diglam
-
Posts
5 -
Joined
-
Last visited
Posts posted by diglam
-
-
7 minutes ago, IG-88 said:
did you try to use 3615 instead of 918+?
i've read complains lately that 918+ over all delvers less performace then 3615/17
No, will try now.
-
On 9/26/2020 at 12:04 AM, diglam said:
I have similar problem with Realtek 8168 on TerraMaster F2-421.
I installed by using extra.lzma/extra2.lzma for loader 1.04b ds918+ DSM 6.2.3 v0.13.3 and everything seems ok except network speed.
Speed is unstable and slow:
admin@NasBoss:/$ iperf3 -c 10.10.2.51 Connecting to host 10.10.2.51, port 5201 [ 5] local 10.10.2.11 port 35010 connected to 10.10.2.51 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.08 sec 29.0 MBytes 226 Mbits/sec 0 214 KBytes [ 5] 1.08-2.00 sec 10.0 MBytes 90.8 Mbits/sec 0 214 KBytes [ 5] 2.00-3.00 sec 9.36 MBytes 78.5 Mbits/sec 0 214 KBytes [ 5] 3.00-4.00 sec 34.6 MBytes 290 Mbits/sec 0 214 KBytes [ 5] 4.00-5.00 sec 91.9 MBytes 771 Mbits/sec 0 214 KBytes [ 5] 5.00-6.00 sec 11.1 MBytes 92.9 Mbits/sec 0 151 KBytes [ 5] 6.00-7.00 sec 8.75 MBytes 73.4 Mbits/sec 0 212 KBytes [ 5] 7.00-8.00 sec 14.9 MBytes 125 Mbits/sec 0 212 KBytes [ 5] 8.00-9.00 sec 63.1 MBytes 530 Mbits/sec 0 111 KBytes [ 5] 9.00-10.00 sec 79.0 MBytes 663 Mbits/sec 0 211 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 352 MBytes 295 Mbits/sec 0 sender [ 5] 0.00-10.00 sec 351 MBytes 294 Mbits/sec receiver iperf Done.admin@NasBoss:/$ iperf3 -s ----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- Accepted connection from 10.10.2.51, port 58149 [ 5] local 10.10.2.11 port 5201 connected to 10.10.2.51 port 58150 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 16.2 MBytes 136 Mbits/sec [ 5] 1.00-2.00 sec 6.62 MBytes 55.6 Mbits/sec [ 5] 2.00-3.00 sec 3.55 MBytes 29.8 Mbits/sec [ 5] 3.00-4.00 sec 2.53 MBytes 21.2 Mbits/sec [ 5] 4.00-5.00 sec 34.3 MBytes 288 Mbits/sec [ 5] 5.00-6.00 sec 10.9 MBytes 91.2 Mbits/sec [ 5] 6.00-7.00 sec 3.98 MBytes 33.4 Mbits/sec [ 5] 7.00-8.00 sec 32.0 MBytes 269 Mbits/sec [ 5] 8.00-9.00 sec 2.59 MBytes 21.7 Mbits/sec [ 5] 9.00-10.00 sec 75.6 MBytes 634 Mbits/sec [ 5] 10.00-10.14 sec 8.72 MBytes 539 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.14 sec 197 MBytes 163 Mbits/sec receiverDid I use wrong drive extension?
Terramaster F2-421 has 4 lan port 2xRealtek 8111F (uses r8168 driver) and 2xRealtek 8152 (uses r8153 driver).
I enabled other 2 Realtek 8152 (r8153) lan ports and tested them, they behaves same like r8168.
During playing settings I noticed something strange; if I change MTU (value doesn't matter) value of LAN port on Control Panel of DSM, iperf3 reports full gigabit speed (around 949 Mbits/sec) of lan port initially. But after DSM restarts somethings (maybe some services???) again reports slow and unstable speeds.
----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- Accepted connection from 10.10.2.51, port 59879 [ 5] local 10.10.2.12 port 5201 connected to 10.10.2.51 port 59885 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 108 MBytes 905 Mbits/sec [ 5] 1.00-2.00 sec 113 MBytes 949 Mbits/sec [ 5] 2.00-3.00 sec 113 MBytes 949 Mbits/sec [ 5] 3.00-4.00 sec 113 MBytes 949 Mbits/sec [ 5] 4.00-5.00 sec 111 MBytes 933 Mbits/sec [ 5] 5.00-6.00 sec 63.0 MBytes 528 Mbits/sec [ 5] 6.00-7.00 sec 10.6 MBytes 89.2 Mbits/sec [ 5] 7.00-8.00 sec 23.0 MBytes 193 Mbits/sec [ 5] 8.00-9.00 sec 2.23 MBytes 18.7 Mbits/sec [ 5] 9.00-10.00 sec 8.79 MBytes 73.8 Mbits/sec [ 5] 10.00-10.20 sec 156 KBytes 6.39 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.20 sec 666 MBytes 548 Mbits/sec receiver ----------------------------------------------------------- Server listening on 5201 -----------------------------------------------------------I booted F2-421 with Terramaster's official TOS and Manjaro live USB, then repeated iperf3 tests. All 4 ports of device were OK and gives full gigabit speed. So there is no hardware problem.
I really need help, please.
Thanks.
-
Hi,
I also installed on F2-421 but I'm getting slow and unstable lan speeds, how is yours?
Could you please test with iperf3?
-
On 8/27/2020 at 6:32 PM, T-REX-XP said:
Anybody has realtek 8168 network card?? I have faced with some issue on the last extra.lzma(13.3), the maximum speed of copying one big file is 17MB/s via the samba.
Also I have tried USB 3 network adapter, with the same file and cable and receive 70-80 MB/s It looks very strange for me. The system shows connection speed as 1000Mbps,Full duplex, MTU 2000
Here is some details about hardware:
0000:03:00.0 Class 0200: Device 10ec:8168 (rev 15) Subsystem: Device 1b0a:01a5 Flags: bus master, fast devsel, latency 0, IRQ 90 I/O ports at d000 [size=256] Memory at d0604000 (64-bit, non-prefetchable) [size=4K] Memory at d0600000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Endpoint, MSI 01 Capabilities: [b0] MSI-X: Enable- Count=4 Masked- Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Capabilities: [160] Device Serial Number 01-00-00-00-68-4c-e0-00 Capabilities: [170] Latency Tolerance Reporting Capabilities: [178] L1 PM Substates Kernel driver in use: r8168I have similar problem with Realtek 8168 on TerraMaster F2-421.
I installed by using extra.lzma/extra2.lzma for loader 1.04b ds918+ DSM 6.2.3 v0.13.3 and everything seems ok except network speed.
Speed is unstable and slow:
admin@NasBoss:/$ iperf3 -c 10.10.2.51 Connecting to host 10.10.2.51, port 5201 [ 5] local 10.10.2.11 port 35010 connected to 10.10.2.51 port 5201 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.08 sec 29.0 MBytes 226 Mbits/sec 0 214 KBytes [ 5] 1.08-2.00 sec 10.0 MBytes 90.8 Mbits/sec 0 214 KBytes [ 5] 2.00-3.00 sec 9.36 MBytes 78.5 Mbits/sec 0 214 KBytes [ 5] 3.00-4.00 sec 34.6 MBytes 290 Mbits/sec 0 214 KBytes [ 5] 4.00-5.00 sec 91.9 MBytes 771 Mbits/sec 0 214 KBytes [ 5] 5.00-6.00 sec 11.1 MBytes 92.9 Mbits/sec 0 151 KBytes [ 5] 6.00-7.00 sec 8.75 MBytes 73.4 Mbits/sec 0 212 KBytes [ 5] 7.00-8.00 sec 14.9 MBytes 125 Mbits/sec 0 212 KBytes [ 5] 8.00-9.00 sec 63.1 MBytes 530 Mbits/sec 0 111 KBytes [ 5] 9.00-10.00 sec 79.0 MBytes 663 Mbits/sec 0 211 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 352 MBytes 295 Mbits/sec 0 sender [ 5] 0.00-10.00 sec 351 MBytes 294 Mbits/sec receiver iperf Done.admin@NasBoss:/$ iperf3 -s ----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- Accepted connection from 10.10.2.51, port 58149 [ 5] local 10.10.2.11 port 5201 connected to 10.10.2.51 port 58150 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 16.2 MBytes 136 Mbits/sec [ 5] 1.00-2.00 sec 6.62 MBytes 55.6 Mbits/sec [ 5] 2.00-3.00 sec 3.55 MBytes 29.8 Mbits/sec [ 5] 3.00-4.00 sec 2.53 MBytes 21.2 Mbits/sec [ 5] 4.00-5.00 sec 34.3 MBytes 288 Mbits/sec [ 5] 5.00-6.00 sec 10.9 MBytes 91.2 Mbits/sec [ 5] 6.00-7.00 sec 3.98 MBytes 33.4 Mbits/sec [ 5] 7.00-8.00 sec 32.0 MBytes 269 Mbits/sec [ 5] 8.00-9.00 sec 2.59 MBytes 21.7 Mbits/sec [ 5] 9.00-10.00 sec 75.6 MBytes 634 Mbits/sec [ 5] 10.00-10.14 sec 8.72 MBytes 539 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.14 sec 197 MBytes 163 Mbits/sec receiverDid I use wrong drive extension?
Driver extension jun 1.03b/1.04b for DSM6.2.3 for 918+ / 3615xs / 3617xs
in Additional Compiled Modules
Posted
I tried to use 3615 with jun's 1.03b bootloader without changing anything and below the results:
----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- Accepted connection from 10.10.2.51, port 53179 [ 5] local 10.10.2.11 port 5201 connected to 10.10.2.51 port 53180 [ ID] Interval Transfer Bitrate [ 5] 0.00-1.00 sec 65.2 MBytes 547 Mbits/sec [ 5] 1.00-2.06 sec 100 MBytes 797 Mbits/sec [ 5] 2.06-3.00 sec 84.2 MBytes 748 Mbits/sec [ 5] 3.00-4.00 sec 90.0 MBytes 755 Mbits/sec [ 5] 4.00-5.00 sec 98.6 MBytes 827 Mbits/sec [ 5] 5.00-6.00 sec 108 MBytes 909 Mbits/sec [ 5] 6.00-7.00 sec 113 MBytes 949 Mbits/sec [ 5] 7.00-8.02 sec 110 MBytes 906 Mbits/sec [ 5] 8.02-9.00 sec 92.3 MBytes 788 Mbits/sec [ 5] 9.00-10.00 sec 109 MBytes 913 Mbits/sec [ 5] 10.00-10.17 sec 14.5 MBytes 707 Mbits/sec - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate [ 5] 0.00-10.17 sec 985 MBytes 813 Mbits/sec receiver ----------------------------------------------------------- Server listening on 5201 ----------------------------------------------------------- Accepted connection from 10.10.2.51, port 53181 [ 5] local 10.10.2.11 port 5201 connected to 10.10.2.51 port 53182 [ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 109 MBytes 916 Mbits/sec 0 479 KBytes [ 5] 1.00-2.00 sec 113 MBytes 950 Mbits/sec 0 529 KBytes [ 5] 2.00-3.00 sec 113 MBytes 949 Mbits/sec 0 540 KBytes [ 5] 3.00-4.00 sec 111 MBytes 931 Mbits/sec 0 572 KBytes [ 5] 4.00-5.00 sec 112 MBytes 939 Mbits/sec 0 586 KBytes [ 5] 5.00-6.00 sec 106 MBytes 886 Mbits/sec 0 593 KBytes [ 5] 6.00-7.00 sec 113 MBytes 947 Mbits/sec 0 597 KBytes [ 5] 7.00-8.00 sec 113 MBytes 952 Mbits/sec 0 606 KBytes [ 5] 8.00-9.00 sec 113 MBytes 948 Mbits/sec 0 615 KBytes [ 5] 9.00-10.00 sec 82.0 MBytes 688 Mbits/sec 0 500 KBytes - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 1.06 GBytes 910 Mbits/sec 0 sender ----------------------------------------------------------- Server listening on 5201 -----------------------------------------------------------Not perfect but better.