fb_luc
-
Posts
21 -
Joined
-
Last visited
Posts posted by fb_luc
-
-
Hi,
take a look at this
https://drive.google.com/drive/folders/0B_6OlQ_H0PxVRXF4aFpYS2dzMEE
I don't have time to test it myself, but you can try it
-
Hi guys,
i get this error message if i start a virtual machine:
iSCSI:scsi.c:1330:vhost_scsi_ctl_handle_kick vhost_get_vq_desc(ffff8801a2400160, ffff8801a2400290, 1024, ffff8801a7327e10, ffff8801a7327e14, (null), (null)) failed, ret=-14
I have no idea how i can resolve this problem. (Maybe new driver?)
Hope you can help me.
Thank you in advance!
-
Thank you very much.
The compiling has worked for me. I used Ubuntu 14.04
I will try to insert the drivers to an image.
You could use Jun scripts in first post on thread about new-loader
I now how to do it
Thanks
-
Thank you very much.
The compiling has worked for me. I used Ubuntu 14.04
I will try to insert the drivers to an image.
-
-
They compile well with some warning , usefull to add new drivers not included in standard synology distribution.
A usefull kernel module is config.ko, it exports kernel config into /proc
Do you compile using their scripts/tools? It would've being great if you could write some instructions on what is needed to compile the kernel from source.
I will arrange a Howto in the afternoon
Would be very nice
-
Just did vid/pid and serial and time to show menu in conf.
Bios is set to boot from usb.
perc 6i set raid 5 with six drives.(shows as disk 4th sata)
What loader are you using?
I guess he is using Jun's Loader 1.01
Running r710 with no issues here.
Juns 1.01
But he wrote, that he have an PERC 6I RAID Controller. I have an "external" RAID controller (PERC H700) I will test if it works and i will tell you.
I use Jun's Loader 1.01 (DSM 6.0.2)
You have to create an RAID volume at the (Hardware) RAID controller. (e.g. RAID 5)
Then the disk(s - all RAID disks you created in Hardware RAID config) will be detected from DSM and you can run the installation. In the DSM disk manager i choose not an RAID (because only one big disk will be shown). Use "basic" instead. The "failure security" will be handled from your Hardware RAID controller.
There you go.
It works! Very nice
Thank you very much @Salah @Polanskiman
-
Just did vid/pid and serial and time to show menu in conf.
Bios is set to boot from usb.
perc 6i set raid 5 with six drives.(shows as disk 4th sata)
What loader are you using?
I guess he is using Jun's Loader 1.01
Running r710 with no issues here.
Juns 1.01
But he wrote, that he have an PERC 6I RAID Controller. I have an "external" RAID controller (PERC H700) I will test if it works and i will tell you.
-
Hi Salah,
How do you get DSM6 on R710 to the run without issues?
Running r710 with no issues here.Juns 1.01
I also have an DELL R710. I have the issue, that DSM detects no hard drives
Thank you in advance
-
Yeah, DSM 5.2 seems to work with our Dell R710 without any issues.
Maybe somebody can build the kernel modules for jun's loader DSM6.1 (Ethernet and RAID driver for R710)
Would be very nice
-
I tryed to install DSM 6.1 with Jun's loader on my R710 and it doesn't work.
The hard disks will not be activated and the Ethernet doesn't work. (No IP address)
Maybe i have to try with XPenology DSM 5.2
-
Servus,
ja, ich habe es mittlerweile lösen können. Die Angaben in der grub.cfg waren nicht schuld. Die waren ok.
Nach langen suchen in den tiefen der englischen Foren habe ich dann einen Tipp gelesen der genau mein Problem mit dem Fehler 21 beschrieb. Das vorgehen war dort so beschrieben, das ich erst bis zu dem Fehler alles machen sollte, dann einfach nochmal neu starten. Dann war ja schon irgendwas erkennbares Installiert mit DSM 6. Eben das, was er bis zum Fehler 21 immer gemacht hat. Dann sollte man auf einfach auf Migrieren gehen. Damit hat er dann tatsächlich alles sauber installiert. Zumindest bei mir ging es dann. Ich habe natürlich vorher immer nach dem Fehler wieder abgebrochen und neu angefangen mit der Fehlersuche!
Läuft nun auch super!
Sehr gut! Freut mich
-
Servus Raccoon,
hast du dein Problem gelöst?
Der Fehler 21 bei der Installation kommt eigentlich nur, wenn du in der grub.cfg die VID und PID nicht angepasst hast.
Ich habe das am Anfang auch falsch gemacht. Passe die richtig an dann müsstest du DSM erfolgreich installieren können.
Gruß
-
Hi All,
Today I tried to install XPenology on a Dell poweredge with PERC raid controller. The first steps of the tutorial went well. Running the bootloader from the USB stick succeeded. The diskstation is detected by the synology assistant, but when the webpage opens the the message ' no harddisks detected' pops up. Does anyone know how to solve this issue? Offcourse the 2 harddisks are installalled hardware wise and raid was set properly.
Any help is welcome,
Regards,
Sytse
Hi Sytse,
do you have an solution for your Problem?
I also want to install DSM 6 on a DELL Server with PERC raid controller (with Jun's Loader).
Thanks
-
Dear,
Could you add a drive for Dell PERC 6/I Integrated Adapter?
DELL PERC Chip Related LSI RAID/HBA
PERC5/i, PERC5/e, Intel IOP333 I/O Processor +
PERC5/i Integrated Internal LSISAS1068 MegaRAID SAS 8408E/8480E
PERC 6/I LSISAS1078 RAID on Chip (ROC) MegaRAID SAS 8888ELP
SAS6/ir LSISAS1068E LSI SAS 1068E
SAS5i & SAS5E LSISAS1068 LSI SAS 1068
PERC H200 LSISAS2008 LSI SAS 9211-8i
PERC H700/800 LSISAS2108 RAID-on-Chip (ROC) MegaRAID SAS 9260-8i/MegaRAID SAS 9260DE-8i
PERC H710P LSISAS2208(ROC) MegaRAID SAS 9265-8i
thank you so much.
I also need the DELL RAID driver for Jun's Loader. If somebody have this driver please tell me
I need a driver for PERC H700 Controller
Thanks
-
PXE ist nun überflüssig in meinem Fall, da mein Server tatsächlich einen internen USB Anschluss hat.
Allerdings habe ich nun das Problem, dass wenn ich vom USB boote, werden die Festplatten ausgeschaltet. (Problem bei Jun's Loader DSM 6.0 und "Alpha-Loader" DSM 6.1)
Wenn ich den "Jun's Alpha-Loader" benutze (DSM 6.1) funktionieren auch die Onboard LAN Schnittstellen nicht. (Vermutlich fehlt der Treiber)
Ich hoffe, mir kann da jemand helfen, bzw. jemand hat ein ähnliches Problem.
P.S. Werden DELL RAID Controller überhaupt unterstützt? Wenn nicht würde das erklären, warum die Platten deaktiviert werden.
-
Mit PXE wäre das auch sehr cool
Hast du damit schon Erfahrung?
Wie wäre das, wenn ich das Jun's Image nehme (als PXE Image), was muss ich dann in der GRUB Config als VID und PID setzen?
-
Vielen Dank! Das hat mich auf eine Idee gebracht. Mein System hat anscheinend auch einen internen Port.
Vielleicht hat noch jemand anderes im Forum eine Idee. Ich habe noch ein Thread im englischen Teil eröffnet.
-
Hi There,
i have an DELL Server and DSM 6.0.2 installed (with Jun's Loader) it's working very nice.
But i would like to boot this server without the "boot usb stick" plugged in.
Is there a option to create an "self boot" partition on the internal "Synology-RAID Disk"?
I already tried to clone the partition from the usb stick to the HDD but it doesn't work.
Thank you in advance
P.S. Sorry for repost
-
Hi,
hast du den Bootloader auf einem USB Stick der die ganze Zeit im PowerEdge steckt?
Ich würde gern den Bootloader mit auf der internen Platte haben. Ich habe nichts im Forum dazu gefunden ("self boot Jun's Bootloader")
Vielleicht hat jemand eine Idee, wäre cool.
Danke und Gruß
[VMM] BSOD on install
in Synology Packages
Posted
I have the same problem. In the log file you can see following error: