mpluser
-
Posts
5 -
Joined
-
Last visited
Posts posted by mpluser
-
-
Some updates :
Just to avoid any problems with my settings/tools, I used the same image (1.02b MBR) , same Usb device for another PC.
Just changing the MAC in the image, worked like a charm for second PC.
I have no clue why is not working with my first PC.
-
Hi IG-88,
thanks for confirmation.
Extra lzma V4.8 , MBR tried too. Just in case , 3 USB sticks were tried with the same result.
This motherboard has no serial port, i can't check it.
Is the NO serial port and issue in booting process?
-
Hi,
the motherboard is with LGA775 CPU and without AHCI support for SATA, i would go with loader 1.02b and DSM 6.1.x.
NIC VID is 14e4:1690
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e30] (rev 03)
00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e32] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition Audio Controller [8086:27d8] (rev 01)
00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 1 [8086:27d0] (rev 01)
00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 01)
00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9] (rev 01)
00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca] (rev 01)
00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb] (rev 01)
00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 01)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01)
00:1f.2 IDE interface [0101]: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] [8086:27c0] (rev 01)
00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 01)
01:00.0 Ethernet controller [0200]: Broadcom Limited NetXtreme BCM57760 Gigabit Ethernet PCIe [14e4:1690] (rev 01) -
Hi All,
Could you please add support for Broadcom NetXream bcm57760 NIC?
The MB is from an Imedia S1800, basically is an ACER Verition M275.
The NIC model was checked with a ubuntu live usb to make sure is correct.
Thx
Grub Boot Menu Default Value Changer for Tinycore Redpill
in Software Modding
Posted
Hi all,
I had a bad luck trying to install DSM7.x on an old hardware.
I have a MB with ICH7 chipset an a heavily trimmed BIOS with no option to set SATA to AHCI.
It would be workaround to edit grub.cfg and setpci -s 0:1f.2 90.b=40 but I have no clue how to do it in TCRP.
Please advise,
Thx