usus
-
Posts
10 -
Joined
-
Last visited
Posts posted by usus
-
-
-
Anyone use this type of controller?
Does support HDD with capacity bigger that 2 TB?
-
21 hours ago, bearcat said:
btw: if you replace your P410 with a 2 or 4 port "standard" SATA controller, with native support, your problems would be over
I have a Q1900-ITX running myself, with an added 2port SATA controller in a microPCIe slot, giving me a total of 6 ports.
I was thinking to this but firs i try to use hardware that i have. 4 port sata adapter are not so cheap.(same price like a second hand raid controller)
Can you tel me what model are u using?
23 hours ago, usus said:I just found
Hope is working.
Unfortunately dose not work. I try extra.lzma for DS918+ v0.2, v0.3, v0.4, v0.5_test and after startup the link of my network card switch off.
-
Or u can try something like this
-
14 minutes ago, bearcat said:
@usus Would that be the HP smart array P410i ?
What is the rest of your HW setup, and what OS are you currently using?
I did write at the beginning of the post.
Board + CPU: Asrock Q1900M
Ram: 16GB (2 x 8GB, Kingston HyperX Fury Blue, DDR3 )
Raid Controler :HP Smart Array P400 Controller
Network: Intel PRO/1000 PT Dual Port ServerCurelntly I am running a Hyper-V with windows and linux VM-s
14 minutes ago, bearcat said:If, and I say IF, you want to try any of the "extras" out, make sure you have a full backup set
Same thing goes for you current Raid1, assuming it is a HW raid you will not be able to "import" the raidset into DSM.
With XPEnology/DSM, you will be using software raid.
I know. But first to see the disks in DSM I will not format them on install
-
I just found
Hope is working.
-
1 minute ago, bearcat said:
@usus The HP P400 is a SAS Raid controller if I'm not wrong. how is the drives configured?
You might need to configure them as single drives, preferably AHCI (if possible).
I have 3x3TB drives
2 drives in raid 1
1 single drive
For the moment my system is running for ~5 years.
I have done lot of tests in this time.
Now I read about XPEnology and i want to migrate but with minimum of shutdown time.
I will not reconfigure until i do not have a solution.
And sorry for the mistake but is a HP smart array P410 controller
-
3 hours ago, Olegin said:
Try 6.1.7 on 1.02b loader wiht this extra.lzma.
I just try but doesn`t work.
I install also on a spare drive connected on the main board but still didn't see the HP Array Controller.
-
I am trying to install XPEnology 6.x on my system but i can't make it run.
1. Running XPEnology on bare metal - did not see my Hp p400 array
2. Running on ESX is not an option because can not be install on my board.Any idea?
Curelntly I am running a Hyper-V with windows and linux VM-s
My system:
Board + CPU: Asrock Q1900M
Ram: 16GB (2 x 8GB, Kingston HyperX Fury Blue, DDR3 )
Raid Controler :HP Smart Array P400 Controller
Network: Intel PRO/1000 PT Dual Port Server
BIOS file for DS416play
in Hardware Modding
Posted
What do you mean by BIOS ?
Blue led is flashing?