[gnoboot & DSM 5.0-4482 - Experiences?]

Well that was fast

 

Congrats on the temp patch everyone... Am gonna hold back from installing in my main Nas for now, but will test on VMware and revert!!!

 

Sent from my GT-I9300 using Tapatalk

[Power off from the buttom]

Any hint how to make this (post from darkstar) work in gnoboot 10.5?

 

The method mentioned in first page works for me in gnoboot 10.5

 

Sent from my GT-I9300 using Tapatalk

[No gigabit ethernet in gnoboot based build. Help needed!]

If your having troubles getting gigabit working.... Try a different cable.

 

9 times out of ten... Auto detect will down negotiate to 100m if it detects a problem.

 

.

 

Thats exactly what happened... Changed cables yesterday and it got resolved forgot to update here...

 

Sent from my GT-I9300 using Tapatalk

[No gigabit ethernet in gnoboot based build. Help needed!]

@davurleon

 

Yours is also the same realtek chip? What version of gnoboot are you using?

[XPEnology gnoBoot]

*removed* wrong post

[No gigabit ethernet in gnoboot based build. Help needed!]

thank you... i have posted on gnoboot's thread.

 

In the meantime any ideas how to load r8169 instead of r8168??

[No gigabit ethernet in gnoboot based build. Help needed!]

guys, any help would be appreciated!!!

[No gigabit ethernet in gnoboot based build. Help needed!]

hello guys,

 

this is my first post here, and hope you guys could help me.

 

i'm running the latest dsm 5.0 with gnoboot's latest alpha, on a biostar amd e350 based fusion board setup.

 

everything works fine, except gigabit ethernet. the ethernet speed is 100mbps and not gigabit/1000mbps.

 

The motherboard onboard lan is rtl8111f ethernet.

 

dmesg | grep 'Ethernet driver'

 

[    5.429584] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    5.444419] 8139too: 8139too Fast Ethernet driver 0.9.28
[    5.461712] r8168 Gigabit Ethernet driver 8.037.00-NAPI loaded
[    5.716187] Brocade 10G Ethernet driver - version: 3.0.2.2

 

ethtool eth0

        Supported ports: [ TP ]
       Supported link modes:   10baseT/Half 10baseT/Full
                               100baseT/Half 100baseT/Full
                               1000baseT/Full
       Supports auto-negotiation: Yes
       Advertised link modes:  10baseT/Half 10baseT/Full
                               100baseT/Half 100baseT/Full
                               1000baseT/Full
       Advertised auto-negotiation: Yes
       Speed: 100Mb/s
       Duplex: Full
       Port: Twisted Pair
       PHYAD: 0
       Transceiver: internal
       Auto-negotiation: on
       Supports Wake-on: pumbg
       Wake-on: d
       Current message level: 0x00000033 (51)
       Link detected: yes

 

i think the newer r8169 driver supports Gigabit ethernet on the RTL8111F chip, but i do not know how to load r8169 instead of r8168.

 

any suggestions would be much appreciated

 

Thanks