[Slow boot on GIGABYTE GA-J3455N-D3H and Jun's Loader v1.04b DS918+]

I just used real3x´s extra.lzma and did not delete the second one. Did fresh installation.

[DSM 6.2.1-23824 - WARNING]

- Outcome of the update: SUCCESSFUL

- DSM version prior update: DSM 6.2.1-23824 Update 4 -> DSM 6.2.1-23824 Update 6

- Loader version and model: JUN'S LOADER v1.04b - DS918+

- Using custom extra.lzma: NO

- Installation type: BAREMETAL - ASRock J4105  - 8GB RAM

- Additional comments: NONE

[8th gen i5 + Asrock H370M-ITX/ac works w/ DSM 6.2.1.23824]

On 2/4/2019 at 10:07 PM, killerame said:

@deman-13 wol is not working with my 6.2.1 (loader1.03b 3617xs).

both lan are working well but i cannot start xpenology from syno assist.

i do not know if there are some parameters to set in the bios

Yes wol needs to be activated in bios. I have j4105 and wol works. 

[8th gen i5 + Asrock H370M-ITX/ac works w/ DSM 6.2.1.23824]

Hi there,

 

can you please confirm if WOL works with the board ?

 

[8th gen i5 + Asrock H370M-ITX/ac works w/ DSM 6.2.1.23824]

Sorry for further bothering ) I had a look at both link and their boards has been set with GTX 1050 or 1080 cards, both consume 8w at idle in one of the links they additionally had 10Gb card, which is probably also 2-3W, so , it is back to less than 30W if nothing is additionally added to the card.

[8th gen i5 + Asrock H370M-ITX/ac works w/ DSM 6.2.1.23824]

further googling gives different results.... 37W https://www.tweaktown.com/reviews/8587/asrock-h370m-itx-ac-intel-h370-motherboard-review/index9.html
https://www.kitguru.net/components/motherboard/ryan-martin/asrock-h370m-itx-ac-motherboard-review/11/

 

probably it is ok for that board to drain 37W idle.

[8th gen i5 + Asrock H370M-ITX/ac works w/ DSM 6.2.1.23824]

16 minutes ago, Joe Bethersonton said:

It is also a bit more than I was hoping for, perhaps I can tweak the power consumption a bit by undervolting the cpu.

I will also start using the "Power Schedule" feature, or try and get WOL working.

 

On the positive side, the new system has so much more CPU, that I can consolidate my "servers". I have two Raspberry Pi's running 24/7, those services can now be run in Docker. I also pay for a VPS hosted in the cloud, which I no longer need.

I just googled a bit and found a link there they say 22w with i7 cpu. Wonder where other 15w come from for you.

https://www.tomshardware.co.uk/h370-b360-budget-coffee-lake-motherboard-roundup,review-34282-6.html

[8th gen i5 + Asrock H370M-ITX/ac works w/ DSM 6.2.1.23824]

I know it is lame to compare but my synology with 2 hdd eats 17w. My laptop with i5 and some drives around it eats 20w. I would not expect a system itself without hdd drives to eat up more than 20w while idle.

[8th gen i5 + Asrock H370M-ITX/ac works w/ DSM 6.2.1.23824]

9 minutes ago, Joe Bethersonton said:

 

My power-consumption-meter says 53W after boot with all drives spinning.

Wow.. 4 drives and it eats up 53W/h. If each drive is 4w. The system itself needs 37W while doing nothing...  unexpected 

[8th gen i5 + Asrock H370M-ITX/ac works w/ DSM 6.2.1.23824]

What is the power co sumption of your setup?

 

[Выбор железа]

On ‎01‎.‎12‎.‎2017 at 12:42 PM, Архип said:

Тов. постом выше же вам уже показал картинку, где два штекера специально, один цпу, второй для корпуса

 

корпус поддерживает 6 винтов 3.5, то что на плате только 4 разъёма так это не проблема, есть слот для расширения, это раз, а потом вообще-то 4 винта это самоё то, можно сказать стандарт, любители скачивания для коллекции фильмов с торрентов могут смотреть так же самое онлайн

а какой есть вариант для слота расширения, и будет ли xpynology поддерживать дополнительные винты  через карту расширения ?