:31726997 (30.2 MiB) TX bytes:4277402 (4.0 MiB)
Interrupt:17 Memory:d0120000-d0140000
DiskStation>lspci -k
00:00.0 Class 0600: Device 8086:0bf5 (rev 04)
Subsystem: Device 8086:202c
00:02.0 Class 0300: Device 8086:0be1 (rev 0b)
Subsystem: Device 8086:202c
00:1c.0 Class 0604: Device 8086:27d0 (rev 02)
Kernel driver in use: pcieport
00:1c.1 Class 0604: Device 8086:27d2 (rev 02)
Kernel driver in use: pcieport
00:1c.2 Class 0604: Device 8086:27d4 (rev 02)
Kernel driver in use: pcieport
00:1d.0 Class 0c03: Device 8086:27c8 (rev 02)
Subsystem: Device 8086:202c
Kernel driver in use: uhci_hcd
00:1d.1 Class 0c03: Device 8086:27c9 (rev 02)
Subsystem: Device 8086:202c
Kernel driver in use: uhci_hcd
00:1d.2 Class 0c03: Device 8086:27ca (rev 02)
Subsystem: Device 8086:202c
Kernel driver in use: uhci_hcd
00:1d.3 Class 0c03: Device 8086:27cb (rev 02)
Subsystem: Device 8086:202c
Kernel driver in use: uhci_hcd
00:1d.7 Class 0c03: Device 8086:27cc (rev 02)
Subsystem: Device 8086:202c
Kernel driver in use: ehci-pci
00:1e.0 Class 0604: Device 8086:2448 (rev e2)
00:1f.0 Class 0601: Device 8086:27bc (rev 02)
Subsystem: Device 8086:202c
Kernel driver in use: lpc_ich
00:1f.2 Class 0106: Device 8086:27c1 (rev 02)
Subsystem: Device 8086:202c
Kernel driver in use: ahci
00:1f.3 Class 0c05: Device 8086:27da (rev 02)
Subsystem: Device 8086:202c
02:00.0 Class 0200: Device 8086:10d3
Subsystem: Device 8086:202c
Kernel driver in use: e1000e
03:00.0 Class 0106: Device 1b4b:9215 (rev 11)
Subsystem: Device 1b4b:9215
Kernel driver in use: ahci
DiskStation> lspci -q
00:00.0 Host bridge: Intel Corporation Atom Processor D2xxx/N2xxx DRAM Controlle r (rev 04)
00:02.0 VGA compatible controller: Intel Corporation Atom Processor D2xxx/N2xxx Integrated Graphics Controller (rev 0b)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 0 2)
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 0 2)
00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 0 2)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller # 1 (rev 02)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller # 2 (rev 02)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller # 3 (rev 02)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller # 4 (rev 02)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation NM10/ICH7 Family SATA Controller [AHC I mode] (rev 02)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02)
02:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
03:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9215 PCIe 2.0 x1 4-po rt SATA 6 Gb/s Controller (rev 11)
pcilib: Cannot write to /var/services/homes/admin/.pciids-cache: No such file or directory
DiskStation> uname -a
Linux DiskStation 3.10.35 #1 SMP Sun Jul 17 16:02:22 CEST 2016 x86_64 GNU/Linux synology_bromolow_3615xs
DiskStation>
DiskStation> ethtool -i
ethtool: bad command line argument(s)
For more information run ethtool -h
DiskStation> ethtool -i
ethtool: bad command line argument(s)
For more information run ethtool -h
DiskStation> ethtool -i eth0
driver: e1000e
version: 3.3.3-NAPI
firmware-version: 2.1-2
bus-info: 0000:02:00.0
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: no
lspci -v
00:00.0 Class 0600: Device 8086:0bf5 (rev 04)
Subsystem: Device 8086:202c
Flags: bus master, fast devsel, latency 000:02.0 Class 0300: Device 8086:0be1 (rev 0b)
Subsystem: Device 8086:202c
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at d0200000 (32-bit, non-prefetchable) [size=1M]
I/O ports at 30d0 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>00:1c.0 Class 0604: Device 8086:27d0 (rev 02)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: d0400000-d05fffff
Prefetchable memory behind bridge: 00000000d0600000-00000000d07fffff
Capabilities: <access denied>
Kernel driver in use: pcieport00:1c.1 Class 0604: Device 8086:27d2 (rev 02)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d0100000-d01fffff
Prefetchable memory behind bridge: 00000000d0800000-00000000d09fffff
Capabilities: <access denied>
Kernel driver in use: pcieport00:1c.2 Class 0604: Device 8086:27d4 (rev 02)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: d0000000-d00fffff
Prefetchable memory behind bridge: 00000000d0a00000-00000000d0cfffff
Capabilities: <access denied>
Kernel driver in use: pcieport00:1d.0 Class 0c03: Device 8086:27c8 (rev 02)
Subsystem: Device 8086:202c
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at 30a0 [size=32]
Kernel driver in use: uhci_hcd00:1d.1 Class 0c03: Device 8086:27c9 (rev 02)
Subsystem: Device 8086:202c
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 3080 [size=32]
Kernel driver in use: uhci_hcd00:1d.2 Class 0c03: Device 8086:27ca (rev 02)
Subsystem: Device 8086:202c
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 3060 [size=32]
Kernel driver in use: uhci_hcd00:1d.3 Class 0c03: Device 8086:27cb (rev 02)
Subsystem: Device 8086:202c
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 3040 [size=32]
Kernel driver in use: uhci_hcd00:1d.7 Class 0c03: Device 8086:27cc (rev 02) (prog-if 20)
Subsystem: Device 8086:202c
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at d0300400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci00:1e.0 Class 0604: Device 8086:2448 (rev e2) (prog-if 01)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Capabilities: <access denied>00:1f.0 Class 0601: Device 8086:27bc (rev 02)
Subsystem: Device 8086:202c
Flags: bus master, medium devsel, latency 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich00:1f.2 Class 0106: Device 8086:27c1 (rev 02) (prog-if 01)
Subsystem: Device 8086:202c
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 43
I/O ports at 30c8 [size=8]
I/O ports at 30dc [size=4]
I/O ports at 30c0 [size=8]
I/O ports at 30d8 [size=4]
I/O ports at 3020 [size=16]
Memory at d0300000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci00:1f.3 Class 0c05: Device 8086:27da (rev 02)
Subsystem: Device 8086:202c
Flags: medium devsel, IRQ 9
I/O ports at 3000 [size=32]02:00.0 Class 0200: Device 8086:10d3
Subsystem: Device 8086:202c
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at d0120000 (32-bit, non-prefetchable) [size=128K]
Memory at d0100000 (32-bit, non-prefetchable) [size=128K]
I/O ports at 2000 [size=32]
Memory at d0140000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: e1000e03:00.0 Class 0106: Device 1b4b:9215 (rev 11) (prog-if 01)
Subsystem: Device 1b4b:9215
Flags: bus master, fast devsel, latency 0, IRQ 44
I/O ports at 1028 [size=8]
I/O ports at 1034 [size=4]
I/O ports at 1020 [size=8]
I/O ports at 1030 [size=4]
I/O ports at 1000 [size=32]
Memory at d0000000 (32-bit, non-prefetchable) [size=2K]
Expansion ROM at d0a00000 [disabled] [size=256K]
Capabilities: <access denied>
Kernel driver in use: ahci
-
hello im new on forum, i'am Alex.
-
1
-
Link down/up eth DSM 6.2.1
in DSM 6.x
Posted
I have that same problem (link down link /link up ) but only in one configuration, when i have download torrent, and this same time watch movie from DLNA (media serwer), and i'ts not hardwarde problem, no resucers etc. then can be torrent download at 1kb, 1 peer, and watch 360p movie , when LAN connection is at 100kbps, and boom link down, link up ;/ I test me LAN and it's work at full gigabit sped, i copy 8TB of data and nothing happen, no link down.
intel D2500CC DS1019+
Gigabit LAN Intel 82574L
DSM 6.2.2-24922 Update 4