I installed DSM 6.2.2 for a DS3615 with jun's loader 1.03b on the following hardware:
- ASRock Rack C226M WS with
- integrated Intel I210 and I217 network adapters
- Intel i5 4570TE
- 4GB ECC RAM
I adjusted the grub.cfg for the USB stick's VID&PID, the NIC's MAC addresses and the serial number Everything seems to be working well except for wake on LAN, which is enabled in the BIOS and DSM. When I shut down DSM the system restarts after a few seconds. In Windows I would enable "Magic Packet" in the driver of the NIC but there is no such option in DSM.
I already tried to find out the WOL status via putty by typing "ethertool eth0" or eth1, but this returns just a "Cannot get wake-on-lan settings: Operation not permitted".
What I also observed: when I shut down the pc by pressing the power button, the system does not seem to restart (at least for a couple of minutes before I proceeded with testing...).
Do you have any idea what I could try to get WOL running properly with activation by a magic packet only?
Wake on LAN - magic packet
in General Post-Installation Questions/Discussions (non-hardware specific)
Posted
Hi guys,
I installed DSM 6.2.2 for a DS3615 with jun's loader 1.03b on the following hardware:
- ASRock Rack C226M WS with
- integrated Intel I210 and I217 network adapters
- Intel i5 4570TE
- 4GB ECC RAM
I adjusted the grub.cfg for the USB stick's VID&PID, the NIC's MAC addresses and the serial number Everything seems to be working well except for wake on LAN, which is enabled in the BIOS and DSM. When I shut down DSM the system restarts after a few seconds. In Windows I would enable "Magic Packet" in the driver of the NIC but there is no such option in DSM.
I already tried to find out the WOL status via putty by typing "ethertool eth0" or eth1, but this returns just a "Cannot get wake-on-lan settings: Operation not permitted".
What I also observed: when I shut down the pc by pressing the power button, the system does not seem to restart (at least for a couple of minutes before I proceeded with testing...).
Do you have any idea what I could try to get WOL running properly with activation by a magic packet only?
Thanks - appreciate your help