[Issue: Serial USB > VM (ESXi) DS3622xs + DSM 7.1-42661 [HP MS Gen8]+ Zigbee KEY [Sonoff ZigBee 3.0 USB Dongle Plus ]]

 

I close the topic as solved. I solved by manually installing the drivers for broadwellnk architecture [DSM 7.1]:

https://github.com/robertklep/dsm7-usb-serial-drivers

Results:

Admin@G-Server:~$ lsusb
|__usb1          1d6b:0002:0404 09  2.00  480MBit/s 0mA 1IF  (ehci_hcd 0000:02:01.0) hub
|__usb2          1d6b:0002:0404 09  2.00  480MBit/s 0mA 1IF  (Linux 4.4.180+ xhci-hcd xHCI Host Controller 0000:0b:00.0) hub
  |__2-1         10c4:ea60:0100 00  2.00   12MBit/s 100mA 1IF  (ITead Sonoff Zigbee 3.0 USB Dongle Plus c02fdef00160ec11843c345f25bfaa52)
|__usb3          1d6b:0003:0404 09  3.00 5000MBit/s 0mA 1IF  (Linux 4.4.180+ xhci-hcd xHCI Host Controller 0000:0b:00.0) hub


Admin@G-Server:~$ ls /dev/ttyU*
/dev/ttyUSB0

The dongleUSB is correctly recognized as ttyUSB0 and used in a Zigbee2Mqtt container

[Issue: Serial USB > VM (ESXi) DS3622xs + DSM 7.1-42661 [HP MS Gen8]+ Zigbee KEY [Sonoff ZigBee 3.0 USB Dongle Plus ]]

hi all,

I have a system as follows:
1) Xeon 4core / 8th
2) 16gb ram PC12800e
3) Bootloader DS3622xs + Redpill TinyCore
4) DSM 7.1-42661 

Based on: Proliant MS Gen8

 

I can't get DSM to recognize the usb dongle. I tried to:

Sonoff Zigbee 3.0 usb dongle plus

 

1) install the drivers from the store: SynoKernel USB Serial drivers, but the key is detected with "lsusb" but not identified as ttyU * or ttyS *

 

2) start the commands:

/sbin/modprobe usbserial

/sbin/modprobe ftdi_sio

/sbin/modprobe cdc-acm chmod 777 / dev / ttyUSB0 chmod 777 / dev / ttyACM0

but that didn't work

 

3)I wanted to try this method: https://mariushosting.com/synology-how-to-add-usb-support-on-dsm-7/ but i can't download the ftiver compiled for architecture: broadwellnk but the site: www.jadahl.com has been offline for some time. could someone pass me drivers? link

 

 

or tell me how it solved? thank you

 

[DS3622xs DSM 7.1 USB support with RedPill Tinycore]

On 9/21/2022 at 9:08 PM, coolinx said:

Ok, I found a fix and a potential workaround for this:

I successfully used the fix proposed in this French topic:

https://xpenology.com/forum/topic/18601-tuto-hp-n54l-gen7-dsm-7-et-dsm-623/

Which is translated to English here:
https://xpenology-com.translate.goog/forum/topic/18601-tuto-hp-n54l-gen7-dsm-7-et-dsm-623/page/1/?_x_tr_sl=auto&_x_tr_tl=en&_x_tr_hl=nl#comments

 

So you need this driver: ohci-hcd.ko and DS3615XS. I used DSM 7.1 and it works great for me.

With these instructions you can complete the process: https://mariushosting.com/synology-how-to-add-usb-support-on-dsm-7/

 

The workaround I have not completely tested, but it could work:

The cause of this issue is that DSM7 does not have a driver for the HP N54L Microserver USB 1.1 ports. So you see the 480Mbit devices, but not the 12Mbit. If you connect a USB2 hub to the server and connect the 12Mbit devices like Zwave, Zigbee sticks, they should show up with lsusb.

 

 

 

 

Hi coolinx, can you tell me exactly how you did it, I've been trying to get the usb sonoff zigbee on this system for two days:
DS3622xs
DSM 7.1
MS Gen8 [xeon 5c/4th]
RedPill 

and driver www.jadahl.com is offline

 

 

thx

[surveillance station 8]

Qualcuno ha qualche seriale per un synology originale?