[Driver extension jun 1.03b/1.04b for DSM6.2.3 for 918+ / 3615xs / 3617xs]

On 7/17/2020 at 12:01 AM, mosaati said:

Glad it worked.

All thanks goes to IG-88 for creating the modification. 

I have been using it since and no problems so far. 

My 10500 core graphics card currently only displays load drivers, but it doesn't decode at all

[Driver extension jun 1.03b/1.04b for DSM6.2.3 for 918+ / 3615xs / 3617xs]

6 hours ago, EVOTk said:

The folder /dev/dri has 666 permissions?

chmod 666 /dev/dri/renderD128

and restart Jellyfin

I checked renderD128, which by default is 0666.I have tried it according to your method, but the fault still exists. Thank you for your help

[Driver extension jun 1.03b/1.04b for DSM6.2.3 for 918+ / 3615xs / 3617xs]

6 hours ago, IG-88 said:

could you try synologys videostation for transcoding with this patch?

https://xpenology.com/forum/topic/24864-transcoding-without-a-valid-serial-number/

I just tried a patch with The Synologys VideoStation, which played directly, but the transcoding didn't work and the display stayed loaded, and I tried to transcode with Jellyfin and failed

[Driver extension jun 1.03b/1.04b for DSM6.2.3 for 918+ / 3615xs / 3617xs]

11 hours ago, IG-88 said:

 

 

that helps, i know whats wrong

i updated the link in the 1st thread to a new "mod2" version, please download and try again

I915.ko has been replaced with mod2 and the kernel display has been shown to be driven via LS /dev/dri.However, it seems that kernel display cannot be used for transcoding in EMBY. Emby authorization has been obtained, and the video file is an 11G MKV file.Hope to get your answer, thank you very much

[Driver extension jun 1.03b/1.04b for DSM6.2.3 for 918+ / 3615xs / 3617xs]

2 minutes ago, mosaati said:

Yeah. This is the same what I got at first but the IG-88 re-compiled the file and it worked after that. I guess you have to wait for him to be able to answer. Sorry I couldn't be of more help. 

Thank you very much for your answer, thank you

[Driver extension jun 1.03b/1.04b for DSM6.2.3 for 918+ / 3615xs / 3617xs]

1 hour ago, mosaati said:

Since I dealt with this I'll try to help with how it worked for me but I'm no IG-88 so I can't give you a solution if it doesn't work. 

 

My process was:

1. Put the i915.ko file in /usr/lib/modules. 

2. Change the file ownership and permissions to be root. 

3. Run the command 

sudo insmod /usr/lib/modules/i915.ko

Post the output here. 

4. Reboot and post the output here from /var/log/dmesg

after rebooted. 

5. Run the command 

sudo insmod /usr/lib/modules/i915.ko

Again after reboot and post the output here. It's probably redundant to do so but just to double check. 

I according to your operation, at the time of the third run this command prompt me: insmod: ERROR: could not insert the module/usr/lib/modules/i915 ko: Key was rejected by the service, what should I do, thank you for your answer 

[Driver extension jun 1.03b/1.04b for DSM6.2.3 for 918+ / 3615xs / 3617xs]

I am sorry for my use of translation assistant. Please forgive me if I use the wrong words My hardware configuration is CPU: I5-10500 and motherboard is ASROCK B460 PRO.Using the KO (9BC8) file you published, ls /dev/dri still shows No such file or directory, it seems that the driver file is not effective, I send it back to you, I hope it can be helpful to you, thank you for your efforts