[RedPill - the new loader for 6.2.4 - Discussion]

1 minute ago, buggy25200 said:

 

Vezérlőpulton => frissítés és visszaállítás => DSM frissítés => frissítési beállítás, a jövőbeni kéretlen frissítés elkerülése érdekében, ha még nem tette meg, jobb az első opciót bejelölni: Értesítsen és döntsem el, hogy telepítem-e az újat frissítés

 

 

Thank you @buggy25200, I have set it up.

[RedPill - the new loader for 6.2.4 - Discussion]

1 hour ago, rok1 said:

Synology is sending out updates during the install process. If you are having issues installing fine and then the first reboot it wants to migrate, you need to cut your internet or block synology's servers.

 

Ran into this issue last night working on a DS3617 box

OMG!!! It's working!
Thanks!

[RedPill - the new loader for 6.2.4 - Discussion]

4 minutes ago, buggy25200 said:

root not matched with junior
you must boot with the correct version of loader. If you try to update to 701u2 you have to read my previous post.

Envoyé de mon ONEPLUS A6003 en utilisant Tapatalk
 

I do not want to upgrade to 7.0.1-42218u2.
I generated 7.0.1-42218 with the loader and the .pat file is 7.0.1-42218.

[RedPill - the new loader for 6.2.4 - Discussion]

42 minutes ago, buggy25200 said:

@apiros

Can you PM me result of  

cat /var/log/junior

cat /var/log/message

Thx

Hi @buggy25200,

PM sent.

[RedPill - the new loader for 6.2.4 - Discussion]

 

12 hours ago, buggy25200 said:

Hello @apiros

 

There was a dependency problem with the dpkg package that is not present with the pocopico's tool .
This dependency was removed which caused the impossibility of generating an image for ds3617xs.
However I send an alternative two days ago on the develop branch https://github.com/jimmyGALLAND/redpill-load .
You can try and make your feedback

Hi @buggy25200,

 

I use debian 8, not tinycore. I have tried tinycore and it gives the same error.

I created the LKM based on the broadwell, then created the image. In both cases I used the develop branch of jimmyGalland.

 

I used Proxmox, created the VM as it should be. After starting the VM, it loads up to the point where I can upload the .pat file and apparently the installation runs successfully. 

On Serial port I see that it never loads the DSM anymore and throws some errors while loading modules.

 

Can not detect ADT device, Retry: 1...
:: Unloading module adt7475[   16.314441] Module [adt7475] is removed. 
 ... [  OK  ]
:: Unloading module i2c-i801[   16.325348] Module [i2c_i801] is removed. 
 ... [FAILED]
:: Loading module adt7475 ... [  OK  ]
Can not detect ADT device, Retry: 2...
:: Unloading module adt7475[   18.350807] Module [adt7475] is removed. 
 ... [  OK  ]
:: Unloading module i2c-i801[   18.360369] Module [i2c_i801] is removed. 
 ... [FAILED]
:: Loading module adt7475 ... [  OK  ]
Can not detect ADT device, Retry: 3...
:: Unloading module adt7475[   20.386502] Module [adt7475] is removed. 
 ... [  OK  ]
:: Unloading module i2c-i801[   20.398994] Module [i2c_i801] is removed. 
 ... [FAILED]

[RedPill - the new loader for 6.2.4 - Discussion]

Hi Guys!

 

Last week did anything change with the DS3617xs loader on the jimmyGalland repo? 
I was able to create a working image then, since then it's not working.

[RedPill - the new loader for 6.2.4 - Discussion]

2 hours ago, akh1 said:

error with new loader

 

 

 

 

How to solve this ?

 

I have the same error under proxmox with DSM918+.

When I try to load the DSM3615xs 6.2.4-25556, it works, all the others do not.