Jump to content
XPEnology Community

bimmermad321

Transition Member
  • Posts

    6
  • Joined

  • Last visited

Posts posted by bimmermad321

  1. 2 hours ago, Polanskiman said:

    In principale yes. DSM 6.1.7 update 3 being the max you can update to with loader v1.02b.

    Thank you so much guys.

     

    So my main issue was that my NIC was not being recognised after installing the 6.1.4. The issue i had was that my bios was outdated on my n54l and i had to update the bios to the 2013 version. This then allowed my NIC to be recognised by the bootloader. once again thanks for all the help.

    • Like 1
  2. 33 minutes ago, bearcat said:

    Make a new USB stick, with 1.02b (for DS3615xs)

    Download this .pat file, and try doing a manual install with it:

    https://archive.synology.com/download/DSM/release/6.1.7/15284/DSM_DS3615xs_15284.pat

     

    Hi Thank you or your reply. I have just reinstalled the 6.1.4 manually and managed to get everything working. Thank you so much for your help. Can i just update straight to 6.1.7 the same way as i installed 6.1.4 through a manual install?

  3. 1 minute ago, bearcat said:

    @Bimmermad I'm just *guessing* here,

    but you might have been getting a .PAT that is not compatible with your network card.

    The latest working DSM on your internal nic would be 6.1.7-15284 Update 3.

    If you by any chance installed any newer version, you must either downgrade or add a supported nic.

    Yes i am trying to use 6.1.7 but my nic is only recognised at first boot. After it installs/migrates then reboots I am unable to see it n my network 

  4. 1 hour ago, bearcat said:

    @Bimmermad Just to be sure,

    1 - what bootloader did you use on your USB stick,

    2 - did you provide the .PAT file manually, or was it automaticly downloaded from Synology during the upgrade process?

     

    Thank you for responding

     

    I used the 102b lootloader

     

    I did not. Provide a. PAT file I think I may have done wrong there how can I solve this? 

  5. 3 hours ago, Polanskiman said:

    By updating the bios you meant disabling CE1?

    Hi yes thanks sorry for not mentioning it. I am using juns 102b bootloader and I have disabled ce1. I had to update the bios as mine was very out of date and had to use the sp664 from hp

  6. Hi I am running the hp n54l proliant and was running 5.2 for many years. I decided to update to the 6.1 using Juns guide. After many failed attempts I realised I need to update the bios which I did. After installing the bios 6.1 was being found on the Lan. But only at first boot. After going through fresh install or migrate the system reboots and Lan is not found after that. I am struggling to find out what it could be. I have tried to do a fresh install on a new HDD but still the same issue. Really need some help please it will be much appreciated. 

×
×
  • Create New...