Jump to content
XPEnology Community

JoeBlack2k

Rookie
 View Profile  See their activity

  • Posts

    1

  • Joined

  • Last visited

 Content Type 

Posts posted by JoeBlack2k

    XPEnology gnoBoot

    in DSM 5.2 and earlier (Legacy)

    Posted

    Latest GNO with Intel NUC,

     

    USB get's recognized as 2.0 still loads the xhci driver but uses the ehci driver ?

     

     

    00:00.0 Class 0600: Device 8086:0154 (rev 09)
Subsystem: Device 8086:2044
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:02.0 Class 0300: Device 8086:0166 (rev 09)
Subsystem: Device 8086:2044
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=3]
Expansion ROM at  [disabled]
Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
	Address: 00000000  Data: 0000
Capabilities: [d0] Power Management version 2
	Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
	AFCap: TP+ FLR+
	AFCtrl: FLR-
	AFStatus: TP-

00:16.0 Class 0780: Device 8086:1e3a (rev 04)
Subsystem: Device 8086:2044
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f7c2c000 (64-bit, non-prefetchable) [size=1]
Capabilities: [50] Power Management version 3
	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
	Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [8c] MSI: Enable- Count=1/1 Maskable- 64bit+
	Address: 0000000000000000  Data: 0000

00:19.0 Class 0200: Device 8086:1503 (rev 04)
Subsystem: Device 8086:2044
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0
Interrupt: pin A routed to IRQ 41
Region 0: Memory at f7c00000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f7c29000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at f080 [size=2]
Capabilities: [c8] Power Management version 2
	Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
	Address: 00000000fee0100c  Data: 4171
Capabilities: [e0] PCI Advanced Features
	AFCap: TP+ FLR+
	AFCtrl: FLR-
	AFStatus: TP-
Kernel driver in use: e1000e

00:1a.0 Class 0c03: Device 8086:1e2d (rev 04) (prog-if 20)
Subsystem: Device 8086:2044
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 	Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7c28000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
	Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
	AFCap: TP+ FLR+
	AFCtrl: FLR-
	AFStatus: TP-
Kernel driver in use: ehci_hcd

00:1b.0 Class 0403: Device 8086:1e20 (rev 04)
Subsystem: Device 8086:2044
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- 	Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 4
Region 0: Memory at f7c20000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
	Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
	Address: 0000000000000000  Data: 0000
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
	DevCap:	MaxPayload 128 bytes, PhantFunc 0
		ExtTag- RBE-
	DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
		RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
		MaxPayload 128 bytes, MaxReadReq 128 bytes
	DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
Capabilities: [100 v1] Virtual Channel
	Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
	Arb:	Fixed- WRR32- WRR64- WRR128-
	Ctrl:	ArbSelect=Fixed
	Status:	InProgress-
	VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
		Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
		Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
		Status:	NegoPending- InProgress-
	VC1:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
		Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
		Ctrl:	Enable+ ID=1 ArbSelect=Fixed TC/VC=22
		Status:	NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
	Desc:	PortNumber=0f ComponentID=00 EltType=Config
	Link0:	Desc:	TargetPort=00 TargetComponent=00 AssocRCRB- LinkType=MemMapped LinkValid+
		Addr:	00000000fed1c000

00:1d.0 Class 0c03: Device 8086:1e26 (rev 04) (prog-if 20)
Subsystem: Device 8086:2044
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 	Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7c27000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
	Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
	Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCI Advanced Features
	AFCap: TP+ FLR+
	AFCtrl: FLR-
	AFStatus: TP-
Kernel driver in use: ehci_hcd

00:1f.0 Class 0601: Device 8086:1e56 (rev 04)
Subsystem: Device 8086:2044
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- 	Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:1f.2 Class 0106: Device 8086:1e03 (rev 04) (prog-if 01)
Subsystem: Device 8086:2044
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 	Latency: 0
Interrupt: pin B routed to IRQ 40
Region 0: I/O ports at f0d0 [size=1]
Region 1: I/O ports at f0c0 [size=1]
Region 2: I/O ports at f0b0 [size=1]
Region 3: I/O ports at f0a0 [size=1]
Region 4: I/O ports at f060 [size=2]
Region 5: Memory at f7c26000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
	Address: fee0500c  Data: 4151
Capabilities: [70] Power Management version 3
	Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
	Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
Capabilities: [b0] PCI Advanced Features
	AFCap: TP+ FLR+
	AFCtrl: FLR-
	AFStatus: TP-
Kernel driver in use: ahci

00:1f.3 Class 0c05: Device 8086:1e22 (rev 04)
Subsystem: Device 8086:2044
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- 	Interrupt: pin C routed to IRQ 5
Region 0: Memory at f7c25000 (64-bit, non-prefetchable) [size=11]
Region 4: I/O ports at f040 [size=2]

     

     

    Also allot of errors:

     

    [ 1435.579735] dsmnotify.cgi[17761]: segfault at 0 ip 000000000804ccb8 sp 00000000fffeee00 error 6
[ 1459.540217] dsmnotify.cgi[19541]: segfault at 0 ip 000000000804ccb8 sp 00000000ffea6f00 error 6
[ 1466.538000] dsmnotify.cgi[20054]: segfault at 0 ip 000000000804ccb8 sp 00000000ffcfe0a0 error 6
[ 1490.512849] dsmnotify.cgi[21703]: segfault at 0 ip 000000000804ccb8 sp 00000000ffd13c40 error 6
[ 1498.510178] dsmnotify.cgi[22251]: segfault at 0 ip 000000000804ccb8 sp 00000000ff9d3aa0 error 6
[ 1523.484098] dsmnotify.cgi[24128]: segfault at 0 ip 000000000804ccb8 sp 00000000ff83dde0 error 6
[ 1529.468447] dsmnotify.cgi[24560]: segfault at 0 ip 000000000804ccb8 sp 00000000ffcfdea0 error 6
[ 1554.443824] dsmnotify.cgi[26298]: segfault at 0 ip 000000000804ccb8 sp 00000000ff9a4e50 error 6
[ 1561.439088] dsmnotify.cgi[26767]: segfault at 0 ip 000000000804ccb8 sp 00000000ffc00a50 error 6
[ 1586.404155] dsmnotify.cgi[28616]: segfault at 0 ip 000000000804ccb8 sp 00000000ff9efef0 error 6

×
×
  • Create New...